The CMT Fine Finish Saw Blade 292.210.48M is a precision-ground 210mm (8-1/4 in.) carbide-tipped circular saw blade engineered for clean, splinter-free cuts in hardwood, softwood, plywood, OSB, melamine, and laminate. Designed specifically for Festool metric track saws and other machines with a 30mm bore, this 48-tooth ATB blade delivers the fine finish crosscut quality that cabinet makers, finish carpenters, and woodworking professionals demand. With a 15 deg. alternate top bevel tooth geometry and a thin 0.110 in. kerf, it removes less material per pass - reducing waste and easing the load on your saw motor.

Key Features

• 48-Tooth Alternate Top Bevel (ATB) Grind at 15 deg. - the high tooth count combined with the 15 deg. bevel angle shears wood fibers cleanly rather than tearing them, producing fine finish crosscuts with minimal splintering on hardwood, softwood, plywood, and sheet goods.
• 210mm (8-1/4 in.) Diameter with 30mm Bore - matches the arbor specification of Festool track saws and compatible metric-bore machines, providing a direct-fit solution without adapters or spacers.
• Pin Hole Configuration 2/7/42 - the locating pin holes align precisely with Festool machine arbor flanges, ensuring accurate blade registration and repeatable cut quality every time.
• 0.110 in. Kerf Thickness - a thin kerf reduces cutting resistance, decreasing heat buildup and extending blade life while also conserving expensive hardwood stock.
• 0.071 in. Plate Thickness - a slim, rigid steel plate minimizes blade flex under load, contributing to straight, accurate cuts even in dense hardwoods.
• Tungsten Carbide (HW) Tipped Teeth - industrial-grade carbide tips retain their edge significantly longer than standard steel teeth, reducing sharpening frequency and downtime on the job.
• 15 deg. Hook Angle - a positive hook angle feeds material efficiently through crosscut and miter applications, balancing aggression and control for stationary table saws, radial arm saws, miter saws, and slide miter saws.

Why This Product

• If you own a Festool track saw or any metric machine requiring a 30mm bore, this blade is purpose-built for that application - the 2/7/42 pin hole pattern and 30mm arbor fit eliminate the guesswork of adapting standard imperial-bore blades.
• The 48-tooth ATB configuration at 15 deg. is optimized for fine finish crosscutting - an ideal choice when working with pre-finished plywood, melamine, or hardwood where tearout on the top face is not acceptable.
• At 0.110 in. kerf, this blade is kinder to cordless and portable circular saw motors than full-kerf alternatives, making it a practical option for job-site use as well as shop applications on stationary equipment.
• Tungsten carbide tipping paired with precision ATB sharpening means fewer blade changes over a project and consistent cut quality from the first pass to the last - particularly valuable when cutting large volumes of sheet goods like plywood and OSB.

Specifications

• Manufacturer Part Number: 292.210.48M
• Brand: CMT Orange Tools
• Diameter: 210mm (8-1/4 in.)
• Bore Diameter: 30mm
• Pin Hole: 2/7/42
• Number of Teeth: 48
• Tooth Grind: ATB (Alternate Top Bevel)
• Cutting Angle: 15 deg.
• Hook Angle: 15 deg.
• Kerf Thickness: 0.110 in.
• Plate Thickness: 0.071 in.
• Tooth Material: HW (Tungsten Carbide)

Approved Applications

• Crosscuts in hardwood
• Crosscuts in softwood
• Cutting plywood
• Cutting OSB
• General purpose industrial sawing
• Radial arm saw applications
• Stationary table saw applications
• Portable circular saw applications
• Miter saw and slide miter saw applications

Frequently Asked Questions

Is this blade compatible with Festool track saws?

Yes. This blade is designed for Festool machines. The 30mm bore diameter and the 2/7/42 pin hole pattern are configured to fit Festool track saw arbors directly. It is important to note that this blade does not feature the orange chrome coating found on some other CMT blades - it is a standard fine finish blade formatted for Festool machine compatibility.

What materials can this blade cut cleanly?

This blade is rated for hardwood, softwood, plywood, and OSB. The 48-tooth ATB grind at 15 deg. is particularly well suited to fine finish crosscutting applications where a clean, chip-free edge is required on hardwoods and sheet goods such as plywood.

What is the difference between kerf thickness and plate thickness on this blade?

The kerf thickness is 0.110 in. - this is the width of the cut the blade makes in the material, determined by the carbide tooth width. The plate thickness is 0.071 in. - this is the thickness of the steel body of the blade itself. The difference between these two measurements creates blade clearance in the cut, which reduces friction and heat during operation.

Can this blade be used on a miter saw or table saw in addition to a track saw?

Yes. In addition to track saw use, this blade is approved for radial arm saws, stationary table saws, portable circular saws, miter saws, and slide miter saws - provided those machines accept a 30mm bore and are compatible with a 210mm blade diameter.