CMT Chrome Combination Saw Blade 10" x 5/8" T50 ATB+TCG by CMT is engineered for woodworkers who need a single blade that handles both ripping and crosscutting without a swap. The 50-tooth combination grind - alternating 4 ATB teeth with 1 TCG tooth per group - delivers clean cuts through hardwood, softwood, plywood, veneered plywood, melamine, and chipboard on miter saws, slide miter saws, stationary table saws, and portable table saws alike.

Key Features

• 50-Tooth 4 ATB + 1 TCG Combination Grind - the repeating pattern of 4 Alternate Top Bevel teeth followed by 1 Triple Chip Grind tooth handles both ripping and crosscutting in a single setup, eliminating mid-job blade changes and saving time on the jobsite or in the shop.
• 12 deg. Hook Angle - a positive 12 deg. cutting angle provides aggressive feed with controlled chip removal, reducing tear-out on sensitive materials like melamine and veneered plywood.
• 0.126" Kerf with 0.087" Plate - the generous kerf-to-plate ratio provides the necessary clearance to prevent binding while keeping material waste to a minimum on every pass.
• 5/8" Bore Diameter (15.88 mm) - fits the standard arbor size found on the widest range of 10-inch miter saws and table saws, making this blade a direct fit for most common workshop machines.
• 7,600 RPM Maximum Speed - rated for high-speed operation so the blade keeps pace with fast-feed production cutting without compromising safety margins.
• Hard Metal (HW) Carbide Teeth - tungsten carbide tips stay sharp longer through dense hardwoods and abrasive composite sheet goods, extending the interval between resharpenings.
• Orange Chrome Coating - a chromium layer electrolytically deposited on the plate increases wear resistance, protects against corrosion, and extends overall blade service life in demanding shop environments.
• Precision-Sharpened Teeth - each tooth is sharpened to tight tolerances, delivering consistent cut quality and a longer usable lifetime between sharpening cycles.
• Laser-Cut Steel Plate - laser cutting produces tight dimensional tolerances across the plate, contributing to stable, accurate cutting performance pass after pass.
• Polymer-Filled Sound-Dampening Slots - laser-cut slots filled with polymer material reduce vibration and audible noise during operation, improving comfort during extended cutting sessions.

Why This Product

• One blade replaces two - the 4 ATB + 1 TCG tooth geometry handles both rip cuts and crosscuts across hardwood, softwood, plywood, melamine, and chipboard, so there is no need to stock or switch between a dedicated rip blade and a crosscut blade.
• Broad machine compatibility - the 10" diameter and standard 5/8" bore fit miter saws, slide miter saws, stationary table saws, and portable table saws, making this a versatile option for both stationary shop work and portable jobsite setups.
• Built for demanding materials - the hard metal carbide teeth and chrome-coated plate are suited for abrasive sheet goods like melamine and chipboard that wear down lesser blades quickly, keeping performance consistent over time.
• High-speed rated at 7,600 RPM - this rating provides a comfortable safety margin above the operating speeds of most 10-inch table saws and miter saws, ensuring the blade is appropriate for production-pace cutting without risk of overspeed.

Specifications

• Manufacturer Part Number: 285.650.10
• Brand: CMT Orange Tools
• Diameter: 10"
• Number of Teeth: 50
• Bore Diameter: 15.88 mm (5/8")
• Tooth Grind Type: 4 ATB 20 deg. + 1 TCG
• Hook Angle: 12 deg.
• Kerf Thickness: 0.126"
• Plate Thickness: 0.087"
• Maximum RPM: 7,600
• Tooth Material: HW (Hard Metal Carbide)
• Coating: Orange Chrome

Approved Applications

• Ripping - solid hardwood and softwood
• Crosscutting - solid hardwood and softwood
• Cutting plywood and veneered plywood
• Cutting melamine
• Cutting chipboard

Frequently Asked Questions

What machines is this blade compatible with?

This 10-inch combination blade is designed for use on miter saws, slide miter saws, stationary table saws, and portable table saws. The 5/8" bore diameter (15.88 mm) fits the standard arbor on the vast majority of these machines.

What does the 4 ATB + 1 TCG tooth configuration do?

The tooth pattern repeats groups of 4 Alternate Top Bevel (ATB) teeth followed by 1 Triple Chip Grind (TCG) tooth. The ATB teeth handle clean crosscuts and slice wood fibers effectively, while the TCG tooth clears the kerf and handles the heavier material removal associated with ripping. Together they allow one blade to perform both operations across hardwood, softwood, plywood, veneered plywood, melamine, and chipboard.

What is the maximum safe operating speed for this blade?

The blade is rated for a maximum of 7,600 RPM. Always verify that your saw does not exceed this speed before mounting the blade, and follow all safety guidelines provided by your machine manufacturer.

Can this blade cut melamine and chipboard cleanly?

Yes. The combination of hard metal (HW) carbide teeth, a 12 deg. hook angle, and precision-sharpened ATB geometry is suited for cutting melamine and chipboard - materials that are more abrasive than solid wood. The chrome-coated plate also helps protect against the additional wear these materials can cause.