{"title":"Freud | Diablo | Avanti | Circular Saw Blades | Wood Cutting","description":"","products":[{"product_id":"freud-d0760a-diablo-7-1-4-x-60-tooth-ultra-fine-finishing-circular-saw-blade-with-5-8-arbor-and-diamond-knockout-single-blade","title":"Diablo 7-1\/4\" x 60T Ultra Finish Saw Blade D0760","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 7-1\/4\" x 60-Tooth Ultra Finish Saw Blade\u003c\/strong\u003e is engineered for woodworkers and finish carpenters who demand clean, chip-free results on every cut. Designed by Diablo for use with corded and cordless circular saws, this 60-tooth ATB blade delivers ultra finish crosscuts and rip cuts through hardwoods, plywood, melamine, and veneered sheet goods - producing surfaces that require little to no sanding. Whether you are trimming cabinet panels, cutting oak molding, or ripping melamine-coated board, this blade brings professional-grade finish quality to the jobsite and the shop.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide teeth specifically engineered for ultra finish wood cutting - maintains a sharper cutting edge longer so you get more clean cuts before resharpening is needed\u003c\/li\u003e\n \u003cli\u003e60 ATB (Alternate Top Bevel) tooth geometry - slices wood fibers cleanly on both sides of the kerf, minimizing tearout on plywood faces, melamine surfaces, and veneered panels\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD non-stick coating protects the blade body from heat, gumming, and corrosion - extends working life and keeps the blade cutting freely through resinous or adhesive-coated materials\u003c\/li\u003e\n \u003cli\u003eSuper thin.059\" laser-cut kerf - removes less material per pass, reducing load on the motor and enabling faster, smoother cuts especially on cordless circular saws\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing secures carbide tips to the plate - withstands extreme impact so teeth stay bonded even in demanding professional conditions\u003c\/li\u003e\n \u003cli\u003eHardened steel plate at.040\" thickness - resists warping and flexing under heat and lateral stress, supporting a consistently straight, accurate cut line\u003c\/li\u003e\n \u003cli\u003e10 deg. hook angle - balances aggressive feed with controlled chip removal, making the blade well suited for both crosscutting and rip cuts in wood and wood composites\u003c\/li\u003e\n \u003cli\u003e8000 maximum RPM rating - compatible with standard 7-1\/4\" corded and cordless circular saws operating within normal speed ranges\u003c\/li\u003e\n \u003cli\u003eMade in the United States - consistent quality control and manufacturing standards throughout production\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eA 60-tooth ATB configuration paired with a thin.059\" kerf means you get ultra finish crosscut and rip cut quality from a circular saw - results typically associated with stationary shop equipment, now portable\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD coating and TiCo carbide formulation work together to resist the heat and gumming that commonly dull blades when cutting melamine or veneered plywood, so the blade stays sharp through more demanding finish work\u003c\/li\u003e\n \u003cli\u003eWith a 5\/8\" arbor and 8000 maximum RPM rating, this blade fits most standard 7-1\/4\" corded and cordless circular saws directly - no adapters or modifications required for common tool platforms\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing and a hardened steel plate make this a finish blade that also holds up to the rigors of professional construction environments, not just controlled shop use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProduct Group:\u003c\/strong\u003e Circular Saw Blades\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood Cutting\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub Category:\u003c\/strong\u003e Ultra Finish\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-1\/4\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 60 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 10 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .040\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Ultra Finish crosscuts and rip cuts in wood, plywood \u0026amp; melamine\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0760X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0760A -10:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eUltra Finish Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this Diablo 7-1\/4\" 60-tooth blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for ultra finish crosscuts and rip cuts in wood, plywood, and melamine. The 60 ATB tooth geometry is particularly effective on veneered plywood and melamine-coated panels where chip-free edges are critical.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat circular saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is compatible with both corded circular saws and cordless circular saws that accept a 7-1\/4\" blade with a 5\/8\" arbor. The 8000 maximum RPM rating falls within the operating range of most standard 7-1\/4\" circular saws.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does ATB tooth geometry mean and why does it matter for finish cuts?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eATB stands for Alternate Top Bevel, meaning each successive tooth is ground at an opposing bevel angle. This design slices wood fibers on both sides of the cut simultaneously, which significantly reduces tearout and splintering on delicate surfaces like melamine, veneer, and hardwood face grain - producing a finish that requires little to no sanding.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhy is a thin kerf beneficial when using a cordless circular saw?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eA thin kerf of.059\" removes less material with each pass, which means the saw motor has less resistance to overcome. This translates to less battery drain on cordless circular saws, allowing more cuts per charge while still maintaining smooth, accurate cutting performance.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771538104550,"sku":"D0760X","price":19.57,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":45771538137318,"sku":"D0760A -10","price":181.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/thal8zrwho6rcnacr5sf.png?v=1785951927"},{"product_id":"freud-d12100x-100-tooth-diablo-ultra-fine-circular-saw-blade-for-wood-and-wood-composites-12-inch","title":"Diablo 12\" x 100T Ultimate Polished Finish Saw Blade for Wood D12100X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 12\" x 100-Tooth Wood Demon Ultimate Polished Finish Saw Blade\u003c\/strong\u003e brings professional-grade precision to fine woodworking, delivering polished-like cuts on hardwoods, softwoods, fine molding, veneered plywood, melamine, and more. Engineered with Axial Shear Face Grind (ASFG) technology and Double-Side Grind tooth geometry, this 12-inch circular saw blade produces finishes equal to 220-grit sandpaper or higher - making it an exceptional choice for finish carpenters, cabinetmakers, and trim professionals who demand a surface-ready cut straight off the blade. Built in Italy with Diablo's proprietary TiCo Hi-Density Carbide and a laser-cut ultra-thin kerf, this blade is designed for use on miter saws and slide miter saws, whether at a permanent shop setup or a portable jobsite.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eAxial Shear Face Grind (ASFG) tooth geometry\u003c\/strong\u003e - cleanly shears through material fibers rather than tearing them, producing a superior quality finish on fine molding, hardwoods, softwoods, veneered plywood, and melamine with minimal tearout.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDouble-Side Grind tooth geometry with 200 additional grinds\u003c\/strong\u003e - generates precise, polished-like cuts equal to the finish of 220-grit sandpaper or higher, reducing or eliminating the need for post-cut sanding on finish work.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiCo Hi-Density Carbide tips\u003c\/strong\u003e - specifically formulated for applications requiring polished-like finishes, delivering extreme durability and 5x longer cutting life so professionals spend less time changing blades and more time working.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser-cut ultra-thin.098\" kerf\u003c\/strong\u003e - reduces material waste and lowers amp draw on both corded and cordless saws, helping maximize tool performance and extend battery life on jobsite applications.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e100-tooth ASFG blade design\u003c\/strong\u003e - the high tooth count combined with advanced grind geometry makes this blade ideal for crosscutting hardwood, softwood, and composite sheet goods where surface quality is the priority.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible with miter saws and slide miter saws\u003c\/strong\u003e - the 1\" arbor and 5,000 Maximum RPM rating make it a versatile drop-in upgrade for standard 12-inch miter saw setups in shop and field environments.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eFinish-quality cuts without extra steps\u003c\/strong\u003e - the combination of ASFG tooth geometry and Double-Side Grind technology produces results equal to 220-grit sandpaper or higher directly from the cut, saving significant time on finish trim, molding, and cabinetry projects.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5x longer blade life on polished-finish applications\u003c\/strong\u003e - TiCo Hi-Density Carbide is engineered specifically for demanding finish-cut materials, meaning fewer blade changes and lower long-term tooling costs compared to general-purpose blades.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWorks on corded and cordless saws\u003c\/strong\u003e - the ultra-thin kerf reduces amp draw, making this blade an effective choice for professionals using battery-powered miter saws on portable jobsites where power efficiency matters.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBroad material compatibility in a single blade\u003c\/strong\u003e - from hardwoods and softwoods to veneered plywood, melamine, and fine molding, this blade handles the full range of finish carpentry materials without switching tools or blades mid-project.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub-Brand:\u003c\/strong\u003e Wood Demon\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e D12100X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 12\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 100 ASFG\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .098\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 7 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .071\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 5000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Miter Saw; Slide Miter Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Molding; Melamine; Crosscut Wood; Veneered Plywood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eUltimate Polished Finish Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat makes the ASFG tooth grind different from a standard saw blade grind?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eASFG stands for Axial Shear Face Grind. Unlike conventional tooth geometries that push through material, the ASFG design cleanly shears through wood fibers at an axial angle. This shearing action produces a superior quality finish on hardwoods, softwoods, fine molding, veneered plywood, and melamine - significantly reducing fiber tearout and leaving a surface comparable to 220-grit sandpaper or higher.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eCan this blade be used on a cordless miter saw?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The laser-cut ultra-thin.098\" kerf reduces amp draw during cutting, which is a key advantage when running on battery-powered saws. The reduced resistance means less strain on the tool's motor and battery, making this blade a practical option for cordless slide miter saw setups on portable jobsites as well as corded shop tools.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials is this blade designed to cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for ultimate polished-finish cutting on hardwoods, softwoods, fine molding, melamine, crosscut wood, and veneered plywood. It is intended for use with 12-inch miter saws and slide miter saws with a 1\" arbor, operating at a maximum of 5,000 RPM.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does TiCo Hi-Density Carbide extend the life of this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eDiablo's TiCo Hi-Density Carbide is a proprietary carbide formulation engineered specifically for applications requiring polished-like finishes. It is designed to deliver extreme durability and 5x longer cutting life compared to standard carbide blades used on the same finish-cutting materials, reducing how often the blade needs to be replaced and lowering overall tooling costs over time.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":45771538006246,"sku":"D12100X","price":62.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/a92spi0gdiap0am6mcfo.png?v=1785951929"},{"product_id":"2-pack-freud-d1090x-ultra-fine-90-teeth-circular-saw-blade-for-wood-and-wood-composites-10-inch","title":"Diablo 10\" x 90T Ultimate Polished Finish Saw Blade for Wood D1090X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo Wood Demon 10\" x 90-Tooth Ultimate Polished Finish Saw Blade (D1090X)\u003c\/strong\u003e is engineered for professionals who demand glass-smooth results when cutting fine molding, hardwoods, softwoods, veneered plywood, melamine, and similar materials. Featuring Axial Shear Face Grind (ASFG) technology and Double-Side Grind tooth geometry, this 10-inch circular saw blade delivers polished-like cuts equivalent to the finish of 220-grit sandpaper or higher - making it the right choice for finish carpentry, cabinetry, and trim work where surface quality is non-negotiable. Designed to perform on both corded and cordless tools, this Diablo blade works seamlessly on miter saws, slide miter saws, stationary table saws, and portable table saws alike.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eAxial Shear Face Grind (ASFG) tooth design\u003c\/strong\u003e - cleanly shears through wood fibers rather than tearing them, producing a superior quality finish on hardwoods, softwoods, molding, melamine, and veneered plywood with minimal tearout\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDouble-Side Grind tooth geometry with 200 additional grinds\u003c\/strong\u003e - produces polished-like cuts equal to the finish of 220-grit sandpaper or higher, eliminating the need for sanding on many fine finish applications\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiCo Hi-Density Carbide tips\u003c\/strong\u003e - Diablo's proprietary carbide formulation is specifically engineered for each application, delivering extreme durability and 5X longer cutting life compared to standard carbide blades used on polished-finish materials\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUltra-thin.087\" laser-cut kerf\u003c\/strong\u003e - reduces material waste and amp draw on corded and cordless saws, enabling fast and effortless cuts while helping maximize tool performance across portable jobsite and permanent shop setups\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e90-tooth ASFG configuration on a 10\" diameter blade\u003c\/strong\u003e - high tooth count combined with shear-face geometry means each pass through hardwood, softwood, or veneered panel stock produces a finish-ready surface that reduces downstream labor\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5\/8\" arbor with a.063\" plate\u003c\/strong\u003e - fits standard table saw and miter saw arbors for secure mounting and stable, vibration-reduced cutting performance\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum 6000 RPM rating\u003c\/strong\u003e - compatible with the full range of common miter saw and table saw speeds, supporting safe operation on both stationary and portable power tools\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eWhen finish quality matters on materials like melamine, veneered plywood, or fine molding, this blade's ASFG tooth design and Double-Side Grind geometry eliminate the extra sanding step - the cut surface arrives at 220-grit equivalent quality right off the saw\u003c\/li\u003e\n \u003cli\u003eThe ultra-thin.087\" kerf reduces amp draw, making this blade a strong choice for cordless miter saw users who need polished-finish results without draining battery capacity prematurely\u003c\/li\u003e\n \u003cli\u003eTiCo Hi-Density Carbide delivers 5X longer life on finish-critical applications, meaning fewer blade changes and lower cost per cut on high-volume trim, cabinet, or molding work\u003c\/li\u003e\n \u003cli\u003eWith compatibility across miter saws, slide miter saws, stationary table saws, and portable table saws, this single 10\" blade adapts to a permanent shop setup or a portable jobsite without compromise\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub-Brand:\u003c\/strong\u003e Wood Demon\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e D1090X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood Cutting - Ultimate Polished Finish\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 90 ASFG\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .087\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 10 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .063\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 6000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Miter Saw; Slide Miter Saw; Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Molding; Melamine; Crosscut Wood; Veneered Plywood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eUltimate Polished Finish Wood Cutting - including fine molding, hardwoods, softwoods, veneered plywood, melamine, and crosscut wood where a finish-ready surface is required directly off the saw\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is Axial Shear Face Grind (ASFG) and how does it improve cut quality?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eAxial Shear Face Grind (ASFG) is Diablo's tooth geometry technology that angles the face of each carbide tooth to cleanly shear through wood fibers rather than pushing or tearing through them. This shearing action is what allows the D1090X to produce superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, and melamine - delivering results equivalent to the finish of 220-grit sandpaper or higher directly off the blade.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of saws is the D1090X compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Diablo D1090X 10\" x 90-tooth blade is compatible with miter saws, slide miter saws, stationary table saws, and portable table saws. It uses a standard 5\/8\" arbor and is rated to a maximum of 6000 RPM, covering the operating ranges of most corded and cordless saws in these tool categories.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhy does the ultra-thin kerf matter for cordless saw users?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe.087\" laser-cut ultra-thin kerf removes less material with each pass, which directly reduces the amount of energy the saw motor must exert. This translates to a reduced amp draw on the tool - an important advantage for cordless saw users because it helps extend battery runtime per charge and reduces strain on the motor, allowing more cuts before needing to stop and recharge.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does TiCo Hi-Density Carbide extend blade life on finish wood applications?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eDiablo's proprietary TiCo Hi-Density Carbide is specifically formulated for the demands of polished-finish cutting on materials like hardwoods, softwoods, melamine, and veneered plywood. The result is a carbide tip that holds its edge significantly longer in these applications - delivering 5X longer cutting life compared to standard carbide blades used for the same polished-finish work, which reduces how often the blade needs to be replaced or resharpened.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":37641323020449,"sku":"D1090X","price":61.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/sn6mcfscs8p71obgv32i.png?v=1785951929"},{"product_id":"diabo-by-freud-d1060x-10-x-60-tooth-fine-finish-saw-blade","title":"Diablo 10\" x 60T Fine Finish Saw Blade for Wood D1060X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 10\" x 60-Teeth Fine Finish Saw Blade for Wood\u003c\/strong\u003e is engineered for trim carpenters and woodworking professionals who demand mirror-smooth crosscuts and rip cuts with minimal tearout or blowout. Featuring 60 Hi-ATB (High Alternate Top Bevel) teeth and a precisely ground 15 deg. hook angle, this Diablo blade pairs with miter saws, sliding miter saws, stationary table saws, and portable table saws to deliver finish-quality results in hardwoods, softwoods, plywood, melamine, and MDF. Because the blade leaves surfaces that require little to no sanding, it eliminates time-consuming cleanup and helps trim crews move faster on the jobsite.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide construction - a high-performance carbide formula specifically designed for fine finish wood cutting, producing cleaner edges and longer-lasting sharpness than standard carbide\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD Non-stick Coating - protects the blade from heat buildup, pitch gumming, and corrosion, extending blade life and reducing friction during cuts\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut.098\" kerf - removes less material per pass for faster, cleaner cuts while reducing strain on the saw motor\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing - bonds carbide tips to the plate with maximum holding strength so they withstand extreme impact and resist tip loss during demanding cuts\u003c\/li\u003e\n \u003cli\u003eHardened steel body at.071\" plate thickness - maintains blade flatness and rigidity over repeated use, supporting a sharper, more consistent cutting edge over the life of the blade\u003c\/li\u003e\n \u003cli\u003e60 Hi-ATB teeth with a 15 deg. hook angle - the high tooth count and special cutting geometry work together to minimize \"grabbing\" and produce extremely smooth surfaces on oak, pine, melamine, plywood, and moulding\u003c\/li\u003e\n \u003cli\u003e5\/8\" arbor compatibility - fits standard miter saw and table saw arbors for easy installation across common jobsite and workshop tools\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTrim carpenters working with finish materials like oak, pine, and moulding need cuts that are ready to install - this blade's 60-tooth Hi-ATB geometry leaves surfaces that require little to no sanding, saving real time on every cut.\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD Non-stick Coating addresses one of the most common blade performance killers - heat and pitch accumulation - helping the blade run cooler and cleaner through sticky softwoods and resin-heavy materials.\u003c\/li\u003e\n \u003cli\u003eWith a maximum rating of 6000 RPM and compatibility with sliding miter saws, stationary table saws, and portable table saws, this blade is versatile enough to move between the shop and the jobsite without needing a blade swap.\u003c\/li\u003e\n \u003cli\u003eThe super thin.098\" laser cut kerf reduces material waste and cutting resistance, which is especially valuable when making repeated finish cuts in hardwoods like oak where blade drag and tearout are common problems.