The CMT Industrial Combination Saw Blade 10" x 5/8" T50 4ATB+1TCG is a professional-grade circular saw blade engineered for woodworkers and cabinet shops that demand clean, accurate cuts in both ripping and crosscut applications. Built with a 4 Alternate Top Bevel plus 1 Triple Chip Grind tooth configuration and a precision 12 deg. cutting angle, this blade handles soft and hard wood, plywood, and chipboard with equal confidence - making it a single, versatile solution for mixed cutting tasks at the table saw, miter saw, radial arm saw, or portable circular saw.

Key Features

• 4ATB + 1TCG Tooth Grind Pattern (4 Alternate Top Bevel + 1 Triple Chip Grind) - the alternating bevel teeth slice cleanly across grain while the triple chip grind tooth clears material aggressively, producing smooth edges on both rip cuts and crosscuts with a single blade.
• 12 deg. Cutting Angle - this positive hook angle pulls material into the cut efficiently, reducing operator effort and improving feed rate consistency during heavy-production ripping and crosscutting sessions.
• 50-Tooth Combination Configuration - provides enough tooth count for clean crosscut finishes while the large gullets between tooth groups allow rapid chip evacuation for deeper rip cuts without clogging or burning.
• 0.126" Kerf Thickness with 0.087" Plate Thickness - the thin plate reduces blade drag and motor load, while the kerf still provides enough body rigidity to track straight through hardwoods and dense sheet goods.
• HW (Tungsten Carbide) Tooth Material - industrial-grade carbide retains a sharp cutting edge far longer than standard steel, meaning fewer blade changes and lower cost per cut in high-volume shop environments.
• 5/8" Bore Diameter (15.88mm) - fits the standard arbor size found on the majority of 10" table saws, miter saws, and radial arm saws, making installation straightforward without adapters.
• 7,600 Maximum RPM Rating - rated for the higher spindle speeds common on professional miter saws and table saws, providing confidence that the blade is engineered for full-power production use.
• Large Gullets Between Tooth Groups - accelerate chip clearance during deep cuts, reducing heat build-up at the blade plate and extending cutting performance between sharpenings.
• Orange Shield Non-Stick PTFE Coating - resists resin build-up, corrosion, and pitch adhesion, keeping the blade running freely and reducing friction-related heat that can cause warping or burn marks on workpieces.

Why This Product

• One blade for two operations - the 4ATB + 1TCG combination geometry eliminates the need to swap between a dedicated rip blade and a crosscut blade, saving setup time and reducing tooling investment in busy shop environments.
• Compatible with the most common professional machines - the 10" diameter and 5/8" bore fit radial arm saws, miter saws, circular saws, and table saws, making this blade easy to integrate into a shop without purchasing multiple blade sizes.
• Handles a wide range of wood-based sheet goods - soft wood, hard wood, plywood, and chipboard are all approved cutting materials, making this combination blade a practical choice for cabinetry, millwork, and general carpentry where material types vary job to job.
• Rated at 7,600 RPM for high-speed professional equipment - many combination blades are rated conservatively; this blade is engineered for the actual operating speeds of industrial table saws and sliding miter saws, reducing concern about over-speed conditions during normal production use.

Specifications

• Manufacturer Part Number: 215.050.10
• Brand: CMT Orange Tools
• Diameter: 10"
• Number of Teeth: 50
• Bore Diameter: 15.88mm (5/8")
• Tooth Grind Type: 4 ATB 20+ 1 TCG
• Kerf Thickness: 0.126"
• Plate Thickness: 0.087"
• Cutting Angle: 12 deg.
• Maximum RPM: 7,600
• Tooth Material: HW (Tungsten Carbide)
• Coating: Orange Shield Non-Stick PTFE

Approved Applications

• Rip cuts in soft wood and hard wood
• Crosscuts in soft wood and hard wood
• Cutting plywood and veneered panel goods
• Cutting chipboard and composite sheet material

Frequently Asked Questions

What machines is this 10" combination blade compatible with?

This blade is designed for use on radial arm saws, miter saws, circular saws, table saws, and special saws equipped with a 5/8" arbor. The 10" diameter and 15.88mm bore fit the standard arbor size on most professional 10" machines.

What does the 4ATB + 1TCG tooth pattern mean, and why does it matter?

The 4 Alternate Top Bevel teeth are ground at 20 deg. and slice cleanly across wood fibers for smooth crosscut edges, while the 1 Triple Chip Grind tooth in each group removes material in the center of the kerf and clears chips rapidly. Together, this pattern allows the blade to produce acceptable results in both ripping and crosscutting without changing blades.

What is the maximum RPM rating for this blade?

This blade is rated to a maximum of 7,600 RPM. Always verify that your saw's spindle speed does not exceed this rating before mounting the blade.

Can this blade cut plywood and chipboard in addition to solid wood?

Yes. The approved cutting materials for this blade include soft wood, hard wood, plywood, and chipboard. The large gullets in the tooth configuration assist with chip clearance when cutting sheet goods, helping to maintain cut quality and reduce heat build-up at the blade plate.