Product Description
CMT 190.508.11B Solid Carbide Up/Downcut Spiral Flush Trim Bit is a double-bearing compression spiral router bit engineered for clean, chip-free cuts on both faces of a workpiece simultaneously. Built from premium solid micrograin carbide, this 1/2 in. flush trim bit is designed for CNC routing machines, router tables, and handheld routers where professional two-face finish quality is required in plywood, MDF, laminates, melamine, and hardwood. The simultaneous up and downcut spiral geometry compresses material from both surfaces at once, eliminating tearout and face chipping on through-cuts - making it the go-to bit for demanding cabinet, millwork, and laminate fabrication work.
Key Features
- Solid Micrograin Carbide Construction - the entire bit body is manufactured from premium micrograin carbide (not just the tips), delivering superior wear resistance, longer tool life between sharpenings, and the ability to be resharpened more times than carbide-tipped alternatives, reducing long-term tooling cost.
- Up/Downcut Compression Spiral Geometry (2 + 2 Teeth) - two upcut and two downcut flutes work in tandem to shear material from the top and bottom face simultaneously, producing chip-free, tearout-free surfaces on both sides of the cut without secondary sanding or cleanup.
- Double Bearing Guide - two precision bearings positioned on the bit provide stable, accurate template following and prevent bit deflection during flush trim operations, resulting in precise edge-to-edge consistency across the full 1 7/8 in. cutting height.
- 1/2 in. Shank with 4 1/2 in. Total Length - the robust 1/2 in. shank maximizes collet grip and minimizes vibration at high feed rates, while the extended 4 1/2 in. total length provides clearance for deep workpieces and CNC through-cut operations.
- Right-Hand Rotation (RH) - compatible with all standard right-hand router spindles, CNC routing machines, and router table setups without any special configuration required.
- 1 7/8 in. Cutting Height with 5/8 in. Upper Cutting Zone - the generous overall cutting height handles a wide range of material thicknesses in a single pass, while the distinct 5/8 in. upper cutting height dimension provides precise geometry for template-guided flush trim applications.
Why This Product
- The compression spiral design solves the single biggest challenge in CNC through-cuts and flush trimming of plywood, MDF, and laminates - face chipping. By cutting upward and downward at the same time, both surfaces stay clean without requiring backing boards or climb cuts.
- Solid micrograin carbide construction means this bit can withstand the abrasive demands of MDF, chipboard, and laminated panels far longer than standard carbide-tipped flush trim bits, making it a practical choice for high-volume production environments.
- The double-bearing configuration provides an extra margin of accuracy and stability during template routing, reducing the risk of bit wander or edge inconsistency - critical when flush trimming cabinet faces, countertops, or laminated panels where a clean, straight edge is required.
- With a 1/2 in. shank and 4 1/2 in. total length, this bit is sized for serious production use - compatible with full-size CNC routing machines and heavy-duty router tables where smaller-shank bits would flex or chatter under load.
Specifications
- Manufacturer Part Number: 190.508.11B
- Brand: CMT Orange Tools
- Product Type: Up/Downcut Spiral Flush Trim Router Bit with Double Bearing
- Diameter: 1/2 in.
- Cutting Height: 1 7/8 in.
- Upper Cutting Height: 5/8 in.
- Total Length: 4 1/2 in.
- Shank Diameter: 1/2 in.
- Number of Teeth: 2 + 2
- Rotation: Right-Hand (RH)
- Blade Material: Solid Carbide (HWM)
- Bearing Configuration: Double Bearing
Approved Applications
- CNC Routing - through-cuts and profile routing in sheet goods
- Flush Trimming - template-guided edge trimming on hardwood, plywood, and laminates
- Two-Face Finish Cuts - applications requiring chip-free surfaces on both the top and bottom face simultaneously
- Plywood and MDF Through-Cuts
- Laminate and Melamine Panel Trimming
- Solid Hardwood and Softwood Edge Work
- Chipboard and Plastic Routing
Frequently Asked Questions
What is the difference between this bit and a standard upcut or downcut spiral flush trim bit?
A standard upcut spiral pulls chips upward, which can cause tearout on the top face of a workpiece. A downcut spiral pushes chips downward, risking tearout on the bottom face. This bit uses a compression geometry with 2 upcut and 2 downcut flutes working simultaneously, shearing material cleanly from both faces at once - eliminating tearout on either side during a through-cut. This makes it the appropriate choice for laminated panels, melamine, and plywood where both faces must remain chip-free.
What is the purpose of the double bearing on this flush trim bit?
The double bearing configuration provides two contact points against the template or workpiece edge rather than one. This improves stability and guidance during flush trim operations, reduces the chance of bit deflection or rocking under lateral cutting forces, and helps maintain consistent edge accuracy across the full 1 7/8 in. cutting height - particularly important on longer or unsupported workpiece edges.
What machines is this bit compatible with?
This bit is designed for use in CNC routing machines, router tables, and handheld routers equipped with a 1/2 in. collet. It uses right-hand (RH) rotation, which is the standard direction for virtually all production routers and CNC spindles. Always confirm your machine accepts a 1/2 in. shank before use.
What materials can this bit cut effectively?
The solid micrograin carbide construction makes this bit well suited for cutting solid hardwood, softwood, plywood, MDF, chipboard, laminates, melamine, and plastic. The compression spiral geometry is especially effective in engineered sheet goods such as plywood, MDF, and melamine-faced panels where tearout-free surfaces on both faces are required in a single pass.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.