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e D1060X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 60 Hi-ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .098\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .071\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 6000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Miter Saw; Slide Miter Saw; Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Plywood; Melamine; MDF\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e High quality crosscuts and rip cuts in wood, plywood \u0026amp; melamine\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFine Finish Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of saws is the Diablo D1060X compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe D1060X is compatible with miter saws, sliding (\"chop\" style) miter saws, stationary table saws, and portable table saws. It fits any of these tools that use a standard 5\/8\" arbor and operate at or below the maximum rated speed of 6000 RPM.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this blade cut cleanly?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for high-quality crosscuts and rip cuts in hardwoods, softwoods, plywood, melamine, and MDF. It is specifically well-suited for finish cutting in oak, pine, moulding, and plywood where surface quality matters.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWill I need to sand after cutting with this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eIn most cases, no. The special cutting geometry and 60-tooth Hi-ATB configuration are designed to leave a smooth surface that requires little to no sanding, making this blade especially practical for trim carpenters working with finish materials.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the Perma-SHIELD Non-stick Coating do for blade performance?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Perma-SHIELD Non-stick Coating protects the blade from heat buildup, pitch gumming, and corrosion. This helps the blade run cleaner through resin-heavy or sticky woods, reduces friction during cuts, and contributes to a longer service life compared to uncoated blades.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":45771537514726,"sku":"D1060X","price":42.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/hkzaquf4ohmwxwbpfvk5.png?v=1785951928"},{"product_id":"10-count-avanti-a0724a-7-1-4-inch-24-teeth-saw-blade","title":"Avanti 7-1\/4\" x 24-Tooth Framing Circular Saw Blade A0724A 10Pk","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eAvanti 7-1\/4 in. x 24-Tooth Framing Circular Saw Blade\u003c\/strong\u003e is an economical, high-performance cutting solution engineered for general construction applications including wood framing, roofing, remodeling, and concrete form work. Built from high-quality steel with carbide reinforcement, this 7-1\/4 in. circular saw blade delivers durability that outlasts standard steel blades - making it a reliable choice for framers, roofers, remodelers, and concrete formers tackling demanding jobsite conditions. This listing includes a convenient 10-pack, giving crews consistent cutting performance across extended projects without frequent restocking.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e7-1\/4 in. blade diameter with 24 teeth\u003c\/strong\u003e - sized to fit standard circular saws and optimized for aggressive, fast framing cuts through softwood, pressure-treated beams, and OSB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHigh-quality steel with carbide reinforcement\u003c\/strong\u003e - lasts longer than regular steel blades, reducing the frequency of blade changes on busy jobsites\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSharpenable design\u003c\/strong\u003e - the blade can be resharpened when it dulls, extending its service life and delivering added long-term value over disposable alternatives\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEconomical yet high-performance construction\u003c\/strong\u003e - suited for both DIY projects and professional construction use, balancing cost-effectiveness with reliable cutting results\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e10-pack quantity\u003c\/strong\u003e - ensures a ready supply of replacement blades for continuous workflow on framing, roofing, and remodeling tasks\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFramers, roofers, and remodelers who cut large volumes of softwood, pressure-treated lumber, and OSB benefit from a carbide-reinforced blade that holds its edge longer than standard steel - fewer stops to swap blades means more time working\u003c\/li\u003e\n \u003cli\u003eThe sharpenable construction means this blade does not have to be discarded at the first sign of dulling - restoring a sharp edge extends usable life and lowers the overall cost per cut over the course of a project\u003c\/li\u003e\n \u003cli\u003eBuying in a 10-pack keeps replacement blades on hand without repeat ordering, making it practical for crews running multiple circular saws simultaneously on construction sites\u003c\/li\u003e\n \u003cli\u003eRated for softwood, pressure-treated beams, and oriented-strand board (OSB), this blade covers the most common framing and rough-carpentry materials in a single SKU\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Avanti\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e A0724A\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBlade Size:\u003c\/strong\u003e 7-1\/4 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth:\u003c\/strong\u003e 24\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 10\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Cutting Wood Framing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e General construction applications, framers, roofers, remodelers, and concrete formers\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eSoftwood cutting for framing and rough carpentry\u003c\/li\u003e\n \u003cli\u003ePressure-treated beams and lumber\u003c\/li\u003e\n \u003cli\u003eOriented-strand board (OSB)\u003c\/li\u003e\n \u003cli\u003eGeneral construction framing\u003c\/li\u003e\n \u003cli\u003eRoofing and remodeling cuts\u003c\/li\u003e\n \u003cli\u003eConcrete form work\u003c\/li\u003e\n \u003cli\u003eDIY projects requiring reliable circular saw performance\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials is this 7-1\/4 in. circular saw blade designed to cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Avanti framing blade is designed for cutting softwood, pressure-treated beams, and oriented-strand board (OSB) - the materials most commonly encountered in framing, roofing, remodeling, and concrete form work.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eCan this blade be sharpened, or does it need to be replaced when it dulls?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes - one of the key advantages of this blade is that it can be resharpened when needed, which extends its service life beyond a single use cycle. This makes the 10-pack an even more cost-effective investment for ongoing construction work.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhy does the carbide reinforcement matter compared to a regular steel blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe high-quality steel with carbide reinforcement gives this blade greater toughness and durability than regular steel blades. In practical terms, it holds a cutting edge longer under the friction and stress of framing cuts, reducing how often you need to change blades during a job.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eIs this blade suitable for professional construction use, or is it intended only for DIY projects?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Avanti circular saw blade is designed for both DIY projects and professional construction applications. It is specifically recommended for framers, roofers, remodelers, and concrete formers working in general construction environments.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35333101944993,"sku":"A0724A -10","price":56.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/51FBjEprK8L.jpg?v=1785951925"},{"product_id":"diablo-6-1-2-x-40-tooth-atb-precision-finishing-saw-blade-2-pack","title":"Diablo 6-1\/2\" x 40T Finish Trim Saw Blade D0641","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 6-1\/2\" x 40-Tooth Finish Trim Saw Blade\u003c\/strong\u003e is a premium wood cutting blade engineered for smooth, clean crosscuts in hardwood, softwood, and plywood. Crafted in Italy and built around Diablo's TiCo Hi-Density Carbide technology, this 6-1\/2\" circular saw blade delivers the refined edge quality that finish carpenters and trim installers demand - without sacrificing cutting speed or blade longevity. Whether you're making precision cuts in laminate, melamine, pressure treated lumber, or OSB, this 40-tooth ATB blade brings professional-grade finish cutting performance to both corded and cordless circular saws.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiCo Hi-Density Carbide teeth (40 ATB)\u003c\/strong\u003e - carbide is specifically formulated for finish cutting applications, delivering maximum sharpness retention and longer cutting life across hardwoods, softwoods, laminate, and plywood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSuper thin.059\" laser-cut kerf\u003c\/strong\u003e - removes less material per pass, resulting in faster, cleaner cuts with less strain on cordless circular saws and trim saws\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser-cut stabilizer vents\u003c\/strong\u003e - trap noise and vibration during cutting, keeping the blade cooler and reducing the risk of blade warp during extended use\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNon-stick Perma-Shield Coating\u003c\/strong\u003e - protects the blade plate from gumming, rusting, and corrosion, extending overall service life and keeping cuts smooth even in resinous or treated lumber\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e15 deg. hook angle\u003c\/strong\u003e - optimized geometry for smooth, controlled finish crosscuts that minimize tearout in hardwoods, plywood, and melamine\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUltra-thin.039\" plate with laser-cut precision\u003c\/strong\u003e - ensures true, accurate cuts with minimal deviation, critical for trim and finish carpentry work\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5\/8\" arbor with diamond knockout\u003c\/strong\u003e - compatible with a wide range of 6-1\/2\" trim saws, corded circular saws, and cordless circular saws for maximum tool versatility\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e10,000 Maximum RPM rating\u003c\/strong\u003e - engineered to perform safely at the speeds typical of compact trim and circular saws used on the jobsite\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDesigned specifically for finish cutting - the 40-tooth ATB configuration and 15 deg. hook angle work together to produce smoother edges than standard framing blades, making this blade the right choice when cut quality matters on visible trim, fascia, decking, and plywood panels\u003c\/li\u003e\n \u003cli\u003eBuilt for versatility across tough materials - rated for hardwoods, 2X lumber, laminate, melamine, plywood, OSB, and pressure treated wood, this blade handles the full range of materials encountered in finish carpentry and renovation work\u003c\/li\u003e\n \u003cli\u003eThin kerf design reduces battery and motor demand - the.059\" kerf means less resistance per cut, which translates directly into more cuts per battery charge when used with cordless circular saws on the jobsite\u003c\/li\u003e\n \u003cli\u003eLaser-cut stabilizer vents and Perma-Shield Coating address two of the most common blade failure points - heat-related warp and corrosion - helping maintain cut quality and extend the usable life of the blade in real-world jobsite conditions\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProduct Group:\u003c\/strong\u003e Circular Saw Blades\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood Cutting\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub Category:\u003c\/strong\u003e Finish\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6-1\/2\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 40 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .039\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 10000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Trim Saw; Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; 2X Lumber; Laminate; Melamine; Plywood; OSB; Pressure Treated\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Smooth finish crosscuts in hardwood, softwood, or plywood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0641X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0641A -10:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFinish Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of saws is this 6-1\/2\" blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is compatible with trim saws, corded circular saws, and cordless circular saws equipped with a 5\/8\" arbor. The blade is rated to a maximum of 10,000 RPM, which aligns with the operating speeds of most compact 6-1\/2\" saws in these categories.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed to cut hardwoods, 2X lumber, laminate, melamine, plywood, OSB, and pressure treated wood. It is specifically optimized for smooth finish crosscuts in hardwood, softwood, and plywood where cut quality is a priority.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhy does the thin kerf matter for cordless circular saw users?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe.059\" laser-cut kerf removes less material per pass compared to thicker standard kerfs. This reduces the cutting resistance the motor must overcome, which means less battery drain per cut - an important advantage when working with cordless circular saws on jobsites where runtime matters.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the 40-tooth ATB configuration differ from a framing blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe 40-tooth Alternate Top Bevel (ATB) tooth geometry is designed to shear wood fibers cleanly, producing smoother edges suitable for finish carpentry applications such as trim, fascia, decking, fencing, and plywood panels. Framing blades typically use fewer teeth optimized for speed rather than surface finish quality.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771537285350,"sku":"D0641X","price":17.97,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":45771537318118,"sku":"D0641A -10","price":159.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/tpnr6aq6ebu8ibyjq0fq.png?v=1785951927"},{"product_id":"avanti-10-in-x-40-teeth-general-purpose-saw-blade","title":"Avanti 10\" x 40-Tooth General Purpose Circular Saw Blade A1040X","description":"\u003cdiv\u003e\n\u003cp\u003eThe \u003cstrong\u003eAvanti 10 in. x 40-Tooth General Purpose Circular Saw Blade (A1040X)\u003c\/strong\u003e by Avanti delivers economical, high-performance cutting for a wide range of wood and construction materials. Designed to fit 10 in. miter saws and table saws, this carbide-tipped blade combines high-quality steel construction with carbide reinforcement to outlast standard steel blades - making it a dependable choice for DIY projects, jobsite carpentry, and general construction work alike.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 10 in. miter saws and table saws - fits the most common saw platforms used in both DIY and professional construction settings, so you can get cutting right away without adapter concerns\u003c\/li\u003e\n\u003cli\u003eCarbide-tipped blade construction - carbide reinforcement significantly extends blade life compared to regular steel blades, reducing the frequency and cost of replacements\u003c\/li\u003e\n\u003cli\u003e40-tooth general purpose configuration - provides a balanced cut suitable for a broad range of wood types and construction lumber, making this one blade work across many applications\u003c\/li\u003e\n\u003cli\u003eRecommended for all woods and pressure-treated wood construction materials - handles standard dimensional lumber as well as chemically treated beams and boards without requiring a specialty blade\u003c\/li\u003e\n\u003cli\u003eHigh-quality steel with carbide reinforcement for toughness and durability - the steel core resists flexing and warping during demanding cuts, while carbide tips maintain edge sharpness through extended use\u003c\/li\u003e\n\u003cli\u003eCan be sharpened to extend service life - rather than discarding the blade when teeth dull, resharpening is possible, delivering additional value and lower long-term cost per cut\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy This Product\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne blade for many materials - the 40-tooth general purpose design covers everything from framing lumber to pressure-treated beams, eliminating the need to swap blades when switching between common wood types on a construction site or home workshop\u003c\/li\u003e\n\u003cli\u003eLower total cost of ownership - the ability to sharpen this carbide-tipped blade when edges dull means you extend its useful life beyond a single cutting cycle, making it a cost-effective replacement blade for everyday use\u003c\/li\u003e\n\u003cli\u003eBuilt for the saw you already own - drop-in compatibility with standard 10 in. miter saws and table saws means no special adapters or tooling changes are required\u003c\/li\u003e\n\u003cli\u003eDurable enough for construction-grade materials - the carbide-reinforced, high-quality steel construction stands up to the demands of cutting pressure-treated wood, which can be harder on blades than untreated lumber\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Avanti\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e A1040X\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Diameter:\u003c\/strong\u003e 10 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Teeth:\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Type:\u003c\/strong\u003e General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Saw Types:\u003c\/strong\u003e 10 in. miter saws and table saws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlade Material:\u003c\/strong\u003e High-quality steel with carbide reinforcement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material:\u003c\/strong\u003e Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Materials:\u003c\/strong\u003e All woods and pressure-treated wood construction materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSharpenable:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat types of saws is the Avanti A1040X compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis blade is compatible with 10 in. miter saws and table saws, fitting the most widely used saw formats in both home workshops and professional construction environments.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this blade be used to cut pressure-treated lumber?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The Avanti A1040X is specifically recommended for all woods and pressure-treated wood construction materials, making it a practical choice for framing and outdoor construction projects that use chemically treated beams and boards.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan the blade be sharpened when the teeth become dull?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The carbide-tipped blade can be sharpened to extend its service life, which helps reduce replacement costs over time compared to blades that must be discarded once dull.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhy does carbide reinforcement matter on a circular saw blade?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eCarbide is a harder material than standard steel, so carbide-tipped teeth hold a sharp cutting edge longer under demanding conditions. Combined with the high-quality steel body, the A1040X offers greater toughness and durability than regular steel blades, meaning fewer interruptions for blade changes during a project.\u003c\/dd\u003e\n\u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35333635244193,"sku":"A1040X","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/51CUxxVJn0L.jpg?v=1785951925"},{"product_id":"avanti-7-1-4-in-x-140-tooth-osb-plywood-circular-saw-blade","title":"Avanti 7-1\/4\" x 140-Tooth OSB\/Plywood Circular Saw Blade A07140A","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eAvanti 7-1\/4 in. x 140-Tooth OSB\/Plywood Circular Saw Blade\u003c\/strong\u003e by Avanti is engineered for woodworkers, contractors, and DIY enthusiasts who demand clean, splinter-free cuts in plywood, oriented-strand board (OSB), plastics, and veneer. With an exceptionally high 140-tooth count, this finish-quality circular saw blade minimizes tear-out and delivers smooth edges that reduce or eliminate the need for sanding or secondary trimming. Designed to fit any standard 7-1\/4 in. corded or cordless circular saw, it brings professional-grade cutting performance to everyday construction tasks and weekend home improvement projects alike.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e140-tooth high tooth count\u003c\/strong\u003e - produces exceptionally clean, smooth cuts in plywood, OSB, plastics, and veneer, reducing tear-out and finishing time on construction or DIY projects\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUniversal 7-1\/4 in. blade size\u003c\/strong\u003e - compatible with any 7-1\/4 in. corded or cordless circular saw, making this blade a versatile fit for tools you already own\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHigh-quality steel construction\u003c\/strong\u003e - delivers dependable, straight cuts through engineered sheet goods and plastics for consistent results on every pass\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum 7,500 RPM rating\u003c\/strong\u003e - sets a clear safe operating limit so users can match the blade to their saw's speed settings and work confidently within safe parameters\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEconomical yet high-performance design\u003c\/strong\u003e - offers a cost-effective upgrade path for both occasional DIY users and everyday construction professionals without sacrificing cut quality\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eWhen cutting plywood or OSB sheets, a higher tooth count is essential to preventing splintering along the cut edge - this 140-tooth blade addresses that need directly, making it one of the most practical choices for finish-quality sheet material cuts\u003c\/li\u003e\n \u003cli\u003eBecause it fits any standard 7-1\/4 in. corded or cordless circular saw, there is no need to invest in a specialized tool - just swap the blade and immediately improve your cut quality on plastics, veneer, and engineered wood panels\u003c\/li\u003e\n \u003cli\u003eThe combination of high-quality steel and a 140-tooth configuration makes this blade suitable for both heavy-duty construction site use and occasional home improvement work, giving it a broad range of practical applications\u003c\/li\u003e\n \u003cli\u003eAt an affordable price point, this blade delivers clean results that would otherwise require more expensive finishing steps, making it a smart, budget-conscious choice for anyone cutting sheet goods regularly\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Avanti\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e A07140A\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBlade Diameter:\u003c\/strong\u003e 7-1\/4 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTooth Count:\u003c\/strong\u003e 140\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 7,500\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Saw Type:\u003c\/strong\u003e 7-1\/4 in. corded or cordless circular saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRecommended Applications:\u003c\/strong\u003e Plywood, OSB, plastics, veneer\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRecommended Use:\u003c\/strong\u003e Occasional DIY projects and everyday construction use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can the Avanti A07140A circular saw blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is ideal for cutting plywood, oriented-strand board (OSB), plastics, and veneer. Its 140-tooth count is specifically suited to these materials because the high tooth count minimizes splintering and produces clean, smooth edges.