CMT 284.700.10 Thin Non-Ferrous Metal and Plastics Saw Blade is a 10-inch, 96-tooth circular saw blade engineered by CMT for precision cutting of aluminum, brass, copper, PVC, and other non-ferrous metals. Designed for industrial-grade performance on radial arm saws, miter saws, table saws, and special saws, this blade's Triple Chip Grind (TCG) tooth geometry delivers clean, burr-free results on thin-walled extrusions and non-ferrous profiles. Whether you're processing aluminum sheet stock, copper pipe, or rigid PVC, the 284.700.10 provides the control and clean-cut quality that fabricators and woodworking shops demand.

Key Features

• 96-Tooth Triple Chip Grind (TCG) Geometry - alternating flat and chamfered teeth cut cleanly through non-ferrous metals and PVC without grabbing, chipping, or leaving rough burrs, reducing secondary finishing work.
• 6 deg. Cutting Angle - a positive 6 deg. hook angle maintains controlled, stable blade engagement across aluminum, brass, copper, and PVC, reducing the risk of material lift or blade climb during cutting.
• 10-inch Diameter with 5/8-inch Bore (15.88mm) - fits standard 5/8-inch arbors on miter saws, radial arm saws, and table saws, making this blade easy to mount on widely available shop equipment without adapters.
• 0.126-inch Kerf / 0.098-inch Plate Thickness - a thin kerf design removes less material per pass, reducing waste and cutting resistance while maintaining a stable plate for accurate, repeatable cuts.
• Hardmetal (HW) Carbide Teeth - industrial-grade tungsten carbide tooth tips hold a sharp edge longer under the demanding conditions of cutting non-ferrous metals, extending time between resharpenings.
• 7,600 Maximum RPM Rating - rated for high-speed operation on professional-grade radial arm saws, miter saws, and table saws, delivering fast throughput on production and fabrication applications.
• Excellent Performance on Thin-Walled Extrusions - specifically optimized for heavy-duty cutting of thin-walled aluminum and non-ferrous extrusions, with good performance on thick-walled extrusions as well.
• Industrial Classification (SBFKXT) - built to industrial application standards, this blade is suited for production environments, not just occasional shop use, meaning it can handle the repetitive demands of commercial fabrication.

Why This Product

• Built for non-ferrous metal and PVC in one blade - instead of stocking multiple blades for aluminum, copper, brass, and PVC applications, this single 96-tooth TCG blade handles all of these materials on the same saw, simplifying tool changes and blade inventory.
• Optimized for thin-stock extrusions where blade choice matters most - thin-walled aluminum and non-ferrous extrusions are prone to tearing, burring, and deformation under the wrong blade geometry; the TCG grind and 6 deg. cutting angle are specifically noted for excellent results on these demanding profiles.
• Compatible with the most common shop saws - the standard 5/8-inch bore and 10-inch diameter mount directly on radial arm saws, miter saws, table saws, and special saws without requiring reducers or special adapters, saving setup time.
• High-speed rated for production cutting - at 7,600 RPM maximum, this blade is rated well above many competing blades, allowing it to keep pace with high-speed industrial and professional miter saws without being a speed bottleneck on the production floor.

Specifications

• Manufacturer Part Number: 284.700.10
• Brand: CMT Orange Tools
• Diameter: 10 in.
• Bore Diameter: 15.88mm (5/8 in.)
• Number of Teeth: 96
• Tooth Grind: TCG (Triple Chip Grind)
• Cutting Angle: 6 deg.
• Kerf Thickness: 0.126 in.
• Plate Thickness: 0.098 in.
• Maximum RPM: 7,600
• Tooth Material: HW (Hardmetal Carbide)

Approved Applications

• Cutting aluminum, including thin-walled and thick-walled extrusions
• Cutting brass and copper
• Cutting PVC and non-ferrous metals
• Industrial thin-stock non-ferrous metal processing
• Heavy-duty cutting on radial arm saws
• Crosscuts and finish cuts on miter saws and table saws
• Special saw applications in fabrication and production environments

Frequently Asked Questions

What saws is the CMT 284.700.10 compatible with?

This blade is designed for use on radial arm saws, miter saws, table saws, and special saws. It mounts on any saw with a standard 5/8-inch (15.88mm) arbor and accepts a 10-inch blade.

What is Triple Chip Grind (TCG) tooth geometry and why does it matter for non-ferrous cutting?

TCG tooth geometry features alternating flat-top and chamfered (trapezoidal) teeth. This alternating pattern breaks up the cut, preventing material from grabbing onto the blade and reducing burring or chipping at the cut edge - qualities that are especially important when cutting aluminum, copper, brass, and PVC where clean edges matter.

Is this blade suitable for both thin-walled and thick-walled aluminum extrusions?

Yes. The 284.700.10 is noted as excellent on thin-walled extrusions and good on thick-walled extrusions. Its 96-tooth TCG grind and 6 deg. cutting angle are specifically optimized for heavy-duty cutting of non-ferrous profiles in both configurations.

What is the maximum safe operating speed for this blade?

The maximum rated speed is 7,600 RPM. Always verify that your saw's no-load RPM does not exceed this rating before installing the blade, as exceeding the maximum RPM is a safety hazard.