Product Description
The CMT 282.060.12X Industrial Panel Sizing Saw Blade is a 300mm circular saw blade engineered by CMT for demanding industrial panel sizing operations. Designed for use on panel sizing machines, this blade handles sizing of single sheets and multiple panels with precision and consistency. Its Triple Chip Grind tooth geometry and 60-tooth configuration make it a dependable choice for high-production environments where clean, accurate cuts through laminated panel materials are required repeatedly and reliably.
Key Features
- 300mm blade diameter - sized for horizontal panel sizing machines, providing the reach needed to crosscut full sheets and stacked multiple panels in a single pass.
- 60 teeth (T60) - a high tooth count that spreads the cutting load across more cutting edges, resulting in smoother cut surfaces and reduced chipping on panel edges.
- Triple Chip Grind (TCG) tooth geometry - alternating flat and chamfered teeth that reduce tearout on hard laminate surfaces, making this blade well-suited for sizing plastic-laminated sheet goods.
- 16 deg. cutting angle - a positive hook angle that promotes efficient chip evacuation and helps maintain feed rates on industrial panel sizing equipment.
- 4.4mm kerf thickness with a 3.2mm plate - the blade body is thinner than the kerf, providing side clearance that reduces binding and heat buildup during extended production runs.
- HW (tungsten carbide) tooth material - industrial-grade carbide tips that retain a sharp cutting edge through repeated sizing cycles, extending time between sharpenings.
- 75mm bore diameter - matches the arbor specification of common industrial panel sizing machine spindles, ensuring direct, secure mounting without adapter rings.
Why This Product
- The TCG tooth form combined with a 60-tooth count addresses one of the most common challenges in panel sizing - edge chipping on plastic-laminated surfaces - by distributing cutting forces and reducing surface tearout with each pass.
- With a 4.4mm kerf and 3.2mm plate, this blade provides the side clearance geometry that panel sizing machines need to run cleanly at production feed rates without blade deflection or overheating.
- The 75mm bore and 300mm diameter are matched to the spindle and blade guard dimensions of industrial horizontal panel sizing machines, making this a direct-fit replacement or upgrade blade for compatible equipment.
- The HW carbide tooth construction supports the high-cycle demands of industrial sheet sizing operations, where a blade must perform consistently across large quantities of panels before requiring resharpening.
Specifications
- Manufacturer Part Number: 282.060.12X
- Brand: CMT Orange Tools
- Blade Series: 282
- Diameter: 300mm
- Bore Diameter: 75mm
- Number of Teeth: 60
- Kerf Thickness: 4.4mm
- Plate Thickness: 3.2mm
- Cutting Angle: 16 deg.
- Sharpening / Grind Type: TCG (Triple Chip Grind)
- Tooth Material: HW (Tungsten Carbide)
- Blade Class: Industrial Panel Sizing
Approved Applications
- Sizing single sheets on industrial panel sizing machines
- Sizing multiple stacked panels on industrial panel sizing machines
- Crosscutting laminated panel goods on horizontal panel sizing equipment
Frequently Asked Questions
What type of machine is the CMT 282.060.12X designed for?
This blade is designed for use on industrial panel sizing machines. The 300mm diameter and 75mm bore are matched to the spindle specifications found on horizontal panel sizing equipment used in industrial sheet goods production environments.
What does TCG (Triple Chip Grind) mean and why does it matter for panel sizing?
Triple Chip Grind refers to a tooth geometry that alternates between a flat-topped tooth and a chamfered raker tooth. This configuration reduces chipping and surface tearout when cutting laminated panel materials - a critical advantage when sizing plastic-laminated sheets where clean edges are required on the finished panels.
Can this blade size both single sheets and multiple panels at once?
Yes. According to the product specifications, this blade is rated for sizing single sheets and multiple panels, making it suitable for both individual sheet processing and stacked or multi-panel sizing passes on compatible industrial panel sizing machines.
What is the difference between the kerf thickness and the plate thickness on this blade?
The kerf thickness is 4.4mm - this is the width of the cut made by the carbide teeth. The plate thickness is 3.2mm - this is the thickness of the steel body of the blade. The difference between these two measurements provides side clearance, which helps prevent the blade body from rubbing against the kerf walls, reducing friction, heat, and binding during continuous cutting cycles.
Reviews
FAQs
Standard Shipping is free on most orders over $50 within the contiguous US. If the order is under $50.00, the shipping is $9.99 set fee for shipping within the contiguous US.
Most of our products will ship within 1 to 3 Business Days. Some Special order products will ship within 2 to 5 Business Days. Preorders will be shipped to you on a first come first serve basis as soon as available from the manufacturer. Items that are "Made-to-Order" (Custom order products) will be shipped when fabrication is completed, shipping and delivery times will vary and depend on manufacturing.
Products that are shipped directly from the manufacturer will have processing and fulfilment times subject to manufacturer availability.
Preorders are shipped on a first come first serve basis as soon as available from the manufacturer, the sooner you place your Preorder the sooner your order will ship.
Freight shipping Policy:
Orders/Items too large or heavy may require special handling/Shipping and may require to be sent by truck. Someone must be present to accept truck deliveries. Standard truck delivery is to a dock facility designed to receive freight. You will be notified within 24 hours of ordering to confirm delivery. Lift gates for deliveries are available for an additional fee.
We offer Financing options through Clicklease
Please email your Return request to info@FactoryDirectSupplyOnline.com
Include the order number and the reason for your return.
All returns, regardless of their categorization, must include all original parts, be in their original packaging, and in the condition in which they were received. You may not qualify to receive a refund If the returned item is used, damaged, missing any parts, or is damaged during return shipping.
Checkout our complete Return policy
You can contact us through our contact page! We will be happy to assist you.