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWill this blade fit my cordless circular saw?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The Avanti A07140A is compatible with any 7-1\/4 in. corded or cordless circular saw, so it works with most standard circular saws available today without requiring any adapters.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the maximum safe operating speed for this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is not intended for use above 7,500 RPM. Always verify that your circular saw's speed does not exceed this limit before installing and operating the blade to ensure safe use.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eIs this blade appropriate for both professional construction use and home DIY projects?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The Avanti A07140A is recommended for both occasional DIY projects around the house and everyday construction use on a job site. Its economical price point combined with high-performance cutting capability makes it a practical choice for a wide range of users.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35333635375265,"sku":"A07140A","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/51WAT99nLSL.jpg?v=1785951925"},{"product_id":"freud-d0436x-diablo-4-3-8-inch-36-tooth-atb-saw-blade-20-millimeter-arbor-3-8-inch-reducer-bushing-2-pack","title":"Diablo 4-1\/2\" 36T Fine Finish Saw Blade D0436X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 4-1\/2 in. 36-Tooth Fine Finish Saw Blade\u003c\/strong\u003e is engineered for smooth, clean crosscuts in hardwood, softwood, and plywood - making it an ideal choice for jobsite finish work including decking, fencing, fascia, and 1X lumber. Diablo combines application-specific TiCo Hi-Density carbide teeth with a super thin-kerf design to deliver precise cuts, reduced heat buildup, and extended blade life when using a trim saw or portable circular saw. Made in Italy, this fine finish blade performs consistently on both corded and cordless 4-1\/2 in. saws with a 3\/8 in. arbor, giving tradespeople and woodworkers a reliable tool for high-quality rips and crosscuts on the job.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiablo TiCo Carbide teeth\u003c\/strong\u003e - specially formulated to withstand impact, reduce wear, and last longer in fine finish cutting applications, so you replace blades less often and maintain cut quality throughout the blade's life\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD non-stick coating\u003c\/strong\u003e - protects the blade against heat, gumming, and corrosion, keeping the blade running smoothly through resinous woods and pressure-treated lumber without drag or residue buildup\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAdvanced Laser Cut Stabilizer Vents\u003c\/strong\u003e - traps noise and vibration for maximum stability, keeping the blade cool with accurate cuts in wood, resulting in cleaner edges and reduced operator fatigue\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSuper Thin Kerf Design at.049 in.\u003c\/strong\u003e - provides less resistance and heat buildup for ease of cut, accuracy, and longer cutting life, which is especially valuable when working with cordless saws where battery runtime matters\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTri-Metal Shock-Resistant Brazing\u003c\/strong\u003e - provides a high-performance shock absorber behind every tooth, protecting carbide tips from chipping when cutting through knots or dense grain\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser Cut Arbor\u003c\/strong\u003e - reduces vibration and premature wear for accurate blade rotation on cordless and corded saws, ensuring consistent, repeatable cuts throughout the blade's service life\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e36 ATB tooth configuration with a 5 deg. hook angle\u003c\/strong\u003e - optimized for smooth finish crosscuts across hardwoods, softwoods, laminate, plywood, OSB, and pressure-treated material\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFine finish crosscuts in demanding materials - this blade is designed specifically for smooth results in hardwood, softwood, plywood, laminate, and pressure-treated lumber, eliminating the need for secondary sanding or cleanup on visible finish surfaces like fascia and decking\u003c\/li\u003e\n \u003cli\u003eCompatible with both corded and cordless trim saws - the super thin kerf and laser-cut arbor are optimized for 4-1\/2 in. saws with a 3\/8 in. arbor, making this blade a versatile fit for most compact circular saws used on the jobsite\u003c\/li\u003e\n \u003cli\u003eBuilt to last with TiCo carbide and Perma-SHIELD protection - the combination of impact-resistant carbide and a non-stick corrosion-resistant coating means the blade holds up in tough site conditions and delivers consistent performance cut after cut\u003c\/li\u003e\n \u003cli\u003eRated up to 5000 RPM - the maximum RPM rating ensures safe, stable operation at full speed on trim saws, so you can work confidently without worrying about blade performance under load\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 4-1\/2 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 36 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 3\/8 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .049 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 5 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .039 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 5000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Trim Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Laminate; Pressure Treated; Plywood; OSB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0436X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0436X -8P:\u003c\/strong\u003e 8 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eWood Cutting - smooth finish crosscuts in hardwood, softwood, plywood, OSB, laminate, and pressure-treated lumber for decking, fencing, fascia, and 1X finish work\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of wood and materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is compatible with hardwoods, softwoods, laminate, pressure-treated lumber, plywood, and OSB. It is designed specifically for smooth finish crosscuts and high-quality rips in these materials, making it well-suited for decking, fencing, fascia, and general 1X finish work.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat size saw is this blade designed for?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is optimized for corded and cordless 4-1\/2 in. saws with a 3\/8 in. arbor, such as a trim saw. It has a maximum RPM rating of 5000 and should only be used on saws that meet those specifications.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the thin kerf design mean for cutting performance?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe super thin kerf of.049 in. means the blade removes less material with each pass, which reduces resistance and heat buildup during the cut. This results in easier cutting, greater accuracy, and longer overall blade life - particularly beneficial when using cordless saws where motor load directly affects battery runtime.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the hook angle on this blade and why does it matter?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade features a 5 deg. hook angle, which is a relatively low positive hook designed for controlled, smooth finish cuts rather than aggressive ripping. A lower hook angle reduces the tendency of the blade to grab the material, producing cleaner edges on visible surfaces like fascia and trim boards.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771536826598,"sku":"D0436X","price":21.57,"currency_code":"USD","in_stock":true},{"title":"8 Pk","offer_id":45771536859366,"sku":"D0436X -8P","price":143.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/qnoebgo5wzostjwtb4to.png?v=1785951926"},{"product_id":"wd-mtl-bld-6-1-232t-bk","title":"Diablo 6-1\/2\" x 32T Carbide Saw Blade for Wood \u0026 Metal D0632GPA","description":"\u003cp\u003eThe \u003cstrong\u003eDiablo 6-1\/2\" x 32-Teeth Carbide Saw Blade for Wood and Metal\u003c\/strong\u003e is a multi-purpose circular saw blade engineered to handle both clean wood, wood with nails, and metal cutting applications with a single blade - eliminating the need to swap blades mid-job. Designed for use with corded and cordless circular saws, this Diablo blade features TiCo Hi-Density carbide tips and a Chamfered-Alternate Top Bevel (C-ATB) tooth design that delivers clean, burr-free results across a wide range of materials, from 2X lumber and OSB to steel studs, angle iron, and threaded rod.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-performance TiCo Hi-Density carbide tips\u003c\/strong\u003e - withstand impact and reduce wear in both wood and metal cutting, meaning longer blade life and fewer replacements on demanding jobsites\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChamfered-Alternate Top Bevel (C-ATB) tooth design\u003c\/strong\u003e - cleanly shears through wood while delivering clean, burr-free cuts in metal, so one blade handles tasks that previously required two\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTri-Metal Shock Resistant Brazing\u003c\/strong\u003e - allows carbide tips to withstand extreme impact, providing maximum durability when cutting nail-embedded wood or hard metal profiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD non-stick aluminum coating\u003c\/strong\u003e - protects the blade against heat, gumming, and corrosion, extending blade life and keeping cuts smooth over extended use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Laser Cut Stabilizer Vents\u003c\/strong\u003e - trap noise and vibration for maximum stability, keeping the blade cool and cuts accurate in both wood and metal applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Cut Thin Kerf Design (.059\" kerf)\u003c\/strong\u003e - reduces resistance and heat build-up for easier cutting, greater accuracy, and a longer cutting life in wood and metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaser Cut Arbor (5\/8\" arbor size)\u003c\/strong\u003e - reduces vibration and premature wear for accurate blade rotation on both corded and cordless saws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts up to 2\" material thickness in wood applications\u003c\/strong\u003e - handles full-dimension 2X lumber and demolition work including wood with embedded nails without changing blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts 3\/32\"-1\/4\" wall thickness in steel studs, channel, angle iron, pipe, tubing, plate, and bar stock\u003c\/strong\u003e - makes this blade a practical solution for metal framing and structural cutting tasks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts 1\/4\"-1\" diameter threaded rod\u003c\/strong\u003e - adds versatility for mechanical, electrical, and construction trades that regularly size and cut fastener rod in the field\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy This Product\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne blade replaces two\u003c\/strong\u003e - the C-ATB tooth geometry and TiCo carbide construction allow this 6-1\/2\" blade to transition between wood, nail-embedded demolition lumber, and metal cutting, reducing downtime spent changing blades and saving money on tooling costs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for real demolition and construction conditions\u003c\/strong\u003e - Tri-Metal Shock Resistant Brazing and TiCo Hi-Density carbide make this blade impact-resistant enough to rip through wood with nails while still producing clean, burr-free cuts in angle iron, steel studs, and threaded rod\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with corded and cordless circular saws\u003c\/strong\u003e - the 5\/8\" arbor, 10,000 maximum RPM rating, and thin kerf design are optimized for the output characteristics of both corded and battery-powered circular saws, making this blade adaptable across a full tool inventory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered to cut a wide range of metal profiles\u003c\/strong\u003e - from 3\/32\"-1\/4\" wall steel studs and angle iron to 1\/4\"-1\" diameter threaded rod, this blade covers the metal cutting needs of framing, mechanical, and general construction work without requiring a dedicated metal cutting saw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e D0632GPA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Group:\u003c\/strong\u003e Circular Saw Blades\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood and Metal Cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6-1\/2\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 32 C-ATB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .051\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 5 deg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 10,000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e 2X Lumber; OSB; Demolition; Steel Studs; Angle Iron; Threaded Rod\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0632GPA:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0632GPA -5\u003c\/strong\u003e: 5 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApproved Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-Purpose Material cutting - including clean wood, wood with nails, steel studs, angle iron, channel, flat bar, threaded rod, and demolition lumber\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cdl\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat metals can this Diablo blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThis blade cuts metal with a wall thickness of 3\/32\"-1\/4\", including steel studs, channel, angle iron, pipe, tubing, plate, and bar stock. It also cuts threaded rod from 1\/4\"-1\" in diameter. It is not rated for metal outside these thickness and diameter ranges.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eCan this blade cut wood with nails embedded in it?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The TiCo Hi-Density carbide tips and Tri-Metal Shock Resistant Brazing are specifically designed to withstand the impact of cutting through nail-embedded wood and demolition lumber up to 2\" in material thickness.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eIs this blade compatible with cordless circular saws?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eYes. The Diablo D0632GPA is optimized for both corded and cordless circular saws. The thin kerf design (.059\") reduces resistance and heat build-up, which is especially beneficial for battery-powered saws where preserving runtime and motor load matters.\u003c\/dd\u003e\n\u003cdt\u003e\u003cstrong\u003eWhat is the hook angle on this blade, and why does it matter?\u003c\/strong\u003e\u003c\/dt\u003e\n\u003cdd\u003eThe hook angle is 5 deg. A moderate positive hook angle like this balances aggressive feed in wood with the controlled cut needed for metal applications, helping to prevent blade grab and producing safer, cleaner cuts across both material types.\u003c\/dd\u003e\n\u003c\/dl\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771536761062,"sku":"D0632GPA","price":24.27,"currency_code":"USD","in_stock":true},{"title":"5 Pk","offer_id":45771536793830,"sku":"D0632GPA -5","price":101.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/D0632GPA_Main-Image20191001.png?v=1785951927"},{"product_id":"freud-d0536x-diablo-5-3-8-inch-36-tooth-atb-finish-cordless-trim-saw-blade-2-pack","title":"Diablo 5-3\/8\" x 36T Finish Trim Saw Blade for Wood D0536X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 5-3\/8\" x 36-Teeth Finish Trim Saw Blade for Wood\u003c\/strong\u003e is engineered for portable and low-powered trim saws, delivering smooth, professional-quality finish crosscuts in hardwoods, softwoods, and plywood. Diablo has developed this compact trim saw blade specifically to extend run time on DeWalt and similar trim saws, making it a reliable choice for jobsite carpenters who demand clean results from lightweight cutting tools. With a thin kerf, precision-ground carbide teeth, and a protective coating that guards against corrosion, this blade keeps portable circular saws cutting efficiently through a wide range of wood materials - from standard 2x lumber to pressure treated boards.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide teeth specifically designed for each application - maximizes cutting life so the blade stays sharp longer through hardwoods, softwoods, and plywood\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf at.049\" - reduces material waste and cutting resistance, resulting in extremely fast, durable, and clean cuts with less strain on low-powered trim saws\u003c\/li\u003e\n \u003cli\u003eLaser-cut stabilizer vents trap noise and vibration - keep the blade running cool during extended use and reduce blade warp for consistently accurate cuts\u003c\/li\u003e\n \u003cli\u003eNon-stick Perma-SHIELD Coating - resists gumming from resinous woods and protects against rusting and corrosion for a longer service life on the jobsite\u003c\/li\u003e\n \u003cli\u003eLaser-cut arbor ensures accurate blade rotation - minimizes vibration and premature wear so the blade tracks true cut after cut\u003c\/li\u003e\n \u003cli\u003e36 ATB (Alternate Top Bevel) tooth configuration - engineered for smooth finish crosscuts, leaving clean edges in hardwood, softwood, and plywood without splintering\u003c\/li\u003e\n \u003cli\u003eMaximum 12,000 RPM rating - safely handles the high-speed demands of portable trim saws\u003c\/li\u003e\n \u003cli\u003e2 deg. hook angle - optimized for controlled feeding and clean finish cuts in wood materials\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eProven to extend run time on DeWalt and similar trim saws - this blade is purpose-built for portable, low-powered saws that need an efficient, thin-kerf blade to maintain cutting performance through an entire workday\u003c\/li\u003e\n \u003cli\u003eHandles the full range of jobsite wood materials - rated for hardwoods, softwoods, 2x lumber, pressure treated lumber, and plywood, so one blade covers the variety of cuts a finish trim carpenter encounters on a typical project\u003c\/li\u003e\n \u003cli\u003eThe.039\" plate and.049\" thin kerf reduce drag and heat buildup - critical advantages when running a compact trim saw where motor power is limited and blade cooling matters\u003c\/li\u003e\n \u003cli\u003eMade in Italy with TiCo Hi-Density carbide and a Perma-SHIELD protective coating - this combination of premium carbide formulation and corrosion-resistant coating addresses two common causes of premature blade failure: dulling and environmental degradation\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5-3\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 36 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 10mm\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .049\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 2 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .039\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 12000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Trim Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; 2X Lumber; Pressure Treated; Plywood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Smooth finish crosscuts in hardwood, softwood, or plywood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0536X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0536X -8:\u003c\/strong\u003e 8 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eWood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat type of trim saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Diablo 5-3\/8\" blade is designed for trim saws, and is proven to extend run time on DeWalt and similar trim saws. The 10mm arbor and 5-3\/8\" diameter are matched to portable, low-powered jobsite trim saws in this size class.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat wood materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is rated for hardwoods, softwoods, 2x lumber, pressure treated lumber, and plywood. Its 36 ATB tooth configuration is specifically suited for smooth finish crosscuts across all of these materials.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the maximum RPM for this blade, and why does it matter?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe blade is rated for a maximum of 12,000 RPM. Never operate the blade above this rated speed, as exceeding the maximum RPM can compromise both blade integrity and operator safety. Always verify that your trim saw's speed does not exceed this limit before use.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat makes the kerf design on this blade beneficial for trim work?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe super thin laser cut kerf measures.049\", which reduces cutting resistance and material waste. For portable and low-powered trim saws, a thinner kerf means less load on the motor, helping extend run time and producing cleaner, faster cuts in finish trim applications.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771536695526,"sku":"D0536X","price":20.06,"currency_code":"USD","in_stock":true},{"title":"8 Pk","offer_id":45771536728294,"sku":"D0536X -8","price":149.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/fajvxp1crxnscsoxpad5.png?v=1785951927"},{"product_id":"freud-d0624a-6-1-2-in-x-24-tooth-tracking-point-wood-framing-saw-blade-carbide","title":"Diablo 6-1\/2\" x 24T Framing Saw Blade for Wood D0624","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 6-1\/2 in. 24-Tooth Framing Saw Blade for Wood\u003c\/strong\u003e is engineered for general construction applications, delivering fast and efficient ripping and crosscutting through the toughest jobsite materials. Designed by Diablo and made in Italy, this circular saw blade pairs a thin laser-cut kerf with a 24-tooth Alternate Top Bevel geometry to maximize cutting speed and control - whether you are framing walls, cutting pressure treated lumber, or ripping through OSB and laminated beams. Compatible with trim saws, corded circular saws, and cordless circular saws alike, this blade is a reliable choice for framers, roofers, and remodelers who demand consistent performance across a wide range of wood materials.