CMT 226.060.12 Metal and Steel Dry Cut Saw Blade is a 12-inch, 60-tooth industrial circular saw blade engineered for clean, dry cutting of metal and steel without the need for coolant or cutting fluid. Designed for use on circular saws, miter saws, and chop miter saws, this blade handles a wide range of structural materials including channel, studs, angles, plates, pipes, and rods. The flat with alternate chamfer (FWF) tooth geometry at 0 deg. cutting angle delivers burr-free results that are ready to use immediately after the cut, making it a reliable choice for metal fabrication, construction framing, and mechanical trade work.

Key Features

• 60-Tooth Flat with Alternate Chamfer (FWF) Grind at 8 deg. Sharpening Angle - this engineered tooth geometry is optimized for medium and thick metal and steel stock, producing clean, burr-free cuts that require no secondary deburring or finishing work.
• 0 deg. Cutting Angle (Hook Angle) - the neutral hook angle controls feed rate during cutting, reducing the tendency for the blade to grab or self-feed into metal, which improves operator control and cut accuracy.
• Maximum 2,000 RPM Rating - the blade is rated for up to 2,000 RPM, making it compatible with standard circular saws, miter saws, and chop miter saws commonly used for dry metal cutting applications.
• Hard Metal (HW) Carbide Tooth Material - hard metal carbide tips maintain cutting edge integrity through demanding cuts in steel channels, angles, pipes, rods, and flat plates, extending the working life of the blade compared to standard steel teeth.
• 0.087" Kerf Thickness with 0.071" Plate Thickness - the wider kerf relative to the plate provides blade clearance during the cut, reducing friction and heat buildup during dry metal cutting where no coolant is used.
• 25.4mm (1 inch) Bore Diameter - the standard bore fits common arbors on circular saws, miter saws, and chop miter saws without requiring an adapter, making installation straightforward.
• 12-Inch Blade Diameter - the large 12-inch diameter provides cutting capacity for a wide range of metal profiles including structural steel angles, pipe, EMT conduit, and flat bar stock.

Why This Product

• Dry cutting means no coolant required - this blade is specifically designed as an industrial dry cutter, eliminating the mess and setup time associated with wet cutting systems while still delivering clean results in metal and steel.
• Cuts a broad range of metal profiles - from channel and studs to pipes, rods, angles, and plates, one blade handles the variety of steel shapes encountered in structural, mechanical, and trade work, reducing the need to swap blades between tasks.
• Engineered for miter and chop miter saws - the 0 deg. hook angle and 60-tooth FWF grind are matched to the operating characteristics of miter saws and chop miter saws, the machines most commonly used for repetitive crosscuts in metal framing and fabrication.
• Medium and thick material capacity - with 60 teeth and hard metal carbide tips, this blade is rated for medium to thick metal stock, making it the appropriate choice when cutting heavier gauge steel profiles that would dull a lighter-duty blade quickly.

Specifications

• Manufacturer Part Number: 226.060.12
• Brand: CMT Orange Tools
• Blade Diameter: 12"
• Number of Teeth: 60
• Bore Diameter: 25.4mm
• Tooth Grind Type: FWF (Flat with Alternate Chamfer)
• Sharpening Angle: 8 deg.
• Cutting Angle: 0 deg.
• Kerf (Tooth) Thickness: 0.087"
• Plate Thickness: 0.071"
• Maximum RPM: 2000
• Tooth Material: HW (Hard Metal Carbide)
• Material Category: Metal and Steel - Medium to Thick

Approved Applications

• Cutting metal channels and studs
• Cutting steel angles
• Cutting plates and flat bars
• Cutting pipes and tubes
• Cutting rods
• Dry cutting of metal and steel without coolant
• Use on circular saws, miter saws, and chop miter saws

Frequently Asked Questions

Does this blade require coolant or cutting fluid during use?

No. This is an industrial dry cutter circular saw blade specifically designed to cut metal and steel without coolant or cutting fluid. The FWF tooth grind and hard metal carbide tips are engineered to manage heat during dry cutting conditions.

What machines is this blade compatible with?

This 12-inch blade is designed for use on circular saws, miter saws, and chop miter saws. It has a 25.4mm (1 inch) bore diameter that fits standard arbors on these machines. The maximum rated speed is 2,000 RPM - always confirm your machine does not exceed this rating before use.

What types of metal and steel can this blade cut?

This blade is designed to cut channel, studs, angles, plates, pipes, rods, and similar medium to thick metal and steel profiles. It is not intended for cutting wood, composites, or non-metallic materials.

What does the FWF tooth grind mean and why does it matter for metal cutting?

FWF stands for Flat with Alternate Chamfer - a tooth geometry where alternating teeth feature a chamfered edge. This configuration is engineered specifically for cutting metal and steel, promoting clean, burr-free cuts that reduce or eliminate the need for secondary deburring after the cut. The 0 deg. cutting angle combined with 8 deg. sharpening further supports controlled, accurate cutting in metallic materials.