Product Description
The CMT ITK-Plus Finish Sliding Compound Blade 12" x 1" T72 ATB+Shear is a premium 72-tooth circular saw blade engineered specifically for 12-inch sliding compound miter saws. Built with an Alternate Top Bevel (ATB) tooth geometry at 15 deg. and a 7 deg. cutting angle, this blade delivers clean, splinter-free finish cuts in hardwood, softwood, plywood, and double-sided laminated panels. Whether you are trimming molding, making precise crosscuts, or working through demanding sheet goods, the ITK-Plus design provides the accuracy and edge quality that finish carpentry work demands.
Key Features
- ATB+Shear 15 deg. Tooth Geometry - the Alternate Top Bevel grind shears fibers cleanly rather than tearing them, resulting in smooth, finish-quality cuts that require minimal sanding or cleanup.
- 72 Carbide Teeth - the high tooth count increases the number of cuts per revolution, producing finer surface quality on hardwood, softwood, plywood, and double-sided laminate with less material tearout.
- 7 deg. Hook Angle - the low positive hook angle controls feed rate and bite, reducing the risk of grabbing on sliding compound miter saws and improving cut quality on dense hardwoods.
- 0.102" Kerf Thickness with 0.071" Plate - the thin kerf removes less material per cut, reducing load on the saw motor and minimizing waste on expensive lumber and sheet goods.
- HW (Hard Metal / Carbide) Tooth Material - tungsten carbide cutting edges hold sharpness longer than standard steel, extending the interval between resharpenings and keeping cut quality consistent over many uses.
- 1" (25.4mm) Bore Diameter - fits the standard arbor size of most 12-inch sliding compound miter saws, making installation straightforward and secure.
- 6400 Maximum RPM Rating - rated for the high-speed operation typical of sliding compound miter saws, ensuring safe performance at full operating speed.
Why This Product
- Purpose-built for sliding compound miter saws - the 12-inch diameter, 1-inch bore, and low 7 deg. hook angle are matched to the dynamics of sliding compound miter machinery, where blade control and finish quality are critical on every cut.
- Handles demanding finish materials cleanly - the 72-tooth ATB+Shear configuration is engineered for hardwood, softwood, plywood, and double-sided laminated panels, so one blade covers a wide range of finish carpentry and millwork applications.
- High tooth count for finish-grade results - with 72 teeth and an ATB grind, this blade is designed to produce cut surfaces ready for finish work, reducing the extra steps needed after cutting.
- Thin kerf design protects your saw and your material - the 0.102" kerf reduces strain on the saw and minimizes material loss per cut, making it a practical choice for precision work where both power draw and material cost matter.
Specifications
- Manufacturer Part Number: P12072S
- Brand: CMT Orange Tools
- Diameter: 12"
- Number of Teeth: 72
- Bore Diameter: 25.4mm (1")
- Tooth Grind Type: ATB 15 deg.
- Cutting Angle: 7 deg.
- Kerf Thickness: 0.102"
- Plate Thickness: 0.071"
- Maximum RPM: 6400
- Tooth Material: HW (Hard Metal Carbide)
Approved Applications
- Finish cuts on sliding compound miter saws
- Crosscutting hardwood
- Crosscutting softwood
- Cutting plywood
- Cutting double-sided laminated panels
Frequently Asked Questions
What saws is this blade designed for?
This blade is designed for use on 12-inch sliding compound miter saws. It has a 1-inch (25.4mm) bore diameter and a maximum RPM rating of 6400, which matches the operating characteristics of standard sliding compound miter machinery.
What materials can this blade cut?
This blade is recommended for hardwood, softwood, plywood, and double-sided laminated panels. The 72-tooth ATB+Shear geometry is optimized for producing clean, finish-quality edges in these materials.
What does ATB+Shear tooth geometry mean for cut quality?
ATB stands for Alternate Top Bevel, which means alternating teeth are ground at opposing angles - in this case 15 deg. - so they shear across wood fibers rather than crushing them. This geometry is specifically suited to finish cutting applications where surface quality and minimal tearout are priorities.
Why does the hook angle matter on a sliding compound miter saw?
The hook angle determines how aggressively the blade pulls into the material. This blade uses a 7 deg. hook angle, which is a low positive value that controls the rate at which the blade feeds, improving stability and cut quality on the sliding action of a compound miter saw - particularly when working with hardwoods or laminated sheet goods.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.