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e24 ATB Tooth Geometry\u003c\/strong\u003e - the Alternate Top Bevel configuration provides clean tracking and positive cutting control through both hardwoods and softwoods, reducing tear-out and wandering during rip cuts and crosscuts\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e18 deg. Hook Angle\u003c\/strong\u003e - an aggressive hook angle drives the blade aggressively into the material, enabling faster feed rates for high-volume framing and rough carpentry work\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e.059 in. Kerf Width\u003c\/strong\u003e - a super-thin kerf removes less material per cut, reducing waste and strain on the motor - especially valuable when running a cordless circular saw where battery efficiency matters\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e.039 in. Plate Thickness\u003c\/strong\u003e - a slim plate reduces friction and heat buildup during extended cutting sessions, helping the blade run cooler and last longer\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5\/8 in. Arbor Fit\u003c\/strong\u003e - the standard 5\/8 in. arbor size ensures compatibility with a broad range of trim saws, corded circular saws, and cordless circular saws without the need for adapters\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e8800 Maximum RPM Rating\u003c\/strong\u003e - rated for up to 8800 RPM, this blade can safely handle the full speed range of most 6-1\/2 in. circular saws, maintaining stability and cut quality at high operating speeds\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide Material Compatibility\u003c\/strong\u003e - cuts 2X lumber, softwoods, hardwoods, pressure treated wood, OSB, laminated beams, and rip wood, making it a single versatile blade for multiple framing and construction tasks\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eThe 18 deg. hook angle combined with 24 ATB teeth makes this blade purpose-built for fast framing cuts - ideal for production framing where speed and accuracy through 2X lumber and pressure treated stock are critical\u003c\/li\u003e\n \u003cli\u003eAt.059 in. kerf, the thin-kerf design reduces the load on cordless circular saws, meaning less battery drain per cut and more cuts per charge during jobsite use\u003c\/li\u003e\n \u003cli\u003eThe 6-1\/2 in. diameter and 5\/8 in. arbor fit gives this blade broad compatibility across compact trim saws and full-size circular saws, so one blade works across multiple tools on the same jobsite\u003c\/li\u003e\n \u003cli\u003eDiablo's blade handles the full spectrum of common framing materials - from OSB sheathing and laminated beams to hardwoods and pressure treated lumber - reducing the need to swap blades mid-task\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6-1\/2 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 24 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 18 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .039 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8800\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Trim Saw; Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e 2X Lumber; Softwoods; Pressure Treated; OSB; Laminated Beams; Rip Wood; Hardwoods\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProduct Group:\u003c\/strong\u003e Circular Saw Blades\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood Cutting - Framing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0624X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0624A -10:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCutting Wood Framing\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat circular saws is this 6-1\/2 in. Diablo framing blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is compatible with trim saws, corded circular saws, and cordless circular saws that accept a 6-1\/2 in. diameter blade with a 5\/8 in. arbor. It is rated for a maximum of 8800 RPM, which falls within the operating range of most 6-1\/2 in. circular saws.\u003c\/dd\u003e\n\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed to cut 2X lumber, softwoods, hardwoods, pressure treated wood, OSB, laminated beams, and rip wood - covering the full range of materials encountered in general framing and construction applications.\u003c\/dd\u003e\n\n \u003cdt\u003e\u003cstrong\u003eWhy does the kerf thickness matter for cordless saw users?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe.059 in. kerf on this blade removes less material with each pass compared to standard-kerf blades. This reduces the energy required per cut, which is especially beneficial when using a cordless circular saw - helping conserve battery charge and allowing more cuts per charge session.\u003c\/dd\u003e\n\n \u003cdt\u003e\u003cstrong\u003eWhat does the 18 deg. hook angle mean for cutting performance?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eA hook angle of 18 deg. is an aggressive setting that causes the blade teeth to engage the wood with greater forward bite. This translates to faster, more efficient cuts through framing lumber and rough construction materials, making it well-suited for high-volume ripping and crosscutting tasks on the jobsite.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771536629990,"sku":"D0624X","price":10.75,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":45771536662758,"sku":"D0624A -10","price":99.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/d0624x_main-image.jpg?v=1785951926"},{"product_id":"freud-d0640x-diablo-6-inch-40-tooth-atb-precision-finishing-saw-blades-5-pack","title":"Diablo 6\" x 40T Finish Saw Blade for Port-Cable Saw Boss D0640","description":"\u003cdiv\u003e\n \u003cp\u003e\u003cstrong\u003eDiablo 6\" x 40-Tooth Finish Saw Blade for Porter Cable Saw Boss\u003c\/strong\u003e is a thin kerf trim saw blade engineered by Diablo for smooth, splinter-free crosscuts in hardwood, softwood, and plywood. Designed specifically for portable and low-powered trim saws, this finish cutting blade extends battery and motor run time on Porter Cable Saw Boss and similar compact saws - making it an ideal choice for finish carpentry, trim work, and precision panel cutting on the jobsite. Manufactured in Italy with Diablo's TiCo Hi-Density Carbide technology, this 40-tooth ATB blade delivers clean, accurate results in demanding materials including laminate, melamine, OSB, and pressure treated lumber.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life - meaning the carbide formulation is matched to finish cutting demands, so the blade stays sharper longer and delivers consistent results through hardwoods, plywood, and engineered sheet goods\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf gives extremely fast, durable, and clean cuts - the.049\" kerf removes less material per pass, reducing load on low-powered trim saws and producing smoother finished edges with less tearout\u003c\/li\u003e\n \u003cli\u003eLaser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp - cooler running means longer blade life and a steadier cut, especially during extended trim saw sessions on the jobsite\u003c\/li\u003e\n \u003cli\u003eNon-stick Perma-Shield Coating reduces gumming, rusting, and corrosion - keeps the blade surface clean when cutting resinous woods, pressure treated lumber, and adhesive-backed laminates so the blade glides freely and lasts longer between cleanings\u003c\/li\u003e\n \u003cli\u003eLaser cut arbor for accurate blade rotation reducing vibration and premature wear - precise arbor geometry means the blade tracks true on the saw spindle, producing straighter cuts and protecting both the blade and the saw over time\u003c\/li\u003e\n \u003cli\u003e18 deg. hook angle optimized for finish crosscutting - this moderate positive hook angle balances feed rate and surface quality, helping produce clean, chip-free edges in hardwood and plywood face veneers\u003c\/li\u003e\n \u003cli\u003eMaximum 12,000 RPM rating - compatible with the full operating speed range of Porter Cable Saw Boss and similar high-speed trim saws, so you never have to derate or limit your tool's performance\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003ePurpose-built for trim saws - the thin.049\" kerf and 40-tooth ATB geometry are specifically matched to the lower motor power of Porter Cable Saw Boss and similar compact saws, reducing drag and extending runtime compared to standard circular saw blades\u003c\/li\u003e\n \u003cli\u003eHandles the widest range of finish materials on the jobsite - hardwoods, 2X lumber, laminate, melamine, plywood, OSB, and pressure treated lumber are all listed as approved materials, so one blade covers the full scope of typical finish carpentry and trim installation work\u003c\/li\u003e\n \u003cli\u003eDiablo's Perma-Shield Coating and TiCo Carbide combine to reduce downtime from blade cleaning and resharpening - the non-stick surface sheds resin and adhesive buildup while the premium carbide holds an edge through demanding cuts, keeping your work moving\u003c\/li\u003e\n \u003cli\u003eLaser-cut stabilizer vents and precision arbor geometry address the two most common sources of blade failure in portable saws - heat warping and vibration-induced wear - making this blade a dependable, long-lasting choice for finish cutting applications\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 40 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\/2\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .049\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 18 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .039\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 12000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Trim Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; 2X Lumber; Laminate; Melamine; Plywood; OSB; Pressure Treated\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Smooth finish crosscuts in hardwood, softwood, or plywood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0640A -1:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0640A -10:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFinish Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Diablo 6\" finish saw blade is designed for trim saws, and is proven to extend run time on Porter Cable Saw Boss and similar trim saw models. The 1\/2\" arbor and 6\" diameter are matched to the spindle and blade guard dimensions typical of these compact portable saws.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the ATB tooth grind mean for finish cutting results?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eATB stands for Alternate Top Bevel - a grind pattern where teeth alternate between left and right bevel angles. This geometry slices wood fibers cleanly on both sides of the cut, reducing tearout and splintering on the face of hardwoods, plywood veneers, laminate, and melamine for a smooth finished edge.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the difference between the kerf and the plate thickness on this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe kerf (.049\") is the total width of material removed by the blade as it cuts, while the plate thickness (.039\") is the thickness of the steel body of the blade itself. The difference between the two is the carbide tooth overhang on each side, which allows the plate to pass through the cut without binding against the workpiece.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eCan this blade cut pressure treated lumber and engineered panels?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. Pressure treated lumber, OSB, plywood, laminate, and melamine are all listed as compatible materials for this blade. The Perma-Shield Coating helps resist corrosion from the chemicals in pressure treated wood, and the TiCo Hi-Density Carbide provides the cutting life needed for abrasive engineered panel materials.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771536335078,"sku":"D0640A -1","price":16.62,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":45771536367846,"sku":"D0640A -10","price":147.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/D0640X_Main-Image.png?v=1785951926"},{"product_id":"freud-d0708lf-pcd-laminate-flooring-blade","title":"Diablo 7-1\/4\" x 8T PERGOBlade Saw Blade for Laminate \u0026 Wood Flooring D0708LF","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 7-1\/4\" x 8-Tooth PERGOBlade Saw Blade for Laminate and Wood Flooring\u003c\/strong\u003e is a specialty circular saw blade engineered by Diablo specifically for cutting laminate flooring, Pergo flooring, hardwood, engineered flooring, bamboo, and other wood-based floor materials with extreme precision and long-lasting durability. Unlike conventional carbide-tipped blades, this flooring saw blade features Polycrystalline Diamond (PCD) tooth technology that delivers over 75 times the cutting life - making it the go-to choice for flooring installers and contractors who demand clean, chip-free cuts across a wide range of floor covering materials.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003ePolycrystalline Diamond (PCD) teeth with unique tooth geometry\u003c\/strong\u003e - delivers an unmatched 75X cutting life compared to standard carbide blades, drastically reducing blade replacement frequency and downtime on the job.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHi-tech anti-kickback design\u003c\/strong\u003e - re-enforces the tooth for longer life, improving safety and reducing the risk of dangerous blade kick during laminate and hardwood flooring cuts.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser-cut anti-vibration design\u003c\/strong\u003e - reduces vibration and stabilizes the blade during operation, resulting in smoother, more controlled cuts through dense flooring materials.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD non-stick coating\u003c\/strong\u003e - reduces heat and friction buildup during cutting, protecting the blade and helping it glide through laminate and engineered flooring with less resistance.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAdvanced laser-cut stabilizer vents\u003c\/strong\u003e - absorb noise and vibration, and prevent sideways movement for precise, clean cuts through laminate, hardwood, and bamboo flooring panels.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e8-tooth blade configuration with a 10 deg. hook angle\u003c\/strong\u003e - optimized specifically for flooring applications, delivering fast, controlled material removal without splintering or chipping the surface finish.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible with circular saws and cordless circular saws\u003c\/strong\u003e - provides versatility across both corded and cordless tool platforms, so flooring crews can use a single blade regardless of their saw setup.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5\/8\" arbor with a.071\" kerf\u003c\/strong\u003e - fits standard circular saws and minimizes material waste per cut, preserving more of your flooring stock on each pass.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFlooring professionals cutting Pergo or other laminate products face rapid blade wear with conventional carbide blades - the PCD tooth design on this blade resolves that problem by lasting over 75 times longer, making it a cost-effective solution for high-volume flooring installation work.\u003c\/li\u003e\n \u003cli\u003eA single blade handles multiple floor types - laminate, hardwood, engineered flooring, bamboo, and softwoods - reducing the need to swap blades when transitioning between different flooring materials on the same job site.\u003c\/li\u003e\n \u003cli\u003eThe laser-cut stabilizer vents and anti-vibration design work together to minimize blade wobble and lateral drift, producing the precise, chip-free cuts that laminate and engineered flooring surfaces demand to look their best after installation.\u003c\/li\u003e\n \u003cli\u003eAt a 7-1\/4\" diameter with a maximum of 7900 RPM, this blade is sized for standard circular saws commonly used in flooring installation, meaning no special tooling or adapters are needed to put it to work immediately.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub-Brand:\u003c\/strong\u003e PERGOBlade\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e D0708LF\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-1\/4\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 8\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .071\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 10 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .051\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 7900\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Pergo Flooring; Laminate Flooring; Bamboo; Hardwoods; Softwoods\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eLaminate Floor Cutting\u003c\/li\u003e\n \u003cli\u003ePergo and other laminate flooring\u003c\/li\u003e\n \u003cli\u003eHardwood flooring\u003c\/li\u003e\n \u003cli\u003eEngineered flooring\u003c\/li\u003e\n \u003cli\u003eBamboo flooring\u003c\/li\u003e\n \u003cli\u003eWood flooring\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat makes this blade different from a standard carbide-tipped circular saw blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Diablo PERGOBlade uses Polycrystalline Diamond (PCD) teeth rather than conventional carbide tips. This tooth material and its unique geometry deliver over 75 times the cutting life compared to standard carbide saw blades, making it far more durable and cost-effective for repeated laminate and hardwood flooring cuts.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWill this blade work on a cordless circular saw?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The Diablo D0708LF is compatible with both corded circular saws and cordless circular saws. Its 5\/8\" arbor fits standard saw spindles, and the 7-1\/4\" diameter is a common size supported by most cordless platforms available to flooring contractors.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eCan this blade cut flooring materials other than laminate?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. While specifically designed for laminate flooring and Pergo products, this blade is also ideal for hardwood flooring, engineered flooring, bamboo, and other wood flooring materials. It outperforms carbide-tipped blades when cutting these other flooring types as well.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the maximum RPM rating for this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Diablo D0708LF PERGOBlade has a maximum rated speed of 7900 RPM. Always ensure your circular saw or cordless circular saw does not exceed this rated speed when using this blade for flooring applications.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35333762154657,"sku":"D0708LF -1","price":48.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/51rRrNZayVL.jpg?v=1785951927"},{"product_id":"wd-mtl-bld-6-1-232t-bk-1","title":"Diablo 7-1\/4\" x 36T Wood \u0026 Metal Carbide Saw Blade D0736GPX","description":"\u003cdiv\u003e\n \u003cp\u003e\u003cstrong\u003eDiablo 7-1\/4\" x 36 Tooth Wood and Metal Carbide Saw Blade\u003c\/strong\u003e is the industry's first multi-purpose circular saw blade designed to cut both clean wood and wood with nails as well as metal in a single versatile tool. Engineered by Diablo with proprietary TiCo carbide tips and a Chamfered-Alternate Top Bevel (C-ATB) tooth geometry, this blade eliminates the need to switch between dedicated wood and metal cutting blades - saving time and keeping work moving efficiently. Compatible with both corded and cordless circular saws, it handles 2X lumber, OSB, demolition material, steel studs, angle iron, threaded rod, and more, delivering clean, burr-free results across a broad range of jobsite cutting tasks.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDiablo TiCo Carbide tips - specially formulated carbide withstands impact, reduces wear, and lasts longer in both wood and metal cutting applications, meaning fewer blade changes and lower cost over time\u003c\/li\u003e\n \u003cli\u003eTri-Metal Shock Resistant Brazing - allows carbide tips to withstand extreme impact for maximum durability, so the blade holds up through demanding demolition and metal-cutting conditions\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD non-stick aluminum coating - protects the blade against heat, gumming, and corrosion, extending blade life and maintaining cutting performance in tough conditions\u003c\/li\u003e\n \u003cli\u003eAdvanced Laser Cut Stabilizer Vents - traps noise and vibration for maximum stability, keeping the blade cool and delivering accurate cuts in both wood and metal applications\u003c\/li\u003e\n \u003cli\u003eLaser Cut Thin Kerf Design at.067\" - provides less resistance and reduced heat build-up for easier cuts, greater accuracy, and longer cutting life in wood and metal\u003c\/li\u003e\n \u003cli\u003eLaser Cut Arbor - reduces vibration and premature wear for accurate blade rotation on corded and cordless saws, improving cut quality and extending tool life\u003c\/li\u003e\n \u003cli\u003eChamfered-Alternate Top Bevel (C-ATB) tooth design - provides impact resistance for cutting wood with nails alongside the precision needed for clean, burr-free metal cuts\u003c\/li\u003e\n \u003cli\u003eCuts up to 2-1\/4\" material thickness in clean wood and wood-with-nail applications - handles full-depth 2X lumber and demolition work without switching blades\u003c\/li\u003e\n \u003cli\u003eCuts 3\/32\"-1\/4\" wall thickness in steel studs, channel, angle iron, pipe, tubing, plate, and bar stock - a single blade covers a wide range of metal framing and structural cutting needs\u003c\/li\u003e\n \u003cli\u003eCuts 1\/4\"-1\" diameter threaded rod - handles common fastener and hardware cutting tasks on the jobsite without a specialty blade\u003c\/li\u003e\n \u003cli\u003e5 deg. hook angle with 8000 Maximum RPM rating - optimized geometry for controlled, stable cuts in both wood and metal at the speeds corded and cordless saws deliver\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eOne blade for wood and metal - the C-ATB tooth design paired with TiCo carbide handles everything from clean lumber and OSB to steel studs, angle iron, and threaded rod, reducing downtime spent changing blades between tasks\u003c\/li\u003e\n \u003cli\u003eBuilt for real demolition conditions - the Tri-Metal Shock Resistant Brazing and TiCo carbide formulation are specifically engineered to withstand the impact of cutting wood embedded with nails, making this blade well suited to remodel and tear-out work\u003c\/li\u003e\n \u003cli\u003eOptimized for cordless tools - the thin.067\" kerf and Laser Cut Arbor minimize resistance and vibration, so battery-powered circular saws get more cuts per charge while still delivering accurate, burr-free results\u003c\/li\u003e\n \u003cli\u003eCorrosion and heat protection built in - the Perma-SHIELD non-stick aluminum coating guards against gumming, heat damage, and rust, keeping the blade performing consistently across long work sessions and varied cutting environments\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-1\/4\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 36 C-ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .067\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 5 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e 2X Lumber; OSB; Demolition; Steel Studs; Angle Iron; Threaded Rod\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0736GPX:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0736GPX -5:\u003c\/strong\u003e 5 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eMulti-Purpose Material cutting - wood, wood with nails, and metal on a single blade\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of metal can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade cuts steel studs, channel, angle iron, pipe, tubing, plate, and bar stock with 3\/32\"-1\/4\" wall thickness, as well as threaded rod from 1\/4\" to 1\" diameter. It is not intended for heavy structural steel beyond these wall thickness limits.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eCan this blade cut wood with embedded nails?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The Chamfered-Alternate Top Bevel (C-ATB) tooth design and Tri-Metal Shock Resistant Brazing are specifically engineered to handle impact from nails in demolition and remodel cutting, while the TiCo carbide formulation resists the wear that nail contact causes.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eIs this blade compatible with cordless circular saws?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The blade is optimized for both corded and cordless circular saws. The Laser Cut Thin Kerf Design at.067\" reduces resistance and heat build-up, which helps preserve battery runtime on cordless tools while maintaining accurate, stable cuts.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the maximum material thickness this blade can cut in wood applications?