The Simpson H16 18-Gauge Galvanized Hurricane Tie is a high-capacity structural connector from Simpson Strong-Tie engineered to resist high winds and seismic forces by positively connecting trusses and rafters to the top plate of wood framing walls. The presloped seat of 5:12 simplifies installation, improves performance, and ensures a tight fit with reduced deflection. Long straps accommodate truss heel heights up to 13-1/2 inches, making this tie suitable for a wide range of framing applications involving both solid-sawn and engineered lumber.

Key Features

• Provides a connection between the truss or rafter and the wall of the structure that helps resist wind forces
• The presloped seat of 5:12 provides a tight fit and reduced deflection
• Great for connecting 2x deck joists on top of a perpendicular beam
• Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
• Use also for a variety of connections where one member crosses another
• Long straps increase versatility - suitable for truss heel height up to 13-1/2 inches
• Made from 18-gauge steel
• Galvanized (G90) for extra corrosion resistance
• Made in the United States

Specifications

• Model Number: H16
• Gauge: 18
• Width (in.): 1-5/8
• Length (in.): 18-3/4
• Coating/Finish: Zinc Galvanized, G90
• Country of Origin: United States
• Install With: 10d x 1-1/2 in. nails, 1/4 x 2-1/4 in. Titen screws and 1/4 x 1-3/4 in. Titen screws (sold separately)
• Minimum Heel Height: 4 inches
• Maximum Truss Heel Height: 13-1/2 inches
• Preslope: 5/12 (acceptable truss/rafter pitch: 3/12 to 7/12)

Approved Applications

• Connecting trusses and rafters to the top plate of wood framing walls
• Connecting 2x deck joists on top of a perpendicular beam
• A variety of connections where one framing member crosses another
• Solid-sawn and engineered lumber framing applications
• Exterior and treated-wood applications where corrosion resistance is required

Downloads and Resources

• Seismic and Hurricane Ties. View Specifications
• Seismic and Hurricane Ties / Lateral Truss Anchor. View Specifications

Frequently Asked Questions

What is the preslope angle of the H16 hurricane tie, and what pitches are acceptable?

The H16 is presloped at 5/12. A truss or rafter pitch ranging from 3/12 to 7/12 is acceptable for use with this tie.

What fasteners are required to install the H16?

The H16 should be installed with 10d x 1-1/2 in. nails, 1/4 x 2-1/4 in. Titen screws, or 1/4 x 1-3/4 in. Titen screws depending on the substrate.

Do hurricane ties replace solid blocking in a framing assembly?

No. Hurricane ties do not replace solid blocking. Solid blocking must still be installed as required by the framing design.

What is the minimum and maximum heel height compatible with the H16?

The minimum heel height for the H16 is 4 inches. The long straps of the H16 allow it to accommodate truss heel heights up to 13-1/2 inches.

Related Products

• Nails 0.148" x 1-1/2"
• TNT25214H
• TNT25134H

Note: Hurricane ties do not replace solid blocking. Minimum heel height for the H16 is 4 inches. H16 is presloped at 5/12; truss/rafter pitch of 3/12 to 7/12 is acceptable.