CMT Industrial Combination Saw Blade 12" x 1" T60 4ATB+TCG is a professional-grade circular saw blade engineered for versatile cutting in demanding woodworking environments. Built with a 4 Alternate Top Bevel plus 1 Triple Chip Grind tooth pattern (4ATB+1TCG), this 60-tooth blade handles both rip cuts and crosscuts with a single setup - eliminating the need to swap blades when switching between cut directions. Finished with an Orange Shield non-stick PTFE coating and precision mirror-finish sharpening, it is designed for professional woodworkers, cabinet shops, and production environments that require consistent results across hardwood, softwood, plywood, and chipboard day after day.

Key Features

• 4ATB+1TCG Tooth Geometry - the combination of 4 Alternate Top Bevel teeth followed by 1 Triple Chip Grind tooth handles both ripping and crosscutting, so one blade does the job of two, reducing downtime and blade changes on the job.
• 60-Tooth Configuration - a high tooth count delivers fine, smooth cuts across a wide range of wood-based materials while the combination grind pattern maintains versatility for different grain orientations.
• 12 deg. Hook Angle - an aggressive positive hook angle pulls material through the cut efficiently, reducing feed resistance and operator fatigue during long ripping operations.
• Large Gullets for Deep Cuts - oversized gullets between tooth groups allow effective chip clearance during deep cuts, preventing clog-up and reducing the risk of heat buildup or blade binding.
• Orange Shield Non-Stick PTFE Coating - protects the blade body against corrosion, resin buildup, and pitch adhesion, reducing blade drag and extending cutting life between cleanings and sharpenings.
• Precision Mirror-Finish Sharpening - every tooth is ground to a mirror finish, reducing friction at the cutting edge and producing cleaner, splinter-free results on hardwood, softwood, plywood, and chipboard.
• Harmonic Laser-Cut Steel Plate - the precision-cut plate minimizes vibration and noise during operation, contributing to a smoother cut surface and reduced stress on the saw motor.
• Carbide (HW) Tooth Material - hard metal tungsten carbide tips retain sharpness through extended use in dense hardwoods and abrasive composite sheet goods, reducing sharpening frequency.
• 0.126" Kerf / 0.087" Plate - a thin kerf relative to the plate thickness means less material removed per pass and reduced load on the saw, while still maintaining blade stability at operating speed.
• 6,400 RPM Maximum Speed - rated for high-speed stationary and sliding saws, ensuring the blade can be safely used at the full operating speed of most miter saws, radial arm saws, and table saws.
• 1" (25.4mm) Bore Diameter - a standard 1-inch arbor bore fits directly onto most professional table saws and miter saws without requiring an adapter ring.

Why This Product

• One blade for ripping and crosscutting - the 4ATB+1TCG grind pattern is specifically engineered to perform both cut types cleanly, making this combination blade the right choice for shops and contractors who need flexibility without sacrificing cut quality.
• Built for high-volume daily use - tungsten carbide (HW) tips, a PTFE non-stick coating, and precision mirror-finish sharpening combine to extend sharpness and resist wear in heavy production conditions, reducing the cost of frequent blade replacement.
• Compatible with a wide range of professional machines - at 12 inches with a 1-inch bore and a 6,400 RPM rating, this blade works directly with radial arm saws, miter saws, sliding miter saws, table saws, and other special saws without requiring adapters or speed restrictions on most professional equipment.
• Effective chip clearance for deep cuts - the large gullet design is engineered specifically to handle the chip volume generated in deep cutting applications, preventing packing and the overheating that shortens blade life.

Specifications

• Manufacturer Part Number: 215.060.12
• Brand: CMT Orange Tools
• Diameter: 12"
• Number of Teeth: 60
• Bore Diameter: 25.4mm (1")
• Tooth Grind: 4 ATB 20+ 1 TCG
• Hook Angle: 12 deg.
• Kerf Thickness: 0.126"
• Plate Thickness: 0.087"
• Maximum RPM: 6,400
• Tooth Material: HW (Tungsten Carbide)
• Coating: Orange Shield Non-Stick PTFE

Approved Applications

• Rip cuts in softwood and hardwood
• Crosscuts in softwood and hardwood
• Cutting plywood and veneered panel goods
• Cutting chipboard
• Deep cuts requiring effective chip clearance

Frequently Asked Questions

What machines is this 12-inch combination blade compatible with?

This blade is designed for use with radial arm saws, miter saws, circular saws, table saws, and special saws. It has a 1-inch (25.4mm) bore diameter and a 6,400 RPM maximum speed rating, which aligns with the operating specifications of most professional stationary and sliding saws in these categories.

What does the 4ATB+1TCG tooth pattern actually do?

The tooth pattern alternates 4 Alternate Top Bevel (ATB) teeth - which score and slice wood fibers cleanly - with 1 Triple Chip Grind (TCG) tooth, which removes the center of the kerf and handles harder or more abrasive materials. This repeating combination allows the blade to perform both rip cuts and crosscuts effectively without switching blades.

What materials can this blade cut?

This blade is rated for softwood, hardwood, plywood, and chipboard. The large gullets and 4ATB+1TCG grind pattern make it suitable for both solid lumber and sheet goods in these categories.

What is the purpose of the PTFE Orange Shield coating on the blade?

The Orange Shield non-stick PTFE coating protects the blade body against corrosion, resin adhesion, and pitch buildup. It also reduces friction between the blade plate and the material being cut, which lowers heat generation and drag during cutting - contributing to longer blade life and cleaner cuts over time.