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade cuts up to 2-1\/4\" material thickness in clean wood and wood-with-nail cutting applications, covering standard 2X lumber and typical demolition work within that depth range.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771536204006,"sku":"D0736GPX","price":24.47,"currency_code":"USD","in_stock":true},{"title":"5 Pk","offer_id":45771536236774,"sku":"D0736GPX -5","price":113.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/D0736GPA_Main-Image20191001_53d142e7-fcb9-47bd-950f-0fee414b1059.png?v=1785951928"},{"product_id":"freud-d0724a-diablo-7-1-4-inch-24-tooth-atb-framing-saw-blade-with-5-8-inch-and-diamond-knockout-arbor","title":"Diablo D0724A 7-1\/4-Inch 24 Tooth ATB Framing Saw Blade with 5\/8-Inch and Diamond Knockout Arbor - SEE PROMOS!","description":"\u003cdiv\u003e\n \u003cp\u003e\u003cstrong\u003eDiablo 7-1\/4-Inch 24 Tooth ATB Framing Saw Blade with 5\/8-Inch and Diamond Knockout Arbor\u003c\/strong\u003e is engineered for maximum durability and precision in demanding wood cutting applications. Built by Diablo for framers, roofers, remodelers, and concrete formers, this circular saw blade delivers effortless, ultra-smooth cuts through pressure-treated wood, 2x lumber, plywood, hardwoods, OSB, and laminated beams. Whether you are running a corded circular saw or pushing the limits of a cordless setup, this framing blade is designed to cut faster, last longer, and waste less material than standard carbide blades.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiCo+ Hi-Density Carbide teeth\u003c\/strong\u003e - stay sharper up to 10x longer than standard carbide blades, dramatically reducing blade change frequency on the job site and lowering long-term tooling costs.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAlternated Top Bevel (ATB) + Tracking Point tooth grind\u003c\/strong\u003e - improves tracking control, minimizes vibration, and delivers cleaner, more accurate cuts in framing lumber and engineered wood products.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThin.059-inch kerf design\u003c\/strong\u003e - reduces material waste and lowers amp draw, so you get faster, more effortless cutting with both cordless and corded circular saws while extending battery runtime.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTri-metal shock resistant brazing\u003c\/strong\u003e - allows carbide tips to withstand extreme impact, making this blade highly durable when cutting through tough framing materials or nail-embedded wood.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD non-stick coating\u003c\/strong\u003e - resists heat, gumming, and corrosion for consistently smooth blade performance over extended use, reducing drag and protecting the plate during heavy-duty cutting.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEnhanced Anti-Vibration design\u003c\/strong\u003e - provides the ideal combination of stability and rigidity, reducing operator fatigue and keeping cuts on track through demanding framing applications.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser cut arbor\u003c\/strong\u003e - reduces vibration and premature wear for accurate blade rotation when in use, contributing to longer blade life and more precise results.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible with 5\/8-inch and diamond knockout arbor configurations\u003c\/strong\u003e - ensures a secure, versatile fit across a wide range of corded and cordless circular saws used in general construction.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eOne Diablo framing blade replacing up to 10 standard carbide blades means fewer blade changes and significantly lower cost-per-cut on busy framing, roofing, and remodeling job sites.\u003c\/li\u003e\n \u003cli\u003eThe thin kerf design reduces amp draw, helping cordless circular saw users get more cuts per battery charge - a critical advantage when running cordless tools on large framing projects.\u003c\/li\u003e\n \u003cli\u003eThe combination of ATB + Tracking Point tooth geometry with the Anti-Vibration plate design gives you smoother, straighter cuts through 2x lumber, OSB, hardwoods, and laminated beams without sacrificing speed.\u003c\/li\u003e\n \u003cli\u003eMade in the United States and rated at up to 8000 RPM, this blade meets the performance demands of professional general construction applications while fitting the corded and cordless saws already in your arsenal.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProduct Group:\u003c\/strong\u003e Circular Saw Blades\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood Cutting\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub Category:\u003c\/strong\u003e Framing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-1\/4 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 24 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .040 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0724A -1:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0724A -10:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0724A -11PROMO:\u003c\/strong\u003e BUY 10 GET 1 FREE\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCutting Wood Framing\u003c\/li\u003e\n \u003cli\u003eCutting 2x lumber, plywood, hardwoods, engineered lumber, pressure-treated wood, OSB, and laminated beams\u003c\/li\u003e\n \u003cli\u003eGeneral construction applications including framing, roofing, remodeling, and concrete forming\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this Diablo framing blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is ideal for cutting pressure-treated wood, 2x lumber, plywood, hardwoods, OSB, engineered lumber, and laminated beams. It is well suited for general construction applications including framing, roofing, remodeling, and concrete forming.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat circular saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for use with both corded circular saws and cordless circular saws. It features a 5\/8-inch and diamond knockout arbor, providing a secure fit across a wide range of saw models used in professional construction.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the thin kerf design benefit cordless saw users?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe thin.059-inch kerf reduces material waste and lowers amp draw, which translates to faster, more effortless cuts and more efficient use of battery power on cordless circular saws - helping users complete more cuts per battery charge compared to blades with a wider kerf.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is TiCo+ Hi-Density Carbide and why does it matter for framing?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eTiCo+ Hi-Density Carbide is a specially optimized carbide formulation used in this blade's teeth. It extends sharpness and durability up to 10x longer than standard carbide blades, which means significantly fewer blade changes and lower overall tooling costs on high-volume framing, roofing, and remodeling job sites.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771536105702,"sku":"D0724A -1","price":10.9,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":45771536171238,"sku":"D0724A -10","price":89.5,"currency_code":"USD","in_stock":true},{"title":"BUY 10 GET 1 FREE","offer_id":40342188621985,"sku":"D0724A -11PROMO","price":100.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/D0724A_Main-Image.png?v=1780513767"},{"product_id":"freud-d1040w-diablo-10-1-4-inch-40-tooth-atb-general-purpose-saw-blade-with-5-8-inch-and-diamond-knockout-arbor","title":"Diablo 10-1\/4\" x 40T General Purpose Beam Saw Blade for Wood D1040W","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 10-1\/4\" x 40-Tooth General Purpose Beam Saw Blade for Wood\u003c\/strong\u003e is engineered specifically for worm drive saws equipped with a 5\/8\" diamond knockout arbor, delivering the power and precision needed for heavy-duty framing, beam cutting, and structural lumber work. Built by Diablo with Italian craftsmanship, this 40 ATB blade handles demanding crosscuts and rip cuts through pressure treated wood, plywood, rafters, beams, posts, oak, pine, OSB, and laminated beams - making it a go-to choice for framing contractors, deck builders, and serious DIYers who need consistent, clean results on thick stock. It is capable of slicing through 4x headers and fence posts, sandwiched 2x headers, exposed deck and porch beams, and up to 7 sheets of 1\/2\" plywood in a single pass.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide teeth - a high-performance carbide formula engineered for each specific application, delivering sharper cutting action and longer edge retention across a wide range of wood materials\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD Non-stick Coating - protects the blade plate from heat buildup, pitch gumming, and corrosion, reducing friction and extending the usable life of the blade in pressure treated and resinous wood applications\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf at.087\" - removes less material per cut, resulting in faster feed rates, reduced motor strain on worm drive and circular saws, and cleaner cut surfaces\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing - bonds carbide tips to the steel plate with exceptional toughness, allowing the blade to withstand extreme impact when cutting through knotted lumber, nails, and dense laminated beams\u003c\/li\u003e\n \u003cli\u003eHardened steel body at.063\" plate thickness - maintains blade flatness and rigidity under load, contributing to a longer service life and a consistently sharp cutting edge even during extended heavy use\u003c\/li\u003e\n \u003cli\u003e18 deg. hook angle - an aggressive geometry that promotes fast, efficient stock removal during both crosscuts and rip cuts in framing and structural lumber\u003c\/li\u003e\n \u003cli\u003e7,000 maximum RPM rating - compatible with high-speed worm drive saws, cordless circular saws, and corded circular saws for broad tool versatility on the job site\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDesigned specifically for worm drive saws with a 5\/8\" diamond knockout arbor - this is not a generic circular saw blade adapted for beam work, but a purpose-built tool that matches the torque and geometry of worm drive platforms for reliable performance on thick, structural cuts\u003c\/li\u003e\n \u003cli\u003eCuts through the thickest framing stock in a single pass - handling 4x headers, fence posts, sandwiched 2x headers, exposed beams, and multiple sheets of 1\/2\" plywood without stopping mid-cut, saving significant time on large framing and deck projects\u003c\/li\u003e\n \u003cli\u003eVersatile enough for crosscuts and rip cuts across hardwoods, softwoods, pressure treated lumber, plywood, OSB, and laminated beams - one blade covers the full range of materials found on residential and light commercial job sites\u003c\/li\u003e\n \u003cli\u003eThe combination of Perma-SHIELD coating and TiCo carbide reduces blade changes and downtime by resisting the heat, gumming, and corrosion that commonly degrade blades in pressure treated and outdoor lumber applications\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10-1\/4\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 40 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .087\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 18 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .063\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 7000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw; Wormdrive Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Pressure Treated; Plywood; OSB; Laminated Beams\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1040W:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1040W -8:\u003c\/strong\u003e 8 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eGeneral Purpose Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat type of saw is this blade designed for?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is specifically designed for use on a worm drive saw with a 5\/8\" diamond knockout arbor. It is also compatible with corded circular saws and cordless circular saws that accept a 5\/8\" arbor and operate within the 7,000 maximum RPM limit.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the thickest material this blade can cut in a single pass?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade can cut through 4x headers and fence posts, sandwiched 2x headers, exposed beams for decks and porches, and up to 7 sheets of 1\/2\" plywood in one pass when used on a compatible worm drive saw.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eCan this blade be used on pressure treated lumber?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. This blade is rated for use in pressure treated wood, and the Perma-SHIELD Non-stick Coating is specifically designed to protect against the heat, gumming, and corrosion associated with cutting treated lumber and resinous materials.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the tooth configuration and hook angle on this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe blade features 40 ATB (Alternate Top Bevel) teeth and an 18 deg. hook angle, which provides an aggressive cutting geometry suited for fast crosscuts and rip cuts through a wide variety of dimensional lumber, plywood, OSB, and laminated beams.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771535810790,"sku":"D1040W","price":37.32,"currency_code":"USD","in_stock":true},{"title":"8 Pk","offer_id":45771535843558,"sku":"D1040W -8","price":248.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/d1040w_main-image_1.jpg?v=1785951928"},{"product_id":"freud-8-x-20t-box-joint-cutter-set-sbox8","title":"Freud 8\" 20T Box Joint Cutter Set - 1\/4\" and 3\/8\" Grooves SBOX8","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eFreud 8\" Box Joint Cutter Set\u003c\/strong\u003e gives woodworkers a dedicated solution for cutting perfectly square, flat-bottom box joints on a table saw - no dado set or separate saw blade required. Designed for both stationary and portable table saw use, this 2-blade set handles hardwoods, softwoods, laminate, plywood, and OSB with precision and control. Whether you are tackling fine cabinet joinery or everyday woodworking projects, Freud engineered this cutter set to make box joint construction straightforward and repeatable.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDoes not need a dado set or saw blade - simplifies your setup and reduces the number of accessories required for box joint work on a table saw\u003c\/li\u003e\n \u003cli\u003ePremium TiCo HI-Density Carbide Crosscutting Blend - delivers maximum cutting performance and extended blade life across a wide range of wood and sheet materials\u003c\/li\u003e\n \u003cli\u003eSilver I.C.E. Coating prevents build-up on the blade surface - keeps the blade running cooler and cleaner, reducing friction and improving cut quality over time\u003c\/li\u003e\n \u003cli\u003eAnti-kickback design on all blades - provides an important safety measure that helps limit the risk of dangerous kickback during table saw operation\u003c\/li\u003e\n \u003cli\u003eCuts both 1\/4\" and 3\/8\" grooves - gives you two common box joint widths from a single set, expanding the range of joints you can produce\u003c\/li\u003e\n \u003cli\u003e20 deg. hook angle - promotes smooth, controlled material feed and clean crosscuts in both solid wood and engineered panel materials\u003c\/li\u003e\n \u003cli\u003e5\/8\" arbor - fits the standard arbor size found on most stationary and portable table saws, making compatibility straightforward\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eEliminates the need for a dado set or extra saw blade - this dedicated box joint cutter set keeps your workflow focused and your tool investment targeted to the task at hand\u003c\/li\u003e\n \u003cli\u003eCuts both 1\/4\" and 3\/8\" groove widths in a single set - giving you flexibility to match joint size to your project material thickness without switching between separate tooling\u003c\/li\u003e\n \u003cli\u003eThe Silver I.C.E. Coating and TiCo HI-Density Carbide together address two common performance challenges - heat buildup and dulling - helping maintain cleaner cuts across hardwoods, softwoods, laminate, plywood, and OSB\u003c\/li\u003e\n \u003cli\u003eIncludes instructions for making box joints and building a box joint jig - making this a practical starting point for woodworkers who are new to box joint construction or refining their technique\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freud\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e SBOX8\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 20\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 20 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWidth of Cut:\u003c\/strong\u003e 1\/4\" Groove and 3\/8\" Groove\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Laminate; Plywood; OSB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTo create a perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e2 blades\u003c\/li\u003e\n \u003cli\u003eInstructions for making box joints\u003c\/li\u003e\n \u003cli\u003eInstructions for building a box joint jig\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat groove widths can this set cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Freud SBOX8 cuts both 1\/4\" and 3\/8\" grooves, giving you two of the most common box joint widths from a single 2-blade set without any additional tooling.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eDo I need a dado set to use this box joint cutter set?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eNo - one of the key design advantages of the Freud SBOX8 is that it does not require a dado set or a separate saw blade. It is a self-contained solution for cutting box joints on a stationary or portable table saw.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can the SBOX8 cut through?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis cutter set is designed to work with hardwoods, softwoods, laminate, plywood, and OSB, making it suitable for a broad range of woodworking and cabinetry applications.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat safety features does this set include?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Freud SBOX8 blades feature an anti-kickback design that helps reduce the risk of dangerous kickback during table saw use, providing an added layer of safety during operation.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"Freud","offers":[{"title":"Default Title","offer_id":35339037769889,"sku":"SBOX8","price":102.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/51DKgJo119L.jpg?v=1785951959"},{"product_id":"freud-d0740a-diablo-7-1-4-40-tooth-atb-finishing-saw-blade-with-5-8-inch-arbor-diamond-knockout-and-permashield-coating","title":"Diablo 7-1\/4\" x 40T Finish Saw Blade for Wood D0740A","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 7-1\/4\" x 40-Teeth Finish Saw Blade for Wood\u003c\/strong\u003e is engineered for smooth, clean cuts in hardwood, softwood, plywood, laminate, and melamine. Designed by Diablo for use with standard and cordless circular saws, this finish blade delivers a noticeably cleaner edge than a typical framing blade while still maintaining excellent cutting speed and long service life - making it a reliable everyday choice for jobsite finish work including decking, fencing, fascia, and dimensional lumber.\u003c\/p\u003e\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eHigh-performance TiCo Hi-Density carbide specifically designed for each application - maximizes cutting performance and extends blade life across hardwoods, softwoods, and sheet goods\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion - keeps the blade running cooler and cleaner through demanding jobsite cuts\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf for fast, durable, and clean cuts - the.059\" kerf removes less material per pass, reducing strain on the saw motor and improving cut quality\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability - ideal for rough jobsite conditions where blades face repeated stress\u003c\/li\u003e\n \u003cli\u003eHardened Steel Body - warrants a longer life and sharper cutting edge, maintaining accurate cuts over extended use\u003c\/li\u003e\n \u003cli\u003e40 ATB tooth configuration at a 15 deg. hook angle - balances aggressive feed with a smooth finish on crosscuts and rip cuts in wood and plywood\u003c\/li\u003e\n \u003cli\u003e5\/8\" arbor size - fits the vast majority of 7-1\/4\" circular saws, both corded and cordless, for broad tool compatibility\u003c\/li\u003e\n \u003cli\u003e8000 maximum RPM rating - designed to operate safely within the speed range of standard circular saws\u003c\/li\u003e\n \u003cli\u003eMade in the United States - domestic manufacturing supporting consistent quality standards\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDelivers a smoother cut edge than a framing blade without sacrificing cutting speed - giving finish carpenters and contractors the quality they need on visible surfaces like fascia, decking, and trim without slowing down the job\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD Non-stick Coating and hardened steel body work together to resist heat buildup, gumming, and corrosion - extending the working life of the blade in demanding or outdoor jobsite environments\u003c\/li\u003e\n \u003cli\u003eCompatible with both corded circular saws and cordless circular saws via the standard 5\/8\" arbor - one blade handles a wide range of tools already on the jobsite\u003c\/li\u003e\n \u003cli\u003eRated for hardwoods, 2X lumber, laminate, melamine, plywood, and OSB - a versatile finish-cut blade that handles the full range of materials found in framing, decking, fencing, and trim applications\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-1\/4\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 40 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .040\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; 2X Lumber; Laminate; Melamine; Plywood; OSB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e High quality crosscuts and rip cuts in wood, plywood and melamine\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0740A:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0740A -10P:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFinish Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this Diablo finish saw blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for high quality crosscuts and rip cuts in hardwoods, 2X lumber, laminate, melamine, plywood, and OSB. It is well suited for jobsite finish cuts in decking, fencing, fascia, and dimensional 1X lumber.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis 7-1\/4\" blade is compatible with both corded circular saws and cordless circular saws. It uses a standard 5\/8\" arbor and is rated for a maximum of 8000 RPM.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the 40-tooth ATB configuration compare to a framing blade for finish cuts?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe 40 ATB (Alternating Top Bevel) tooth configuration at a 15 deg. hook angle is designed to produce a smoother edge than a standard framing blade. It provides an excellent combination of cutting speed and clean finish quality in hardwood, softwood, and plywood - making it the right choice when cut appearance matters.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the Perma-SHIELD coating and why does it matter?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Perma-SHIELD Non-stick Coating is a protective layer applied to the blade body that shields it from heat, pitch gumming, and corrosion. This helps the blade run cooler and cleaner through extended cuts, which contributes to a longer working life and more consistent cut quality across demanding materials like melamine and laminate.