The Simpson HTS30C HTS 30 in. 14-Gauge Galvanized Heavy Twist Strap (Centered Bend) by Simpson Strong-Tie provides a reliable tension connection between two wood members, resisting heavy uplift loads at the rafter or heel of a truss. This economical twist strap delivers a simple, versatile solution for a wide range of structural connections, joining and reinforcing joints with ease on either the wide or narrow face of lumber.

Key Features

• The 3-3/4 in. bend section eliminates interference at the transition points between wood members
• Twist centered in strap with 15-in. segments
• Made from 14-gauge steel
• Galvanized (G90) for extra corrosion resistance
• Straps do not need to be wrapped over the truss to achieve the allowable load
• Available with the bend reversed - specify "-REV" after the model number (e.g., HTS30C-REV)
• Versatile with many lengths offered to fit the specific application
• Can be used back-to-back on a piece of lumber without fastener interference
• Made in the United States

Specifications

• Model Number: HTS30C
• Length: 30 in.
• Gauge: 14
• Thickness: 68 mil
• Coating: Zinc Galvanized, G90
• Finish: Zinc Galvanized, G90
• Bend Section: 3-3/4 in.
• Segment Length: 15 in. (each side of centered twist)
• Installation Fasteners: 10d common nails or 10d x 1-1/2 in. nails; Nails 0.148 x 3" AND Nails 0.148" x 1-1/2" (sold separately)
• Country of Origin: United States

Approved Applications

• Tension connection between two wood members
• Resisting uplift at the heel of a truss
• Rafter-to-plate and truss heel connections
• Light repairs and heavy-duty structural projects
• Connections on the wide or narrow face of lumber

Frequently Asked Questions

What is the purpose of the centered twist in the HTS30C strap?

The twist is centered in the strap, creating two equal 15-in. segments on either side. This design provides a tension connection between two wood members and resists uplift at the heel of a truss economically, without requiring the strap to be wrapped over the truss to achieve the allowable load.

What does the 3-3/4 in. bend section do?

The 3-3/4 in. bend section eliminates interference at the transition points between wood members, allowing for a clean, secure connection where two members meet at an angle.

What fasteners are required to install the HTS30C?

Install with 10d common nails or 10d x 1-1/2 in. nails (0.148 x 3" AND 0.148" x 1-1/2"). Use all specified fasteners, with half into each member being connected, to achieve the listed loads.

Is the HTS30C available with the bend in the opposite direction?

Yes. The HTS30C is available with the bend reversed. To order the reversed version, specify "-REV" after the model number (for example, HTS30C-REV).

Related Products

• Nails 0.148 x 3"
• Nails 0.148" x 1-1/2"

Note: Product dimensions and/or Screw or Bolt holes may differ from picture. Please see item description for specifications.