The CMT ITK Contractor Saw Blade Ultra Finish 7-1/4" x 5/8" T60 ATB is engineered for ultra-fine finishing cuts on portable table saws, delivering the smooth, splinter-free results that trim carpenters and finish woodworkers demand. With 60 alternating top bevel teeth and a precise 15 deg. hook angle, this hardmetal-tipped circular saw blade minimizes tearout and produces glass-level surface quality in demanding crosscut applications. The thin kerf design reduces material waste and requires less drive power, making it a practical choice for portable jobsite setups where efficiency matters.

Key Features

• 60-Tooth ATB Geometry at 10 deg. Bevel Angle - the high tooth count combined with alternating top bevel sharpening shears wood fibers cleanly on every pass, producing ultra-fine finishes that require little to no sanding on crosscuts.
• 15 deg. Hook Angle - a moderate positive hook angle keeps the blade feeding smoothly and predictably through stock, reducing the risk of grabbing or chipping on finish-grade materials.
• 0.071" Kerf Thickness - the thin kerf removes less material per cut, lowering the force required from the motor and making this blade well-suited for portable table saws operating on jobsite power.
• 0.047" Plate Thickness - the slim steel plate keeps the blade lightweight and reduces flexing during cuts, helping maintain straight, accurate kerfs through sheet goods and dimensional lumber.
• Hardmetal (HW) Tipped Teeth - tungsten carbide tips retain a sharp cutting edge significantly longer than steel, extending blade service life and reducing the frequency of replacements on active job sites.
• 5/8" Bore Diameter - the standard 5/8" bore (15.87mm) fits the arbors found on most portable table saws and circular saws, allowing straightforward installation with no adapters needed.
• 10,000 RPM Rating - rated for up to 10,000 RPM, this blade handles the higher spindle speeds found on corded and high-performance cordless saws without compromising safety or performance.

Why This Product

• Purpose-built for ultra finishing on a portable table saw - while many 60-tooth blades are marketed broadly, this ITK Contractor blade is specifically classed for portable table saw use, meaning its geometry and plate dimensions are optimized for the vibration characteristics and arbor configurations of that machine type.
• High tooth count delivers finish quality without a secondary tool - at 60 ATB teeth, this blade produces results clean enough for visible trim, cabinetry faces, and melamine without requiring a separate finish pass, saving time on the job.
• Thin kerf reduces load on smaller motors - at 0.071" kerf and 0.047" plate, the blade draws less power per cut, making it a practical pairing with portable saws that have more modest motor ratings than stationary cabinet saws.
• 10,000 RPM rating provides a generous safety margin - running well within that limit on typical portable table saws means the blade operates in a stable, controlled range, supporting consistent, repeatable cut quality throughout the workday.

Specifications

• Manufacturer Part Number: K06007
• Brand: CMT Orange Tools
• Diameter: 7-1/4"
• Number of Teeth: 60
• Tooth Grind: ATB (Alternate Top Bevel)
• Sharpening Angle: 10 ATB
• Cutting Angle: 15 deg.
• Kerf Thickness: 0.071"
• Plate Thickness: 0.047"
• Bore Diameter: 15.87mm (5/8")
• Maximum RPM: 10,000
• Tooth Material: HW (Hardmetal / Tungsten Carbide)
• Series: ITK Contractor Ultra Finish

Approved Applications

• Ultra finishing cuts on portable table saws
• Fine crosscuts in wood, plywood, and similar sheet materials
• Trim carpentry and cabinetry finish work requiring minimal tearout

Frequently Asked Questions

What machines is this blade compatible with?

This blade is designed for use with portable table saws. Its 5/8" bore (15.87mm) and 7-1/4" diameter are standard sizing for that machine class, and its 10,000 RPM rating accommodates the spindle speeds typical of portable table saw models.

What does the ATB tooth grind mean for cut quality?

ATB stands for Alternate Top Bevel, meaning each tooth is ground at an opposing bevel angle - in this case 10 ATB. This configuration slices wood fibers from both sides of the kerf alternately, which dramatically reduces tearout and produces a smooth, ultra-fine surface finish on crosscuts.

Why does the kerf thickness matter when choosing a saw blade?

Kerf thickness determines how much material the blade removes with each pass and how much resistance the motor must overcome. At 0.071" kerf, this blade removes a narrower channel of material than thicker-kerf alternatives, which reduces the power demand on the saw motor - an important consideration for portable table saws - while also conserving more of the workpiece material.

What is the maximum safe operating speed for this blade?

This blade is rated for a maximum of 10,000 RPM. Always verify that your saw's spindle speed does not exceed this rating before mounting the blade. Operating a blade beyond its rated RPM is unsafe and will void any performance expectations.