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771531190502,"sku":"D0740A","price":14.82,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":45771531256038,"sku":"D0740A -10P","price":136.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/g4o1e7lxvv4v96iozyl1.png?v=1785951927"},{"product_id":"freud-d1024x-diablo-10-24-tooth-atb-ripping-saw-blade-5-8-arbor","title":"Diablo 10\" x 24T Ripping Saw Blade for Wood D1024X","description":"\u003cdiv\u003e\n \u003cp\u003e\u003cstrong\u003eDiablo 10-Inch x 24-Teeth Ripping Saw Blade for Wood\u003c\/strong\u003e is engineered for professionals and serious woodworkers who demand the smoothest, fastest, and most accurate rip cuts through rough framing lumber, finish lumber, plywood, OSB, and hardboard siding. Built with a thin kerf design, this circular saw blade draws less power from both the user and the saw, giving you better control and reduced fatigue on every pass. Diablo's proprietary carbide formulation and extra-tough steel plate deliver the kind of long-lasting performance that keeps framing and general construction projects moving efficiently.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiCo Hi-Density Carbide Tips\u003c\/strong\u003e - high performance carbide specifically designed for ripping applications, staying sharper longer through hardwoods, softwoods, pressure-treated lumber, plywood, and OSB.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD Non-stick Coating\u003c\/strong\u003e - protects the blade from heat buildup, pitch gumming, and corrosion, extending blade life and reducing friction during rip cuts.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSuper Thin Laser-Cut Kerf (.098 in.)\u003c\/strong\u003e - removes less material with every pass, requiring less motor power and delivering faster, cleaner cuts through 3\/4 in. to 2-3\/4 in. stock.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTri-Metal Shock Resistant Brazing\u003c\/strong\u003e - bonds carbide tips with exceptional strength so they can withstand extreme impact, reducing the risk of tip loss and extending overall blade durability.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHardened Steel Body (.071 in. plate)\u003c\/strong\u003e - resists warping and flexing under load, maintaining a truer cut line and a sharper cutting edge over a longer service life.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e24 ATB Tooth Geometry with 15 deg. Hook Angle\u003c\/strong\u003e - optimized for aggressive, efficient ripping that feeds smoothly through wood grain with minimal tear-out.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5\/8 in. Arbor\u003c\/strong\u003e - fits portable table saws and stationary table saws for broad compatibility across common job site and shop configurations.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum 6000 RPM Rating\u003c\/strong\u003e - engineered to perform safely at the speeds typical of portable and stationary table saw applications.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eThe thin kerf design reduces cutting resistance, meaning your saw works less hard and you maintain better control - a real advantage when ripping long boards or full sheets of plywood and OSB on a job site.\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD non-stick coating actively fights pitch buildup and corrosion, so the blade stays cleaner and cuts more freely through pressure-treated and resinous lumber without constant cleaning.\u003c\/li\u003e\n \u003cli\u003eTri-metal brazing and TiCo Hi-Density carbide tips are purpose-built for impact resistance, making this blade a practical choice for rough framing applications where blades take a beating from knotty or dense lumber.\u003c\/li\u003e\n \u003cli\u003eCompatible with both portable and stationary table saws, this 10 in. ripping blade covers a wide range of general construction and woodworking setups - from job site saws to shop-based ripping operations.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 24 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .098 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .071 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 6000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Portable Table Saw; Stationary Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Pressure Treated; Plywood; OSB; 2X Lumber; Rip Wood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Superior quality rip cuts (3\/4 in. to 2-3\/4 in.) in wood, plywood and OSB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1024X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1024X -10P:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eRipping Wood - fast, efficient rip cuts through 3\/4 in. to 2-3\/4 in. lumber, plywood, OSB, and hardboard siding in general construction and woodworking applications.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of materials can this Diablo ripping blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed to cut hardwoods, softwoods, pressure-treated lumber, plywood, OSB, 2X lumber, rough framing lumber, finish lumber, and hardboard siding. It is optimized for superior quality rip cuts ranging from 3\/4 in. to 2-3\/4 in. in thickness.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat saws is this 10 in. Diablo blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade fits both portable table saws and stationary table saws with a standard 5\/8 in. arbor. It is rated for a maximum of 6000 RPM, which covers typical operating speeds for those saw types.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the thin kerf design mean for my cuts and my saw?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe thin kerf (.098 in.) means the blade removes less material with each pass. This requires less cutting power from both the user and the saw motor, which translates to better control over the cut, reduced fatigue, and faster feed rates through lumber and sheet goods.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does Perma-SHIELD coating benefit this ripping saw blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Perma-SHIELD non-stick coating on the blade body protects it from heat buildup, pitch gumming, and corrosion. This keeps the blade running cleaner through resinous woods and pressure-treated lumber, extending blade life and maintaining cut quality over time.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771530830054,"sku":"D1024X","price":31.16,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":45771530862822,"sku":"D1024X -10P","price":286.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/xdkpwvvx30wdrgxszmef.png?v=1785951928"},{"product_id":"diablo-d0524x-rim-saw-blade","title":"Diablo 5-3\/8\" x 24T Framing Saw Blade for Wood D0524X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 5-3\/8\" x 24-Teeth Framing Saw Blade for Wood\u003c\/strong\u003e is engineered for demanding general construction work, delivering fast and accurate ripping and crosscutting through a wide range of wood materials. Designed for use with trim saws, this Diablo circular saw blade handles rough framing lumber, finish lumber, plywood, OSB, laminated beams, pressure treated wood, and hardboard siding with equal confidence. Its thin kerf design draws less power from the saw, giving users better control on every cut - making it a reliable choice for framing crews, finish carpenters, and contractors who need consistent performance throughout a long workday.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide tips specifically engineered for each cutting application - delivers maximum cutting life so the blade stays sharp through extended framing work without frequent replacement\u003c\/li\u003e\n \u003cli\u003eSuper thin laser-cut kerf at.049\" - removes less material per pass, reducing resistance and allowing faster, cleaner cuts with less strain on the saw motor\u003c\/li\u003e\n \u003cli\u003eLaser-cut stabilizer vents trap noise and vibration, keeping the blade cool during continuous use and reducing the risk of blade warp that can cause inaccurate cuts\u003c\/li\u003e\n \u003cli\u003eNon-stick Perma-Shield Coating on the blade plate - resists gumming from resin-heavy lumber, as well as rusting and corrosion, extending the useful life of the blade in outdoor and humid job site conditions\u003c\/li\u003e\n \u003cli\u003eLaser-cut arbor for precise blade rotation - minimizes vibration during cutting and reduces premature wear on both the blade and the saw's arbor shaft\u003c\/li\u003e\n \u003cli\u003e18 deg. hook angle with 24 ATB tooth geometry - optimized for aggressive material removal during framing while maintaining a smooth, controlled cut through hardwoods and engineered wood products\u003c\/li\u003e\n \u003cli\u003eExtra-tough steel plate at.039\" thickness - provides the rigidity needed for straight, consistent cuts through thick lumber and laminated beams without flex or deflection\u003c\/li\u003e\n \u003cli\u003eMaximum 12,000 RPM rating - compatible with high-speed trim saws for fast production framing on the job site\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eThe thin kerf design (.049\") requires less cutting power from the saw, reducing user fatigue during full days of framing - a meaningful advantage when cutting 2X lumber and pressure treated material repeatedly throughout a project\u003c\/li\u003e\n \u003cli\u003eThe Perma-Shield Coating and TiCo Hi-Density carbide work together to extend blade life beyond standard framing blades, reducing how often you need to swap blades mid-job when cutting resinous or treated lumber\u003c\/li\u003e\n \u003cli\u003eLaser-cut stabilizer vents actively reduce heat buildup and vibration during extended cuts through OSB, laminated beams, and hardwood framing materials - keeping cuts straight and the blade performing consistently throughout the day\u003c\/li\u003e\n \u003cli\u003eWith a 10mm arbor and 5-3\/8\" diameter, this blade is sized specifically for compact trim saws, making it the right fit for contractors who need a high-performance wood framing blade in a lightweight, maneuverable tool\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e D0524X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 5-3\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 24 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 10mm\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .049\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 18 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .039\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 12000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Trim Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; 2X Lumber; Pressure Treated; OSB; Laminated Beams\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCutting Wood Framing\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of wood can this Diablo framing blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed to cut hardwoods, 2X lumber, pressure treated lumber, OSB, and laminated beams. It is also suited for rough framing lumber, high quality finish lumber, plywood, and hardboard siding.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat saw is this 5-3\/8\" Diablo blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for use with trim saws. It has a 10mm arbor and a 5-3\/8\" diameter, and is rated for a maximum of 12,000 RPM. Always confirm your saw's arbor size and maximum blade diameter before installing.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the thin kerf design mean for cutting performance?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe.049\" thin kerf removes less material per pass, which requires less cutting power from both the user and the saw. This results in faster cuts, better control over the blade, and reduced fatigue during extended framing work.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the Perma-Shield Coating benefit this blade on the job site?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe non-stick Perma-Shield Coating reduces gumming from resinous lumber, and resists rusting and corrosion. This helps the blade perform consistently in outdoor and humid conditions common on construction job sites, and extends the overall working life of the blade.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35340310347937,"sku":"D0524X","price":15.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/t1psoge8g936tlvkn3fl.png?v=1785951926"},{"product_id":"freud-d1050x-diablo-10-50-tooth-atb-combo-saw-blade-w-5-8-arbor-permashield","title":"Diablo 10\" x 50T Combination Saw Blade for Wood D1050X","description":"\u003cdiv\u003e\n \u003cp\u003e\u003cstrong\u003eDiablo 10\" x 50-Teeth Combination Saw Blade for Wood\u003c\/strong\u003e is engineered for woodworkers and tradespeople who need a single blade capable of delivering high quality rip cuts and crosscuts in hardwoods, softwoods, plywood, and melamine. Made by Diablo and crafted in Italy, this 10\" combination blade is the ideal table saw solution when switching between ripping and crosscutting operations - eliminating blade changes while maintaining a smooth, clean finish on every pass.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide teeth - a high performance carbide formulation specifically designed for combination cutting applications, resulting in longer cutting life and superior performance through both rip and crosscut operations\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD non-stick coating - protects the blade body from heat buildup, pitch gumming, and corrosion, keeping the blade running cleanly and reducing friction through the cut\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf (.098\") - removes less material per pass for faster, more efficient cuts while producing a clean, splinter-reduced finish\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing - bonds carbide tips to the plate with extreme durability, allowing the blade to withstand heavy impact without tip loss during demanding ripping and crosscutting tasks\u003c\/li\u003e\n \u003cli\u003eHardened steel body (.071\" plate) - maintains blade flatness and rigidity over time, delivering a sharper cutting edge and a longer usable blade life\u003c\/li\u003e\n \u003cli\u003e50 ATB tooth configuration with large gullets - each group of 5 teeth separated by a wide gullet provides efficient chip evacuation during ripping while the close tooth grouping within each set delivers the finer bite needed for smooth crosscuts\u003c\/li\u003e\n \u003cli\u003e15 deg. hook angle - optimized for combination cutting, balancing aggressive feed during ripping with controlled, chip-free performance when crosscutting\u003c\/li\u003e\n \u003cli\u003e5\/8\" arbor and 6000 maximum RPM rating - compatible with a wide range of table saws and miter saws, including stationary table saws, portable table saws, miter saws, and slide miter saws\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eOne blade for two operations - the 50-tooth ATB combination design with large gullets handles both ripping and crosscutting in wood and wood composites, so you spend less time swapping blades and more time working\u003c\/li\u003e\n \u003cli\u003eBuilt for table saw versatility - compatible with stationary table saws, portable table saws, miter saws, and slide miter saws, making it a practical choice for job site and shop environments alike\u003c\/li\u003e\n \u003cli\u003eSmooth finish in demanding materials - the tooth geometry and Perma-SHIELD non-stick coating work together to produce clean, accurate cuts in hardwoods, softwoods, plywood, and melamine without excessive heat or gumming\u003c\/li\u003e\n \u003cli\u003eLong-term durability through premium construction - the combination of TiCo Hi-Density carbide, tri-metal brazing, and a hardened steel body means the blade maintains cutting performance through extended, heavy-duty use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 50 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .098\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .071\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 6000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Miter Saw; Slide Miter Saw; Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Plywood; Melamine\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1050X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1050X -8:\u003c\/strong\u003e 8 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eRipping and Crosscutting Wood - produces high quality rip cuts and crosscuts in solid wood, plywood, and melamine using a single combination blade\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat makes a combination blade different from a dedicated ripping or crosscut blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eA combination blade uses a repeating group of 5 teeth separated by a large gullet. The large gullet provides the chip removal space required while ripping, and the close grouping of teeth within each set provides the smaller bite size required when crosscutting. This design allows a single blade to handle both cut types without changing blades.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Diablo combination blade is designed for use in hardwoods, softwoods, plywood, and melamine. It is suitable for high quality crosscuts and rip cuts across these wood and wood composite materials.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhich tools is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe 5\/8\" arbor and 10\" diameter make this blade compatible with miter saws, slide miter saws, stationary table saws, and portable table saws. The maximum rated speed is 6000 RPM - always verify your saw's RPM rating does not exceed this before use.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the Perma-SHIELD coating and why does it matter?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003ePerma-SHIELD is Diablo's non-stick coating applied to the blade body. It protects the blade from heat buildup, pitch and resin gumming, and corrosion - all common issues when cutting through hardwoods, softwoods, and composite panels. This coating helps the blade glide through material more freely and extends the working life of the blade.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":45771530109158,"sku":"D1050X","price":44.03,"currency_code":"USD","in_stock":true},{"title":"8 Pk","offer_id":45771530141926,"sku":"D1050X -8","price":323.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/x80gls2vuicsrdaemthe.png?v=1785951928"},{"product_id":"diablo-d1080x-10-80-tpi-ultra-finish-chop-slide-miter-and-table-saw-blade","title":"Diablo 10\" x 80T Ultra Finish Saw Blade for Wood D1080X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 10\" x 80-Teeth Ultra Finish Saw Blade for Wood\u003c\/strong\u003e is engineered for trim crews and woodworking professionals who demand flawless finish cuts on miter saws and table saws alike. Featuring 80 Hi-ATB teeth with a specialized cutting geometry, this Diablo circular saw blade delivers extremely smooth crosscuts in hardwoods, softwoods, veneered plywood, melamine, and MDF - minimizing blowout and virtually eliminating rework. Whether you are running a sliding miter saw on the jobsite or a stationary table saw in the workshop, this ultra finish wood cutting blade keeps your work clean, precise, and production-ready.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiCo Hi-Density Carbide Teeth\u003c\/strong\u003e - high-performance carbide formulated specifically for ultra finish cutting applications, maintaining a sharper edge longer for consistent results across hardwoods, softwoods, and composite sheet goods\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e80 Hi-ATB Tooth Configuration\u003c\/strong\u003e - the high tooth count combined with a 15 deg. hook angle produces extremely smooth, chip-free cuts in melamine, veneered plywood, and MDF with minimal grabbing or blowout\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD Non-stick Coating\u003c\/strong\u003e - protects the blade plate from heat, gumming, and corrosion, extending blade life and reducing friction during demanding finish cuts\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSuper Thin Laser Cut Kerf (.098\")\u003c\/strong\u003e - removes less material per pass, resulting in faster, cleaner cuts with less strain on your saw motor and improved accuracy on fine finish work\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTri-metal Shock Resistant Brazing\u003c\/strong\u003e - bonds carbide tips to the plate with exceptional strength, allowing the blade to withstand extreme impact and prolonging tip retention during heavy use\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHardened Steel Body (.071\" plate)\u003c\/strong\u003e - provides a rigid, stable platform that resists warping and flexing, delivering a longer blade life and a consistently sharp cutting edge through repeated use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDesigned specifically for trim crews using sliding or chop-style miter saws, this blade produces flawless crosscuts in hardwoods and softwoods with minimal rework - saving time and material on finish carpentry projects\u003c\/li\u003e\n \u003cli\u003eThe 80-tooth Hi-ATB geometry makes chip-free cuts in veneered plywood and melamine possible, giving cabinetmakers and millwork professionals clean edges on both faces of delicate sheet goods\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD non-stick coating and hardened steel body work together to resist heat and corrosion, keeping the blade running true across extended jobsite or workshop use\u003c\/li\u003e\n \u003cli\u003eCompatible with miter saws, slide miter saws, stationary table saws, and portable table saws - a single versatile blade that transitions seamlessly between your primary cutting tools\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e D1080X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 80 Hi-ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .098\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .071\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 6000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Miter Saw; Slide Miter Saw; Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Veneered Plywood; Melamine; Paneling; MDF; Crosscut Wood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eUltra Finish Wood Cutting\u003c\/li\u003e\n \u003cli\u003eFine finish crosscuts in Hardwoods and Softwoods\u003c\/li\u003e\n \u003cli\u003eChip free cuts in Veneered Plywood, Melamine, and MDF\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Diablo 10\" blade is designed for use with miter saws, slide miter saws, stationary table saws, and portable table saws. It is particularly well suited for sliding or chop-style miter saws used by trim crews, as well as jobsite and workshop table saws.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can this blade cut cleanly?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe D1080X is engineered for fine finish crosscuts in hardwoods and softwoods, and delivers chip-free cuts in veneered plywood, melamine, paneling, and MDF. The 80 Hi-ATB tooth configuration minimizes blowout on delicate or composite materials.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the maximum RPM rating for this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is rated for a maximum of 6000 RPM. Always confirm your saw's RPM output does not exceed this rating before use.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the Perma-SHIELD coating do for this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Perma-SHIELD non-stick coating protects the blade plate from heat buildup, gumming from resins and adhesives, and corrosion. This reduces friction during cutting and helps extend the overall working life of the blade across extended finish cutting applications.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35340322144417,"sku":"D1080X","price":51.