Product Description
The CMT 192.000.02 Solid Carbide 5-Piece Downcut Spiral Bit Set from CMT delivers precision cutting performance across a wide range of routing applications. This set covers diameters from 4.76mm (3/16 in.) up to 12.7mm (1/2 in.), giving woodworkers and CNC operators a complete selection of solid carbide spiral bits in a single package. Downcut spiral geometry pushes chips downward during cutting, protecting the top surface of your workpiece from tearout - making this router bit set an ideal choice for veneer, laminate, and any project where upper-face finish quality is the priority.
Key Features
- 5-Piece Spiral Bit Set covering 3/16 in. to 1/2 in. diameters - a ready-to-use collection that eliminates the need to purchase individual bits, giving you the right diameter for routing slots, dadoes, and profiles in varying widths without extra sourcing.
- Solid carbide (HWM micrograin) construction - harder and more wear-resistant than carbide-tipped alternatives, meaning longer service life between sharpenings and consistent cutting performance across demanding materials.
- 2-flute negative (downcut) spiral geometry - channels chips downward rather than upward, preventing fraying and tearout on the top face of the material so you get a clean, finished edge without additional sanding or post-processing.
- Right-hand (RH) rotation - compatible with standard router table, handheld router, and CNC routing machine spindles, so these bits integrate directly into your existing tooling setup without special adapters.
- Shank sizes from 1/4 in. to 1/2 in. - the smaller diameter bits use 1/4 in. shanks and the larger bits step up to 1/2 in. shanks, matching collet sizes commonly found on both light-duty routers and full-size router tables or CNC machines.
Why This Product
- For anyone routing veneer, laminate, melamine, or other surfaces where the top face must remain pristine, the downcut spiral geometry solves the tearout problem at the source rather than requiring cleanup after the cut.
- Purchasing this 5-piece set rather than individual bits means you have a matched suite of CMT solid carbide spiral router bits spanning 3/16 in. through 1/2 in. - covering the most commonly needed widths for dadoes, grooves, and profile routing in a single solution.
- Solid carbide construction allows more resharpenings than carbide-tipped bits, so the long-term cost per cut is lower for shops that run these bits regularly on hardwood, softwood, plywood, MDF, or plastic.
- With both 1/4 in. and 1/2 in. shank options represented within the set and right-hand rotation, these bits work across handheld routers, router tables, and CNC routing machines without requiring a separate purchase for each machine type.
Specifications
- Manufacturer Part Number: 192.000.02
- Brand: CMT Orange Tools
- Product Type: Downcut Spiral Router Bit Set
- Number of Pieces: 5
- Diameters Included: 4.76mm (3/16 in.), 6.35mm (1/4 in.), 8mm, 9.5mm, 12.7mm (1/2 in.)
- Shank Diameter: 1/4 in. - 1/2 in.
- Number of Flutes: 2 NEG
- Rotation: Right-hand (RH)
- Blade Material: Solid Carbide (HWM)
- Spiral Direction: Downcut
Approved Applications
- CNC Routing
- Upper-face finish routing where tearout must be avoided
- Veneer and laminate routing
- Dado and groove cutting in hardwood and softwood
- Routing MDF, plywood, chipboard, and melamine
- Plastic routing
What's Included
- 3/16 in. diameter downcut spiral bit (1/4 in. shank)
- 1/4 in. diameter downcut spiral bit (1/4 in. shank)
- 5/16 in. diameter downcut spiral bit (1/2 in. shank)
- 3/8 in. diameter downcut spiral bit (1/2 in. shank)
- 1/2 in. diameter downcut spiral bit (1/2 in. shank)
Frequently Asked Questions
What is the difference between a downcut and an upcut spiral bit?
A downcut spiral bit has flutes oriented so chips are pushed downward during cutting. This protects the top face of the workpiece from fraying and tearout, which is critical when routing veneered panels, laminated surfaces, or melamine. An upcut spiral bit pushes chips upward, which aids chip evacuation but can cause tearout on the upper face. The bits in this set are downcut, making them the correct choice when top-face surface quality is the priority.
Which machines are compatible with this downcut spiral bit set?
These bits are designed for right-hand (RH) rotation spindles, which are standard on handheld routers, router tables, and CNC routing machines. The set includes bits with both 1/4 in. and 1/2 in. shanks, so you will need a router or CNC spindle equipped with the matching collet size for each bit in the set.
What materials can these solid carbide spiral bits cut?
Solid carbide construction (HWM micrograin grade) makes these bits well-suited for cutting solid hardwood, softwood, plywood, MDF, chipboard, laminates, melamine, and plastic. The downcut geometry is especially advantageous on materials with decorative or fragile surface layers where keeping the top face clean is essential.
Why does shank size change across the bits in this 5-piece set?
The smaller diameter bits (3/16 in. and 1/4 in.) use 1/4 in. shanks, which are appropriate for lighter router platforms and match the collets most commonly available on compact routers. The larger diameter bits (5/16 in., 3/8 in., and 1/2 in.) use 1/2 in. shanks, which provide greater rigidity and stability needed to support the increased cutting forces at those diameters. This shank sizing approach is standard practice in solid carbide spiral router bit design.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.