Simpson SET3G10 (SET-3G) High-Strength Epoxy Adhesive from Simpson Strong-Tie is a professional-grade, epoxy-based anchoring adhesive engineered for anchoring threaded rod and rebar into cracked and uncracked concrete. Formulated as a 1:1 ratio, two-component system, SET-3G delivers superior bond strengths and proven performance across a wide range of installation environments - including dry concrete, water-saturated concrete, water-filled holes, and submerged concrete - making it a trusted solution for demanding structural and seismic applications.

Key Features

• Exceptional performance - superior bond strengths permit ductile solutions in high seismic areas
• Recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions
• Design flexibility - improved sustained load performance at elevated temperature
• Jobsite versatility - can be specified for all base material conditions when in-service temperatures range from - 40 deg.F ( - 40 deg.C) to 176 deg.F (80 deg.C)
• Manufactured in the USA using global materials
• 8.5 oz. coaxial cartridge
• Tested in accordance with ICC-ES AC308 (ESR-4057), ACI 355.4 and applicable ASTM test methods
• Approved for installation with multiple vacuum-drill bit systems without further hole cleaning; see Code Report (ESR-4057) for approved systems
• Low-odor formula mixes to a uniform gray color when properly combined
• Substrate installation temperature range from 40 deg.F (4 deg.C) to 100 deg.F (38 deg.C)

Specifications

• MPN: SET3G10
• Brand: Simpson Strong-Tie
• Capacity: 8.5 oz.
• Cartridge Type: Coaxial, 1:1 ratio two-component
• Mix Ratio: 1:1
• Mixed Color: Uniform gray
• Substrate Installation Temperature Range: 40 deg.F (4 deg.C) to 100 deg.F (38 deg.C)
• In-Service Temperature Range: - 40 deg.F ( - 40 deg.C) to 176 deg.F (80 deg.C)
• Country of Origin: United States

Approved Applications

• Threaded rod anchor and rebar dowel installations in cracked and uncracked concrete under a wide variety of environmental installation and use conditions
• Installation in downward, horizontal and upwardly inclined (including overhead) orientations
• Qualified for use in structures assigned to Seismic Design Categories A through F
• Use in dry concrete, water-saturated concrete, water-filled holes, and submerged concrete

What's Included

Each pack contains (1) EMN22i mixing nozzle and (1) nozzle extension are supplied with each cartridge.

Frequently Asked Questions

Is SET-3G suitable for use in wet or submerged concrete conditions?

Yes. SET-3G is formulated to install and perform in a variety of environmental conditions, including dry concrete, water-saturated concrete, water-filled holes, and submerged concrete.

What mixing nozzle should be used with SET-3G?

Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair SET-3G adhesive performance. Each cartridge is supplied with one EMN22i mixing nozzle and one nozzle extension.

Is SET-3G approved for seismic applications?

Yes. SET-3G's superior bond strengths permit ductile solutions in high seismic areas, and it is qualified for use in structures assigned to Seismic Design Categories A through F. It is also recognized per ICC-ES AC308 for post-installed rebar development and splice length design provisions.

Does SET-3G require hole cleaning when used with vacuum-drill bit systems?

SET-3G is approved for installation with multiple vacuum-drill bit systems without further hole cleaning. Refer to Code Report ESR-4057 for the list of approved systems.

Downloads and Resources

• Simpson SET-3G (direct replacement for the discontinued SET-XP10) is a high-strength epoxy adhesive that's been formulated for anchoring threaded rod
• Safety Data Sheets for SET-3G High-Strength Epoxy Adhesive