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/sneenxtflzbiyiy4rwmt.png?v=1785951929"},{"product_id":"freud-d1632x-atb-general-purpose-beam-cutting-saw-blade","title":"Diablo 16-5\/16\" x 32T General Purpose Saw Blade for Wood D1632X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 16-5\/16\" x 32-Tooth General Purpose Saw Blade for Wood\u003c\/strong\u003e is a professional-grade circular saw blade engineered for demanding wood cutting tasks across a wide range of materials. Designed by Diablo, this blade handles both crosscuts and rip cuts in hardwoods, softwoods, pressure treated lumber, laminated beams, and engineered lumber products such as laminated veneer lumber, Paralams, and glulams - making it a versatile choice for timber framing, structural work, and general carpentry. Whether you are cutting oak, pine, rafters, posts, or beams, this 32-tooth ATB blade delivers fast, clean, and durable results on circular saws and cordless circular saws.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide teeth - a high-performance carbide formulation specifically designed for the application, extending tooth life and maintaining a sharper edge through demanding cuts in hardwoods and engineered lumber\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD non-stick coating - protects the blade body from heat buildup, pitch gumming, and corrosion, reducing friction and keeping the blade running smoothly through repeated cuts\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf at.114\" - removes less material per pass, allowing faster cutting with less strain on the saw motor and cleaner results in dimensional lumber and laminated beams\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing - bonds carbide tips to the plate with exceptional strength, enabling the blade to absorb extreme impact without tip loss during heavy-duty timber framing cuts\u003c\/li\u003e\n \u003cli\u003eHardened steel body at.079\" plate thickness - provides long blade life and supports a consistently sharp cutting edge, reducing the frequency of blade changes on the job site\u003c\/li\u003e\n \u003cli\u003e32 ATB tooth configuration - the alternate top bevel geometry delivers clean, efficient cuts in both grain directions, making this blade effective for crosscuts and rip cuts alike\u003c\/li\u003e\n \u003cli\u003e22 deg. hook angle - an aggressive hook angle that pulls material through the cut efficiently, improving feed rate when working through thick lumber, beams, and posts\u003c\/li\u003e\n \u003cli\u003e1\" arbor - fits standard large-format circular saws used in timber framing and structural carpentry applications\u003c\/li\u003e\n \u003cli\u003e4000 maximum RPM rating - rated for safe, high-speed operation on compatible circular saws and cordless circular saws\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eEngineered specifically for timber framing materials - this blade is designed to handle laminated veneer lumber, Paralams, glulams, rafters, and posts, making it a purpose-built tool for structural and framing applications rather than a generic wood blade\u003c\/li\u003e\n \u003cli\u003eThe combination of TiCo Hi-Density carbide and tri-metal shock resistant brazing means the blade maintains cutting performance and tip integrity through repeated passes in hard, abrasive, and composite materials such as pressure treated lumber and hardwoods\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD coating and hardened steel body address two common blade failure points - heat and corrosion - extending usable blade life and reducing downtime for replacements during extended framing or beam cutting projects\u003c\/li\u003e\n \u003cli\u003eA.114\" kerf paired with a 22 deg. hook angle means faster material removal with less resistance, giving you efficient cutting performance whether you are ripping long boards or crosscutting thick structural beams\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e D1632X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 16-5\/16\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 32 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .114\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 22 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .079\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 4000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e 2X Lumber; Laminated Beams; Pressure Treated; Hardwoods; Softwoods\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eGeneral Purpose Wood Cutting - crosscuts and rip cuts in Paralam, rafters, beams, posts, LVL, oak, and pine\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of wood and engineered lumber can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for general purpose crosscuts and rip cuts in a wide range of materials including oak, pine, pressure treated lumber, laminated beams, Paralams, laminated veneer lumber, glulams, rafters, beams, and posts. It also works with 2X dimensional lumber, hardwoods, and softwoods.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is compatible with circular saws and cordless circular saws that accept a 1\" arbor and support a blade diameter of 16-5\/16\". Always confirm your saw's maximum RPM rating accommodates this blade's 4000 RPM maximum before use.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the ATB tooth geometry mean for cutting performance?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eATB stands for Alternate Top Bevel, meaning the teeth alternate between left and right bevel angles. This geometry allows the blade to score and shear wood fibers cleanly on both crosscuts and rip cuts, producing smooth results across a variety of wood species and engineered lumber products.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the Perma-SHIELD coating benefit blade performance during heavy use?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Perma-SHIELD non-stick coating reduces friction between the blade body and the material being cut. This helps prevent heat buildup, pitch and resin gumming on the blade, and corrosion over time - all of which can slow cutting speed and shorten blade life during extended use in lumber, pressure treated material, and composite wood products.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":39271489536161,"sku":"D1632X","price":115.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/z4br1kdo10t5j1aillh1.png?v=1785951930"},{"product_id":"diablo-d1660x-beam-saw-blade","title":"Diablo 16-5\/16\" x 60T Fine Finish Saw Blade for Wood D1660X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 16-5\/16\" x 60-Teeth Fine Finish Saw Blade for Wood\u003c\/strong\u003e is a large-diameter beam saw blade engineered for demanding timber framing applications. Built by Diablo and manufactured in Italy, this 60-tooth ATB blade is designed to handle heavy-duty cutting tasks involving LVL, glulam beams, and parallam posts while delivering a smooth, fine finish surface that requires little to no sanding. Sized specifically for the Makita beam saw, it cuts up to 6 1\/4 in. at 9 deg. and 4 3\/16 in. at 45 deg., making it a purpose-built solution for structural wood framing work in hardwoods, softwoods, pressure treated lumber, and laminated beams.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide teeth specifically formulated for each cutting application - delivers increased cutting performance and longer-lasting edge retention across demanding wood framing tasks\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion - keeps the blade running cooler and cleaner through extended cuts in resinous or pressure treated lumber\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf at.114 in. - removes less material per pass for faster, cleaner cuts with reduced waste and less strain on the saw motor\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing secures carbide tips against extreme impact - maximizes durability when cutting through dense hardwoods, laminated beams, and structural framing members\u003c\/li\u003e\n \u003cli\u003eHardened steel body at.079 in. plate thickness - provides a longer blade life and maintains a sharper cutting edge through heavy repeated use\u003c\/li\u003e\n \u003cli\u003e60 ATB tooth configuration with a 22 deg. hook angle - produces fine finish cuts in wood framing applications, leaving surfaces smooth enough to minimize secondary sanding\u003c\/li\u003e\n \u003cli\u003eRated to 4000 RPM maximum - compatible with both corded circular saws and cordless circular saws for versatile jobsite use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eDesigned specifically for large-format beam sawing - the 16-5\/16 in. diameter and 1 in. arbor fit the Makita beam saw directly, removing the guesswork from compatibility for timber framing crews\u003c\/li\u003e\n \u003cli\u003eCuts through the widest range of structural materials in one blade - from 2X dimensional lumber and softwoods to pressure treated posts, hardwoods, and laminated LVL beams, reducing blade changes on the job\u003c\/li\u003e\n \u003cli\u003eFine finish quality at beam-cutting scale - the 60-tooth ATB geometry leaves a smooth surface that requires little to no sanding, saving time on finish-sensitive framing details like exposed glulam or timber joinery\u003c\/li\u003e\n \u003cli\u003eBuilt to resist jobsite wear - the combination of Perma-SHIELD coating, Tri-metal brazing, and a hardened steel body protects the blade from heat buildup, corrosion, and impact damage during sustained heavy cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e D1660X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 16-5\/16\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 60 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .114\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 22 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .079\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 4000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e 2X Lumber; Laminated Beams; Pressure Treated; Hardwoods; Softwoods\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCutting Wood Framing\u003c\/li\u003e\n \u003cli\u003eTimber framing with LVL, glulam beams, and parallam posts\u003c\/li\u003e\n \u003cli\u003eFine finish cutting that requires little to no sanding after the cut\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat saw is this blade designed to fit?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis 16-5\/16 in. blade with a 1 in. arbor is designed for the Makita beam saw. It is compatible with corded circular saws and cordless circular saws that accept this diameter and arbor size.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat cutting depths does this blade achieve?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe D1660X cuts up to 6 1\/4 in. at 9 deg. and up to 4 3\/16 in. at 45 deg., making it well suited for cutting through large structural members including posts, beams, and heavy timber framing stock.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of wood and materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is rated for 2X lumber, laminated beams, pressure treated lumber, hardwoods, and softwoods - covering the full range of materials commonly encountered in structural timber framing and heavy wood construction.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the tooth geometry and why does it matter for finish quality?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe blade uses a 60-tooth ATB (Alternate Top Bevel) configuration with a 22 deg. hook angle. This geometry is optimized to produce a fine finish surface in wood, leaving cuts that require little to no sanding - an important advantage when working with exposed structural or finish-grade timber framing members.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35340328501409,"sku":"D1660X","price":143.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/vnxdfwpxxrlouplbqcjj.png?v=1785951930"},{"product_id":"diablo-d1040x-10-40t-diablo-general-purpose-chop-miter-and-table-saw-blad","title":"Diablo 10\" x 40T General Purpose Saw Blade for Wood D1040X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 10\" x 40-Teeth General Purpose Saw Blade for Wood\u003c\/strong\u003e is a versatile circular saw blade engineered for high quality crosscuts and rip cuts in hardwoods, softwoods, plywood, OSB, pressure treated lumber, and laminated beams. Designed by Diablo to handle a wide range of wood cutting tasks without swapping blades, this 10\" blade delivers smooth, clean results on both miter saws and table saws - making it an ideal everyday workhorse for carpenters, contractors, and woodworkers who need reliable performance across multiple materials and cut types.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide teeth, specifically formulated for each cutting application - delivers longer-lasting sharpness and cleaner cuts compared to standard carbide blends\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion - keeps the blade running smoothly and reduces drag when cutting resinous or pressure treated wood\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf at.098\" - removes less material per pass for faster cuts, less waste, and reduced motor strain on your saw\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing bonds carbide tips to withstand extreme impact - adds maximum durability when cutting dense hardwoods, laminated beams, or pressure treated lumber\u003c\/li\u003e\n \u003cli\u003eHardened steel body - maintains a longer service life and a sharper cutting edge over extended use, reducing the frequency of blade replacement\u003c\/li\u003e\n \u003cli\u003e40 ATB tooth configuration with a 15 deg. hook angle - provides an optimal balance between smooth rip cuts and quality crosscuts in solid wood and plywood\u003c\/li\u003e\n \u003cli\u003e5\/8\" arbor and 10\" diameter - fits stationary table saws, portable table saws, miter saws, and slide miter saws for maximum tool compatibility\u003c\/li\u003e\n \u003cli\u003eMaximum 7,000 RPM rating - safely handles the operating speeds of standard 10\" miter and table saw setups\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eOne blade handles both rip cuts and crosscuts in oak, pine, plywood, OSB, pressure treated lumber, and laminated beams - reducing the need to change blades between tasks and saving time on the job site or in the shop\u003c\/li\u003e\n \u003cli\u003eCompatible with four common saw types - stationary table saws, portable table saws, miter saws, and slide miter saws - making it a practical single-blade solution for professionals who use multiple tools\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD Non-stick Coating and TiCo Hi-Density carbide combine to extend blade life and maintain cut quality even in demanding applications like pressure treated lumber and laminated beams\u003c\/li\u003e\n \u003cli\u003eMade in the United States and backed by Diablo engineering, the.071\" plate thickness and hardened steel body offer a durable foundation that resists warping and maintains blade stability at high RPM\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eModel Number:\u003c\/strong\u003e D1040X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 40 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .098\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .071\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 7000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Miter Saw; Slide Miter Saw; Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Pressure Treated; Plywood; OSB; Laminated Beams\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eGeneral Purpose Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of wood can this Diablo blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed to cut hardwoods, softwoods, pressure treated lumber, plywood, OSB, and laminated beams. Common examples include oak and pine, making it suitable for a broad range of general purpose wood cutting tasks.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eCan this blade handle both rip cuts and crosscuts?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The 40 ATB tooth configuration and 15 deg. hook angle are engineered to perform high quality rip cuts with a smoother finish than dedicated ripping blades, as well as quality crosscuts in solid wood and plywood - all without needing to swap blades.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhich saws is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Diablo D1040X is compatible with miter saws, slide miter saws, stationary table saws, and portable table saws. The 5\/8\" arbor and 10\" diameter fit standard saw configurations across all four tool types.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the maximum safe operating speed for this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe blade is rated for a maximum of 7,000 RPM. Always verify that your saw's operating speed does not exceed this rating before use to ensure safe operation.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":35340336496801,"sku":"D1040X","price":23.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/pgubfqyxwdomutc8hc0h.png?v=1785951928"},{"product_id":"diablo-d0724a-7-1-4-inch-24-tooth-buy-10-get-1-free-with-coupon","title":"BUY 10 GET 1 FREE !!! Diablo D0724A 7-1\/4-Inch 24 Tooth ATB Framing Saw Blade-11 Blades for $89.50","description":"\u003cdiv\u003e\n \u003cp\u003e\u003cstrong\u003eDiablo 7-1\/4-Inch 24 Tooth ATB Framing Saw Blade\u003c\/strong\u003e is engineered for professional framers, roofers, and remodelers who demand fast, accurate cuts through pressure-treated wood, 2X lumber, plywood, hardwoods, OSB, and laminated beams. Powered by a newly optimized TiCo+ Hi-Density Carbide formula, this circular saw blade stays sharper up to 10X longer than standard carbide blades, dramatically reducing downtime and replacement costs on the jobsite. Its thin kerf design and Alternated Top Bevel (ATB) plus Tracking Point tooth grind work together to deliver effortless, ultra-smooth cutting performance in both corded and cordless circular saws - making it a top choice for general construction applications where speed and precision matter most.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eOptimized TiCo+ Hi-Density Carbide\u003c\/strong\u003e - extends teeth sharpness and durability, lasting up to 10X longer than standard blades, so you replace blades far less often on demanding framing jobs.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAlternate Top Bevel + Tracking Point tooth grind\u003c\/strong\u003e - enhances tracking control, minimizes vibration, and improves cutting accuracy for cleaner, faster cuts through framing lumber and engineered wood products.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThin kerf blade design (.059 in. kerf)\u003c\/strong\u003e - reduces material waste and AMP draw, delivering fast, effortless cuts in both cordless and corded saws, preserving battery life on cordless tools.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTri-metal shock resistant brazing\u003c\/strong\u003e - allows carbide tips to withstand extreme impact for maximum durability when cutting through nail-embedded or pressure-treated lumber.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD non-stick coating\u003c\/strong\u003e - resists heat, gumming, and corrosion for consistently smooth performance and longer service life across repeated cuts.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEnhanced Anti-Vibration design\u003c\/strong\u003e - provides the ideal combination of stability and rigidity, reducing operator fatigue and improving cut quality during extended use.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser cut arbor\u003c\/strong\u003e - reduces vibration and premature wear for accurate blade rotation when in use, contributing to straighter cuts and longer blade life.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIdeal for 2X lumber, plywood, hardwoods, engineered lumber, pressure-treated, OSB, and laminated beams\u003c\/strong\u003e - one versatile blade handles a wide range of general construction materials without switching out blades.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eOne Diablo framing blade replaces up to 10 standard carbide blades - for framers, roofers, and remodelers working high-volume jobs, this translates directly into fewer blade changes, less downtime, and lower overall tooling costs.\u003c\/li\u003e\n \u003cli\u003eThe ATB + Tracking Point tooth grind is specifically designed for straight, controlled cuts in framing lumber and engineered beams - delivering the kind of cutting accuracy that keeps walls plumb and assemblies tight without constant correction.\u003c\/li\u003e\n \u003cli\u003eWith a 15 deg. hook angle and a thin.059 in. kerf, this blade pulls through cuts aggressively while drawing less power - a real advantage when running cordless circular saws through full days of framing or roofing work.\u003c\/li\u003e\n \u003cli\u003eThe Perma-SHIELD non-stick coating and TiCo+ carbide work together to handle pressure-treated lumber, OSB, and laminated beams - materials known for gumming up and dulling standard blades quickly - without sacrificing cut quality or blade life.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProduct Group:\u003c\/strong\u003e Circular Saw Blades\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood Cutting\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub Category:\u003c\/strong\u003e Framing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-1\/4 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 24 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .040 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e General construction applications, framers, roofers, remodelers, and concrete formers\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0724A -10PK:\u003c\/strong\u003e 10 Pack - NO PROMO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD0724A -11(PROMO):\u003c\/strong\u003e BUY 10 GET 1 FREE\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCutting Wood Framing\u003c\/li\u003e\n \u003cli\u003eCutting pressure-treated wood and 2X lumber\u003c\/li\u003e\n \u003cli\u003eCutting plywood, hardwoods, OSB, and laminated beams\u003c\/li\u003e\n \u003cli\u003eGeneral construction framing, roofing, and remodeling applications\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of wood and materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Diablo framing blade is ideal for 2X lumber, plywood, hardwoods, engineered lumber, pressure-treated wood, OSB, and laminated beams - making it a single versatile solution for a wide range of general construction materials on the jobsite.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eIs this blade compatible with cordless circular saws?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The thin.059 in. kerf design reduces AMP draw, making it well-suited for both corded and cordless circular saws. The reduced power demand is especially beneficial for preserving battery runtime on cordless tools during extended framing or roofing work.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the TiCo+ Hi-Density Carbide improve blade longevity?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe optimized TiCo+ Hi-Density Carbide formula keeps the blade's 24 ATB teeth sharper up to 10X longer than standard carbide blades. Combined with tri-metal shock resistant brazing, the carbide tips are also designed to withstand extreme impact, such as cutting through nail-embedded or pressure-treated lumber.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the maximum safe operating speed for this blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis 7-1\/4-inch Diablo framing blade is rated for a maximum of 8000 RPM. Always confirm your circular saw's speed rating does not exceed this limit before use to ensure safe operation.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"10 Pack - NO PROMO","offer_id":40904660582561,"sku":"D0724A -10PK","price":89.5,"currency_code":"USD","in_stock":true},{"title":"BUY 10 GET 1 FREE","offer_id":40008661663905,"sku":"D0724A -11(PROMO)","price":100.