CMT Xtreme Demolition Saw Blade - 6 1/2" x 5/8" 24T - 10 Pack is a professional-grade circular saw blade engineered for the most demanding demolition cutting applications. Offered in a 10-piece bulk masterpack, this CMT blade delivers sustained performance when cutting through wood with embedded nails, pressure-treated lumber, OSB, laminated beams, and demolition debris. Its patented low mass plate design and Orange Shield chromium coating set it apart for contractors relying on both cordless and corded circular saws where efficiency and blade longevity are non-negotiable.

Key Features

• Patented Low Mass Plate Design - reduces blade mass and minimizes heat buildup during cutting, translating directly into more cuts per battery charge and greater cutting efficiency with cordless saws
• Alternate Top Bevel (ATB) 5 deg. Tooth Grind - a 5 deg. cutting angle optimized for demolition material, producing cleaner cuts and reducing tooth wear when contacting mixed debris including nails
• Loose Nail Application Testing - CMT tested these blades in a loose nail scenario where the nail can move slightly during cutting, a more rigorous real-world standard than a fully embedded nail test, ensuring longer tool life under demanding conditions
• Orange Shield Coating - CMT's exceptional trademarked chromium coating protects the blade body against corrosion and extends service life through repeated demolition use
• 0.090" Kerf with 0.049" Plate Thickness - a thin yet sturdy plate geometry reduces material removal and saw motor load, helping preserve battery runtime and reducing operator fatigue
• 9,500 Maximum RPM Rating - supports high-speed cutting on a wide range of cordless and corded circular saws without risk of over-spinning
• 5/8" Bore with Knock-Out Pin Hole - the 15.88mm bore with knock-out adapter accommodates multiple arbor configurations, broadening compatibility across saw models
• 10-Pack Bulk Masterpack Quantity - purchasing in a 10-piece pack lowers per-blade cost and keeps crews stocked for extended demolition projects without frequent re-ordering

Why This Product

• Contractors cutting through nail-embedded wood, OSB, or laminated beams can rely on a blade tested under loose nail conditions - the harder real-world test - rather than the easier fully embedded nail standard used by competing brands
• The patented low mass plate design was purpose-built for use with cordless circular saws, delivering more cuts per charge so crews spend less time swapping batteries on the job site
• The ATB 5 deg. tooth geometry combined with a 0.090" kerf gives demolition professionals a blade that handles aggressive ripping and crosscutting through mixed demolition materials without premature tooth failure
• Buying 10 blades in a single bulk masterpack is a practical solution for large demolition crews or multi-site contractors who need consistent blade performance available throughout a project

Specifications

• Manufacturer Part Number: 286.324.06-X10
• Brand: CMT Orange Tools
• Diameter: 6 1/2"
• Bore Diameter: 15.88mm (5/8")
• Pin Hole: Knock Out
• Number of Teeth: 24
• Tooth Grind: ATB 5
• Cutting Angle: 5 deg.
• Kerf Thickness: 0.090"
• Plate Thickness: 0.049"
• Maximum RPM: 9,500
• Material: HW
• Quantity: 10-piece bulk masterpack

Approved Applications

• Demolition cutting
• Wood with embedded nails
• Pressure-treated lumber
• OSB
• Laminated beams
• Ripping
• Crosscuts

Frequently Asked Questions

What makes the low mass plate design beneficial for cordless saw users?

The patented low mass plate design reduces overall blade mass and minimizes heat generated during cutting. Less heat and less mass mean the saw motor works more efficiently, resulting in more cuts per battery charge - a direct advantage for contractors using cordless circular saws on demolition sites.

How does CMT test these blades for nail-cutting performance?

CMT tests the Xtreme Demolition blades using a loose nail application, where the nail is allowed to move slightly during cutting. This is a more demanding test than the fully embedded nail test used by some competitors, in which nails are held firmly in place by surrounding wood. The loose nail test more closely reflects real demolition cutting conditions.

What bore size and arbor compatibility does this blade have?

This blade features a 15.88mm (5/8") bore diameter with a knock-out pin hole. The knock-out design allows the blade to fit multiple arbor configurations, making it compatible with a wide range of cordless and corded circular saws.

Is the 10-pack quantity confirmed, and are the blades identical within the pack?

Yes. The product is sold as a 10-piece bulk masterpack (MPN: 286.324.06-X10). Each blade in the pack shares the same specifications - 6 1/2" diameter, 24-tooth ATB 5 deg. grind, 0.090" kerf, 0.049" plate thickness, and 9,500 maximum RPM - making the pack ideal for stocking crews working extended demolition projects.