The CMT ITK Xtreme Sliding Fine Finish Saw Blade is an 8-1/2 in. x 5/8 in., 60-tooth circular saw blade engineered for compound sliding miter saws and stationary table saws that demand flawless results. With an Alternate Top Bevel grind at 15 deg. and a 7 deg. hook angle, this blade slices cleanly through hardwood, plywood, veneered wood, melamine, MDF, and molding with minimal tearout - making it a reliable choice for finish carpentry, cabinet work, and trim cutting where surface quality is critical.

Key Features

• 60-Tooth ATB 15 deg. Grind - the high tooth count combined with a 15 deg. Alternate Top Bevel geometry produces ultra-smooth, splinter-free cuts in veneered panels, melamine, and fine hardwoods, reducing the need for secondary sanding or finishing.
• 7 deg. Hook Angle - a controlled, low hook angle reduces aggressiveness and material grabbing, giving the blade stable, predictable feed behavior on sliding compound miter saws and table saws alike.
• Tri-Metal Silver-Copper-Silver Brazing - the special Tri-Metal Brazing method bonds carbide teeth with a Silver-Copper-Silver layer that handles high stress and impact, particularly when cutting harder woods and composite materials, so teeth stay secure under demanding conditions.
• Precision Body Flatness via Special Straightening Processes - blade body flatness obtained via special straightening processes guarantees exceptionally reduced tolerances, resulting in accurate, wobble-free cuts and consistent kerfs across every pass.
• Full Balancing on Every Blade - balancing performed on all saw blades guarantees maximum stability at operating speeds, reducing vibration transmitted to the saw and the workpiece for cleaner results and longer tool life.
• Thin Kerf Design (0.094 in. kerf / 0.055 in. plate) - the slender kerf removes less material per cut, reducing heat buildup and strain on the motor, which is especially beneficial on corded 10 in. and 12 in. sliding miter saws.
• Hardmetal (HW) Carbide Teeth - industrial-grade carbide construction extends cutting life across abrasive composite materials like MDF and melamine, maintaining sharpness well beyond standard steel alternatives.
• 9,000 RPM Maximum Speed - the blade is rated to 9,000 RPM, providing a wide compatibility window with high-speed portable and stationary table saws as well as sliding miter saws.

Why This Product

• Purpose-built for sliding compound miter saws - the ITK Xtreme line is specifically optimized for 10 in. and 12 in. corded sliding compound miter saws, meaning the geometry, tooth count, and body tolerances are dialed in for the long crosscut strokes these machines demand, rather than being a general-purpose blade adapted after the fact.
• Fine finish results across a wide range of panel and solid wood materials - the 60-tooth ATB profile handles everything from solid hardwood to veneered panels, melamine, MDF, and molding in a single blade, reducing the need to swap blades between material types on the job.
• Carbide teeth bonded for durability under impact - Tri-Metal Silver-Copper-Silver brazing is engineered to keep teeth bonded even when cutting harder composite materials, addressing one of the most common failure points in fine-finish blades used on dense or abrasive substrates.
• Reduced tolerances for consistent, repeatable accuracy - body flatness obtained via special straightening processes and full blade balancing means the cut quality stays consistent throughout the life of the blade, which matters in production environments and detail trim work where repeatability is as important as initial sharpness.

Specifications

• Manufacturer Part Number: 253.060.08
• Brand: CMT Orange Tools
• Diameter: 8-1/2 in.
• Bore Diameter: 5/8 in. (15.88mm)
• Number of Teeth: 60
• Tooth Grind: ATB 15
• Hook Angle: 7 deg.
• Kerf Thickness: 0.094 in.
• Plate Thickness: 0.055 in.
• Maximum RPM: 9,000
• Tooth Material: HW (Hardmetal Carbide)
• Tooth Brazing: Tri-Metal Silver-Copper-Silver

Approved Applications

• Fine finish compound sliding cuts
• Crosscuts in hardwood
• Plywood cutting
• Veneered wood
• Melamine panel cutting
• MDF
• Molding

Frequently Asked Questions

What machines is this blade compatible with?

This blade is designed for use on miter saws, slide miter saws, stationary table saws, and portable table saws. It is specifically optimized for 10 in. and 12 in. corded sliding compound miter saws.

What is the maximum safe operating speed for this blade?

This blade is rated for a maximum of 9,000 RPM. Always confirm your saw's operating speed does not exceed this rating before use.

Why does this blade use Tri-Metal brazing instead of standard single-metal brazing?

The special Silver-Copper-Silver Tri-Metal Brazing allows the carbide teeth to handle high stress and impact, especially when cutting harder woods and composite materials like melamine and MDF. This bonding method provides greater tooth retention compared to single-layer alternatives.

What does "body flatness obtained via special straightening processes" mean in practice?

It means the steel plate of each blade is processed to achieve exceptionally reduced tolerances in flatness. Combined with full blade balancing, this results in maximum stability during cutting, reduced vibration, and consistently accurate kerfs - particularly important in fine finish applications where even minor blade wobble can cause tearout or misaligned cuts.