The Simpson Titen Turbo 3/16 in. x 1-1/4 in. Hex-Head Concrete and Masonry Screw Anchor is a high-performance fastener engineered by Simpson Strong-Tie for fast, reliable anchoring into concrete and masonry. At the heart of its design is a patented Torque Reduction Channel that addresses the most common frustrations with conventional concrete screw anchors - binding, stripping, and snapping - by giving drilling dust a dedicated path away from the threads. The result is a screw anchor that drives smoothly, seats securely, and delivers consistent holding power whether you are fastening wood to concrete, anchoring hardware, or tackling other dry interior structural applications.

Key Features

• Torque Reduction Channel between the threads - traps drilling dust where it cannot obstruct thread action, dramatically reducing binding, stripping, and snapping during installation so you finish the job without wasted fasteners or lost time.
• Code listed per ICC-ES AC193 and IAPMO UES ER-712 - no pre-cleaning of the drilled hole is required for concrete applications, saving a step on every single anchor point.
• Serrated screw point - starts more easily when fastening through wood before hitting the concrete substrate, giving you a cleaner, more controlled entry.
• Compatible with standard ANSI drill bits - no matched-tolerance or specialty bit required, so there is no extra tooling to track down or purchase before you can begin.
• Zinc plated with a baked-on ceramic coating - provides a durable, corrosion-resistant finish suited to the dry interior environments where this anchor is approved for use.
• Designed for a cordless drill or impact driver with a 1/4 in. hex drive - works with the tools already on your belt, making installation fast and straightforward on the job site.

Why This Product

• Engineered to eliminate the most common concrete screw failures - the Torque Reduction Channel is a purpose-built solution to the binding, stripping, and snapping that plague standard masonry screw anchors, giving you more reliable results on every installation.
• Saves time at every stage of the job - no hole cleaning before driving and no specialty drill bit to source means fewer steps between drilling and a fully seated, load-ready anchor.
• Code-listed confidence for concrete applications - ICC-ES AC193 and IAPMO UES ER-712 compliance means this anchor meets recognized standards, supporting use on projects where documentation and code compliance matter.
• Trusted Simpson Strong-Tie engineering in a compact anchor format - the same brand known for structural connectors and load-bearing hardware brings that same focus on performance and consistency to this everyday concrete and masonry fastening solution.

Specifications

• MPN: TNT18114H
• Brand: Simpson Strong-Tie
• Diameter: 3/16 in.
• Length: 1-1/4 in.
• Head Type: Hex Head
• Drive Type: 1/4 in. Hex
• Material: Carbon Steel
• Coating: Zinc Plated with Ceramic Coating
• Color: Blue
• Installation Tool: Cordless drill or impact driver with standard ANSI drill bit
• Packaging: Packs of 100 and Cartons of 1600

Approved Applications

• Concrete anchoring applications (ICC-ES AC193 / IAPMO UES ER-712 code listed)
• Masonry anchoring applications
• Wood-to-concrete fastening
• Dry interior environments only

Frequently Asked Questions

Do I need a special matched-tolerance drill bit to install the Titen Turbo?

No. A matched-tolerance bit is not required. The Titen Turbo is designed for installation using a standard ANSI drill bit, simplifying setup and reducing the need for specialty tooling.

What makes the Titen Turbo different from standard concrete screw anchors?

The Titen Turbo features a patented Torque Reduction Channel located between the threads. This channel gives drilling dust a place to go, significantly reducing torque-related issues such as binding, stripping, and snapping that can occur with conventional screw anchors.

Is the Titen Turbo code listed for use in concrete applications?

Yes. The Titen Turbo is code listed in accordance with ICC-ES AC193 for concrete applications and does not require cleaning dust from predrilled holes prior to installation (IAPMO UES ER-712).

Can the Titen Turbo be used in outdoor or wet environments?

No. The Titen Turbo TNT18114H is intended for use in dry interior environments only and is not rated for outdoor, wet, or corrosive conditions.

Note: Product dimensions and/or thread length may differ from picture. Please refer to the specifications listed above for accurate product details.