The CMT Orange Chrome Heavy-Duty Fine Finish Saw Blade - 10" x 5/8", 60-Tooth TCG is engineered for woodworkers and shop professionals who demand smooth, chip-free results when cutting chipboard, MDF, laminate, hardwood, and plywood. The Triple Chip Grind (TCG) tooth geometry excels at producing clean edges on laminated and composite materials where surface tearout is a common problem. With a 10 deg. cutting angle and a 60-tooth configuration, this blade strikes the ideal balance between feed rate and finish quality in heavy-duty production environments. Designed for use on radial arm saws, miter saws, table saws, and special saws, it is a versatile solution for both fine finish crosscutting and multi-purpose panel processing.

Key Features

• Triple Chip Grind (TCG) Tooth Geometry - alternating flat and chamfered teeth shear through laminates, MDF, chipboard, and hardwood cleanly, virtually eliminating chipping and tearout on finished surfaces.
• 60-Tooth Configuration - a higher tooth count produces finer cuts with each pass, reducing the need for secondary sanding or edge cleanup on finished panels and hardwood stock.
• 10 deg. Cutting Angle - a positive hook angle keeps the blade feeding smoothly and efficiently through dense materials like hardwood and laminate without bogging down.
• Hardmetal (HW) Carbide Teeth - industrial-grade carbide tips maintain edge retention over extended use, delivering consistent cut quality on demanding materials before resharpening is needed.
• 0.126" Kerf Thickness with 0.087" Plate - the generous side clearance supports a stable, vibration-damping cut, while the thinner plate reduces material waste and lowers motor load on the saw.
• 5/8" Bore Diameter (15.88mm) - the standard 5/8" arbor fits directly onto most North American miter saws, table saws, and radial arm saws without adapters.
• Orange Chrome Surface Coating - the chromium finish resists corrosion and pitch buildup, protecting the plate from heat and moisture that can warp or degrade uncoated blades over time.
• 7,600 Maximum RPM Rating - a high-speed rating provides compatibility with the full range of stationary and portable saws used in professional shop environments.

Why This Product

• When cutting laminate, melamine-coated chipboard, or MDF, surface tearout is a persistent challenge - the TCG tooth grind on this blade addresses that problem directly by shearing material cleanly rather than tearing it, delivering results that require minimal finishing work.
• With 60 teeth and a 10 deg. hook angle, this blade is purpose-built for fine finish cuts on hardwood, plywood, and composite panels, making it a single-blade solution for shops that process a wide range of sheet goods and solid wood.
• The 5/8" bore and 7,600 RPM maximum rating mean this blade installs and runs on the radial arm saws, miter saws, and table saws already in most woodworking shops - no special tooling or adapters required for standard setups.
• The orange chrome coating is not just cosmetic - it actively resists pitch, resin, and corrosion buildup that shortens blade life on uncoated alternatives, helping maintain consistent performance through repeated use on sticky or dense materials.

Specifications

• Manufacturer Part Number: 281.660.10
• Brand: CMT Orange Tools
• Diameter: 10"
• Number of Teeth: 60
• Bore Diameter: 15.88mm (5/8")
• Tooth Grind Type: TCG (Triple Chip Grind)
• Kerf Thickness: 0.126"
• Plate Thickness: 0.087"
• Cutting Angle: 10 deg.
• Maximum RPM: 7,600
• Material (Carbide Type): HW (Hardmetal)
• Coating: Orange Chrome

Approved Applications

• Heavy-duty multi-purpose cutting
• Fine finish crosscuts in hardwood
• Cutting chipboard and particle board
• MDF processing
• Laminate and melamine-coated panel cutting
• Plywood sheet goods

Frequently Asked Questions

What is TCG tooth geometry and why does it matter for laminate and MDF cutting?

TCG stands for Triple Chip Grind, a tooth configuration that alternates between a flat-topped raker tooth and a chamfered corner tooth. This pattern shears through hard, abrasive materials like laminate, MDF, and chipboard without chipping the surface finish - a significant advantage over standard alternating top bevel (ATB) grinds, which can cause tearout on coated or composite panels.

What saws is this blade compatible with?

This blade is designed for use on radial arm saws, miter saws, table saws, and special saws. The 5/8" bore (15.88mm) fits the standard arbor size found on most of these machines, and the 7,600 maximum RPM rating is compatible with the operating speeds of typical stationary and benchtop models in these categories.

What is the difference between kerf thickness and plate thickness on this blade?

The kerf thickness (0.126") is the total width of the cut the blade makes through the material - this is determined by the width of the carbide teeth, which are slightly wider than the steel plate. The plate thickness (0.087") is the thickness of the steel body of the blade itself. The gap between these two measurements is the side clearance that prevents the plate from binding in the cut and helps reduce heat buildup during use.

Is this blade suitable for cutting solid hardwood in addition to sheet goods?

Yes. The product data confirms this blade is designed to cut hardwood as well as chipboard, MDF, laminate, and plywood. The 60-tooth count and 10 deg. cutting angle make it well suited for fine finish results on both solid hardwood pieces and composite or laminated sheet goods in a multi-purpose shop environment.