Product Description
CMT Solid Carbide Downcut Spiral Bit - 1/4 in. x 1 in. x 3 in. is a precision-ground solid carbide spiral router bit engineered for clean, tearout-free cuts on the upper face of your workpiece. Built from a special super-micrograin carbide formulation, this right-hand rotation downcut spiral bit delivers exceptional hardness and a higher transverse rupture point - meaning it resists chipping and stays sharp longer through demanding routing tasks. Whether you are working with veneer, laminate surfaces, hardwood, or sheet goods on a CNC machine or router table, this bit presses chips downward into the cut to protect the top face and produce a professional-quality finish.
Key Features
- Solid carbide construction from super-micrograin formulation - increases hardness and raises the transverse rupture point, so the bit withstands heavy use with less risk of fracture and supports more resharpenings over its lifetime.
- Downcut spiral geometry - directs chips downward into the cut rather than upward, preventing tearout and splintering on the upper surface where finish quality matters most.
- 1/4 in. cutting diameter with 1 in. cutting height - sized for controlled, precise routing passes in grooves, dadoes, and flush trimming applications where accuracy is critical.
- 1/4 in. shank with 3 in. total length - fits standard 1/4 in. collet routers and provides enough reach for a variety of workpiece thicknesses without excessive overhang.
- 2-flute design - provides a balance of chip clearance and surface finish quality, making it practical for both CNC routing and handheld router use.
- Right-hand rotation - compatible with conventional right-hand router spindles, ensuring safe and predictable operation on standard routing equipment.
Why This Product
- Upper-face finish quality is the priority - the downcut spiral geometry is the right choice when you cannot afford tearout, splintering, or fuzz on laminate, veneer, or finished hardwood faces.
- Super-micrograin carbide outperforms standard carbide-tipped bits - the entire body is solid carbide, not just the cutting edges, which means greater wear resistance and the ability to be resharpened more times before replacement.
- Versatile across machines and materials - the 1/4 in. shank fits handheld routers, router tables, and CNC routing machines, making this bit useful across a wide range of woodworking and fabrication setups.
- Compact cutting geometry for precision work - the 1/4 in. diameter and 1 in. cutting height combination keeps cuts controlled and accurate, reducing the risk of deflection or chatter during detailed routing passes.
Specifications
- Manufacturer Part Number: 192.008.11B
- Brand: CMT Orange Tools
- Diameter: 1/4 in.
- Cutting Height: 1 in.
- Total Length: 3 in.
- Shank: 1/4 in.
- Number of Teeth: 2
- Rotation: Right-hand (RH)
- Material: HWM (Super-Micrograin Solid Carbide)
- Bit Type: Downcut Spiral
- Product Class: Router Cutter
Approved Applications
- CNC Routing
- Upper-face finish routing where tearout prevention is critical
- Veneer and laminate routing
- Solid hardwood routing
- Plywood, MDF, and chipboard routing
- Melamine and plastic routing
- Handheld router use
- Router table use
Frequently Asked Questions
What is the difference between a downcut and an upcut spiral bit, and when should I use this bit?
A downcut spiral bit pushes chips downward into the cut, which holds the top surface of the workpiece firmly and prevents tearout and splintering on the upper face. An upcut bit evacuates chips upward, which is better for deep cuts needing chip clearance but can cause fuzz or tearout on the top surface. Use this downcut bit whenever the finish quality of the upper face is critical - such as when routing veneer, laminate, or finished hardwood where the top surface will be visible.
What machines is this bit compatible with?
This bit features a 1/4 in. shank and right-hand rotation, making it compatible with handheld routers, router tables, and CNC routing machines that accept a standard 1/4 in. collet. Always confirm your machine's collet size before use.
Why is solid carbide construction significant compared to carbide-tipped bits?
Solid carbide bits are made entirely from carbide material rather than having only carbide tips brazed onto a steel body. The super-micrograin formulation used in this bit increases overall hardness and raises the transverse rupture point, which means the bit is more resistant to chipping and fracture under load. Solid carbide bits can also be resharpened more times than carbide-tipped bits, extending the usable life of the tool.
What materials can this downcut spiral bit cut?
This solid carbide downcut spiral bit is suited for routing solid hardwood, softwood, plywood, MDF, chipboard, laminate, melamine, and plastic. The downcut geometry makes it especially effective on composite sheet goods and surface-finished materials where the top face must remain clean and free of tearout.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.