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/D0724AFREE1_a4131108-489b-4df6-a48b-ce6125e75c75.jpg?v=1741897794"},{"product_id":"diablo-d0724a-7-1-4-inch-24-tooth-atb-framing-saw-blade-with-5-8-inch-and-diamond-knockout-arbor-see-promo","title":"Buy 100 Diablo D0724A Saw Blades \u0026 GET A Tool FOR FREE !!!","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 7-1\/4 in. x 24-Tooth Framing Saw Blade\u003c\/strong\u003e is engineered for maximum durability and precision in general construction applications, delivering effortless, ultra-smooth cuts through pressure-treated wood, 2X lumber, plywood, hardwoods, OSB, and laminated beams. Powered by a newly optimized TiCo+ Hi-Density Carbide formula and an Alternated Top Bevel plus Tracking Point tooth grind, this wood framing blade stays sharper dramatically longer than standard carbide blades - making it the go-to choice for framers, roofers, remodelers, and concrete formers who demand consistent cutting performance on every job. This listing covers a bulk purchase of 100 Diablo D0724A saw blades, and includes a free tool with your order.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eTiCo+ Hi-Density Carbide teeth\u003c\/strong\u003e - extends sharpness and durability up to 10X longer than standard carbide blades, reducing the frequency and cost of blade replacements on high-volume framing work.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAlternate Top Bevel plus Tracking Point tooth grind\u003c\/strong\u003e - enhances tracking control, minimizes vibration, and improves cutting accuracy for cleaner, faster cuts through dimensional lumber and engineered wood products.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThin kerf design at.059 in.\u003c\/strong\u003e - reduces material waste and amp draw, delivering fast, effortless cuts in both cordless and corded circular saws while extending battery runtime.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTri-metal shock resistant brazing\u003c\/strong\u003e - allows carbide tips to withstand extreme impact, providing maximum durability when cutting through tough or nail-embedded wood framing materials.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerma-SHIELD non-stick coating\u003c\/strong\u003e - resists heat, gumming, and corrosion for consistently smooth performance and extended blade life across a wide range of wood cutting applications.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEnhanced Anti-Vibration design\u003c\/strong\u003e - provides the ideal combination of stability and rigidity, reducing operator fatigue and improving control during extended framing, roofing, or remodeling cuts.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser cut arbor\u003c\/strong\u003e - reduces vibration and premature wear for accurate blade rotation when in use, ensuring straighter cuts and longer service life.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible with corded and cordless circular saws\u003c\/strong\u003e - with a maximum rating of 8,000 RPM and a 5\/8 in. arbor, this blade fits a wide range of standard 7-1\/4 in. circular saw platforms.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eOne Diablo D0724A blade replaces up to 10 standard carbide blades - buying 100 blades in bulk means dramatically fewer changeouts, less downtime, and lower total tooling cost across a busy framing or roofing crew.\u003c\/li\u003e\n \u003cli\u003eThe thin kerf and TiCo+ carbide formula make this blade equally effective in cordless saws, cutting amp draw and extending battery life - a direct productivity advantage for crews working away from power sources.\u003c\/li\u003e\n \u003cli\u003eWith a 15 deg. hook angle and 24-tooth ATB grind, this blade is purpose-built for the fast, aggressive ripping cuts required in framing, OSB sheathing, and laminated beam work - not a general-purpose compromise.\u003c\/li\u003e\n \u003cli\u003eMade in the United States, this Diablo framing blade is built to perform in demanding construction environments including pressure-treated lumber, engineered lumber, and hardwood applications where inferior blades fail prematurely.\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e D0724A\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProduct Group:\u003c\/strong\u003e Circular Saw Blades\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Wood Cutting\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSub Category:\u003c\/strong\u003e Framing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 7-1\/4 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 24 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .059 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .040 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e 2X Lumber; Plywood; Hardwoods; Pressure Treated; OSB; Laminated Beams; Rip Wood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 100 Blades\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United States\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCutting Wood Framing\u003c\/li\u003e\n \u003cli\u003eGeneral construction applications\u003c\/li\u003e\n \u003cli\u003eFraming, roofing, and remodeling\u003c\/li\u003e\n \u003cli\u003eConcrete forming with wood formwork\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat materials can the Diablo D0724A framing blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe D0724A is designed to cut 2X lumber, plywood, hardwoods, pressure-treated wood, OSB, laminated beams, and rip wood - making it suitable for a broad range of general construction framing and remodeling tasks.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the TiCo+ Hi-Density Carbide improve blade performance?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe optimized TiCo+ Hi-Density Carbide extends the sharpness and durability of the cutting teeth, keeping the blade sharp up to 10X longer than standard carbide blades. This means significantly fewer blade changes and lower long-term tooling costs on busy job sites.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eIs this blade compatible with cordless circular saws?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The thin kerf design at.059 in. reduces amp draw, making the D0724A well-suited for both corded and cordless circular saws. The blade fits any standard 7-1\/4 in. circular saw with a 5\/8 in. arbor and is rated up to 8,000 RPM.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is included with the purchase of 100 Diablo D0724A blades?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis bulk purchase includes 100 individual Diablo D0724A 7-1\/4 in. x 24-tooth framing saw blades, and a free tool is included with the order as part of this promotional offer.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":45771527880934,"sku":"D0724A -100","price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/metabohitachisaw.png?v=1743625968"},{"product_id":"diablo-d1484x-14-in-x-84-tooth-fine-finish-wood-cutting-saw-blade","title":"Diablo 14\" x 84T Fine Finish Saw Blade for Wood D1484X","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 14 in. x 84-Tooth Fine Finish Saw Blade for Wood\u003c\/strong\u003e is engineered for trim crews and woodworking professionals who demand glass-smooth crosscuts and rip cuts in hardwoods, softwoods, veneered plywood, melamine, and MDF. Designed by Diablo to maximize performance on sliding and chop-style miter saws, this 84-tooth ATB blade delivers the high tooth count and specialized cutting geometry needed to eliminate blowout and grabbing - giving you finish-quality results straight off the saw without secondary cleanup.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide tips specifically engineered for each application - harder, denser carbide holds a sharper edge longer for consistent fine-finish results through demanding production use\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD Non-stick Coating protects from heat, gumming, and corrosion - keeps the blade running cooler and cleaner, extending service life and reducing drag through gummy or resinous woods\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf (.118 in.) removes less material per pass - faster cutting, reduced waste, and less strain on your miter saw motor\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing attaches carbide tips to withstand extreme impact - maximum durability when cutting dense hardwoods, engineered panels, and layered materials like melamine\u003c\/li\u003e\n \u003cli\u003eHardened steel body warrants a longer life and sharper cutting edge - the rigid plate resists flex and vibration for truer, more accurate cuts over thousands of cycles\u003c\/li\u003e\n \u003cli\u003e84 ATB teeth with a 15 deg. hook angle produce extremely smooth surfaces - ideal for finish carpentry, cabinet work, trim installation, and any application where cut quality matters\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003ePurpose-built for fine finish cutting - the 84-tooth ATB configuration and specialized geometry minimize tearout and blowout on oak, pine, molding, veneered plywood, and melamine, so trim and cabinet work comes off the saw ready to install\u003c\/li\u003e\n \u003cli\u003eOptimized for large-format miter saws - the 14 in. diameter and 1 in. arbor are matched to sliding and chop-style miter saws used on jobsites and in woodworking shops, giving crews a blade that fits and performs correctly in the tools they already own\u003c\/li\u003e\n \u003cli\u003eBuilt to handle a wide range of panel and solid wood materials - from hardwoods like oak to engineered sheet goods like MDF and melamine, a single blade covers the variety of materials encountered in trim and finish carpentry work\u003c\/li\u003e\n \u003cli\u003eProfessional-grade construction with a 5,000 RPM maximum rating - the hardened steel body, TiCo carbide, and tri-metal brazing combine to deliver durability that holds up through high-volume production cutting, not just occasional shop use\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e D1484X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 14 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 84 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 1 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .118 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .087 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 5000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Miter Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Hardwoods; Softwoods; Veneered Plywood; Melamine; MDF\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFine Finish Wood Cutting\u003c\/li\u003e\n \u003cli\u003eHigh quality crosscuts and rip cuts in wood, plywood, and melamine\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of materials can this blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is rated for hardwoods, softwoods, veneered plywood, melamine, and MDF. It is specifically designed for fine finish crosscuts and rip cuts where surface quality is critical - including oak, pine, molding, and layered panel materials.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat saw is this blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe D1484X is designed for miter saws, including sliding and chop-style miter saws used in trim carpentry and finish work, as well as jobsite and workshop table saws. It features a 14 in. diameter, a 1 in. arbor, and a 5,000 RPM maximum rating.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat does the ATB tooth grind mean for cut quality?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eATB stands for Alternating Top Bevel - a tooth geometry where each tooth is beveled in alternating directions. On this blade, the 84-tooth ATB configuration combined with a 15 deg. hook angle produces extremely smooth cut surfaces while minimizing grabbing and blowout, making it well suited for finish-quality woodworking applications.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the Perma-SHIELD coating and why does it matter?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003ePerma-SHIELD is Diablo's non-stick coating applied to the blade body. It protects the steel plate from heat buildup, gumming from resins and adhesives, and corrosion - all of which can degrade cut quality and shorten blade life. The coating helps the blade run cleaner and cooler, particularly when cutting materials like melamine and MDF that can generate significant friction and resin transfer.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":40859799027873,"sku":"D1484X","price":90.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/D1484X_Main-Image20191022.png?v=1785951930"},{"product_id":"freud-6-x-10t-pro-dado-set-sd206","title":"Freud 6-Inch 10T Pro Dado Set with TiCo Carbide SD206","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eFreud 6\" Pro Dado Set\u003c\/strong\u003e is an Italian-crafted stacked dado set engineered to deliver clean, precise cuts in a wide range of wood materials - including hardwoods, softwoods, plywood, laminate, OSB, and chipboard. Sized at 6\" in diameter with a 5\/8\" arbor and 10 teeth per outer blade, this dado set is specifically designed for use with underpowered saws, making it an ideal choice for portable table saws, stationary table saws, and radial arm saws where torque and motor capacity may be limited. With its complete blade configuration and protective carrying case, this Freud dado set is a ready-to-use solution for woodworkers and finish carpenters who demand flat-bottom grooves, square shoulders, and virtually splinter-free results.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eNegative hook angles - reduce the aggressive bite of the blade during the cut, giving underpowered saws better control and reducing the risk of kickback\u003c\/li\u003e\n \u003cli\u003ePremium TiCo HI-Density Carbide Crosscutting Blend - a high-performance carbide formulation that maintains a sharp, clean cutting edge through demanding crosscuts in hardwoods, softwoods, and sheet goods\u003c\/li\u003e\n \u003cli\u003eSilver I.C.E. Coating - prevents pitch, sap, and resin buildup on the blade surface and helps the blade run cooler and cleaner, extending blade life between sharpenings\u003c\/li\u003e\n \u003cli\u003eAnti-kickback design on all blades and chippers - limits the amount of material each tooth can feed at once, reducing the force of any potential kickback event for safer operation\u003c\/li\u003e\n \u003cli\u003e6\" diameter with 5\/8\" arbor - compact sizing tailored for portable table saws and smaller stationary saws without sacrificing cutting quality\u003c\/li\u003e\n \u003cli\u003eThree 1\/8\" chippers plus three spacers included - provides flexible dado width adjustment to match a variety of groove and rabbet width requirements\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003ePurpose-built for underpowered saws - the negative hook angle geometry and compact 6\" diameter make this set a natural fit for portable job-site table saws and benchtop saws that struggle with full 8\" dado sets, delivering professional results without overloading the motor\u003c\/li\u003e\n \u003cli\u003eVersatile material compatibility - whether you are cutting hardwoods, softwoods, laminate, plywood, OSB, or chipboard, the TiCo HI-Density Carbide blend handles a broad range of shop and job-site materials in a single set\u003c\/li\u003e\n \u003cli\u003eReady-to-use out of the box - the set ships complete with 2 outer blades, 3 chippers, spacers, a shim set, and a carrying case, so no additional accessories are needed to get started cutting precise dadoes and grooves\u003c\/li\u003e\n \u003cli\u003eCleaner cuts with less maintenance - the Silver I.C.E. Coating actively resists buildup during cutting, meaning the blades stay cleaner longer and require less frequent cleaning between uses on sticky or resinous materials\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Freud\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e SD206\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 6\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 10\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eChippers:\u003c\/strong\u003e (3) 1\/8\" Chippers, (3) spacers\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Radial Arm Saw; Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Laminate; Plywood; OSB; Chipboard\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Ideal for underpowered saws\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Pro Dado Sets\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eCreating clean edges and square shoulders in dadoes and rabbets\u003c\/li\u003e\n \u003cli\u003eMaking flat-bottom grooves in hardwoods, softwoods, plywood, laminate, OSB, and chipboard\u003c\/li\u003e\n \u003cli\u003eProducing virtually splinter-free cuts in sheet goods and solid wood workpieces\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhat's Included\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e2x outer blades (6\" diameter, 10 teeth, 5\/8\" arbor)\u003c\/li\u003e\n \u003cli\u003e3x 1\/8\" chippers\u003c\/li\u003e\n \u003cli\u003e3x spacers\u003c\/li\u003e\n \u003cli\u003eShim set\u003c\/li\u003e\n \u003cli\u003eCarrying case\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat makes this dado set suitable for underpowered saws?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Freud SD206 uses negative hook angles on its outer blades and a compact 6\" diameter, both of which reduce the load placed on the saw's motor during the cut. This geometry limits how aggressively the blade pulls into the material, making it well matched to portable table saws, benchtop saws, and other saws with limited motor output compared to full-size cabinet saws.\u003c\/dd\u003e\n\n \u003cdt\u003e\u003cstrong\u003eWhat groove widths can I cut with this dado set?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe set includes 2 outer blades and 3 chippers, each measuring 1\/8\" in width, along with 3 spacers and a shim set. By combining different numbers of chippers and spacers, you can dial in a range of dado widths to suit your specific joinery needs.\u003c\/dd\u003e\n\n \u003cdt\u003e\u003cstrong\u003eWhat types of saws are compatible with the SD206?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis dado set is compatible with radial arm saws, stationary table saws, and portable table saws that accept a 5\/8\" arbor. Always verify your saw's dado capacity and maximum dado blade diameter before installation.\u003c\/dd\u003e\n\n \u003cdt\u003e\u003cstrong\u003eWhat is Silver I.C.E. Coating and how does it help during cuts?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eSilver I.C.E. Coating is Freud's specialized blade coating that prevents pitch, resin, and debris from building up on the blade surface during cutting. This keeps the blades running cooler and cleaner throughout use, which helps maintain cut quality and reduces the frequency of blade cleaning - particularly useful when cutting resinous softwoods, laminate, or chipboard.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"Freud","offers":[{"title":"Default Title","offer_id":42243365929190,"sku":"FRE-SD206","price":97.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/products\/71tHu51XlrS._AC_SL1500.jpg?v=1785951958"},{"product_id":"diablo-d0840x-8-1-4-x-40-teeth-finishing-saw-blade-for-wood","title":"Diablo D0840X 8-1\/4\" x 40-Teeth Finishing Saw Blade for Wood","description":"\u003cdiv\u003e\n \u003cp\u003eThe \u003cstrong\u003eDiablo 8-1\/4\" x 40-Teeth Finishing Saw Blade for Wood\u003c\/strong\u003e is engineered for smooth, professional-quality finish crosscuts in hardwood, softwood, and plywood. Designed by Diablo for use with circular saws, cordless circular saws, and both stationary and portable table saws, this 40-tooth ATB blade delivers the cleaner, smoother edges that finish carpentry demands - without sacrificing the cutting speed and long service life you need on the jobsite. Whether you are working with decking, fencing, fascia, 1X boards, or sheet goods like plywood and OSB, this blade provides an excellent combination of performance and durability that sets it apart from standard framing blades.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eTiCo Hi-Density carbide - specifically formulated for finish wood cutting applications, delivering enhanced performance and longer-lasting sharpness compared to standard carbide tips\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD Non-stick Coating - protects the blade body from heat, gumming, and corrosion, which extends blade life and helps maintain clean, consistent cuts over time\u003c\/li\u003e\n \u003cli\u003eSuper thin laser cut kerf at.094\" - removes less material per pass for faster cuts, reduced waste, and cleaner finished edges in hardwood, softwood, and sheet goods\u003c\/li\u003e\n \u003cli\u003eTri-metal shock resistant brazing - bonds carbide tips with exceptional strength so they withstand extreme impact, reducing the risk of tip loss and extending overall blade durability\u003c\/li\u003e\n \u003cli\u003eHardened steel body - provides a longer service life and supports a sharper, more consistent cutting edge across a wide range of wood materials\u003c\/li\u003e\n \u003cli\u003e40 ATB (Alternate Top Bevel) tooth geometry - the configuration preferred for finish cuts, producing smooth edges that require less sanding or cleanup on hardwoods, laminated beams, and pressure-treated lumber\u003c\/li\u003e\n \u003cli\u003e15 deg. hook angle - optimized for finish crosscutting, helping to reduce splintering and deliver clean results on plywood and solid wood alike\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eIdeal upgrade from a framing blade - the 40-tooth ATB design and thin.094\" kerf deliver a noticeably smoother cut on decking, fascia, and fencing where surface appearance matters\u003c\/li\u003e\n \u003cli\u003eCompatible with a wide range of tools - fits circular saws, cordless circular saws, stationary table saws, and portable table saws with a standard 5\/8\" arbor, making it a versatile choice for contractors and finish carpenters\u003c\/li\u003e\n \u003cli\u003eBuilt for jobsite durability - the Perma-SHIELD Non-stick Coating and Tri-metal shock resistant brazing protect the blade from heat buildup and impact, reducing downtime and replacement costs on demanding job sites\u003c\/li\u003e\n \u003cli\u003eCuts a broad range of materials - rated for plywood, 2X lumber, pressure-treated wood, OSB, hardwoods, and laminated beams, covering the full range of materials common in finish carpentry and exterior trim work\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e D0840X\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 8-1\/4\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 40 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .094\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .063\"\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 8000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Circular Saw; Cordless Circular Saw; Stationary Table Saw; Portable Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Plywood; 2X Lumber; Pressure Treated; OSB; Hardwoods; Laminated Beams\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eFinish Wood Cutting\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat types of wood can this Diablo blade cut?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is designed for use with plywood, 2X lumber, pressure-treated wood, OSB, hardwoods, and laminated beams. It is specifically suited for smooth finish crosscuts in hardwood, softwood, or plywood, including jobsite applications like decking, fencing, fascia, and 1X boards.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat tools is this 8-1\/4\" blade compatible with?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is compatible with circular saws, cordless circular saws, stationary table saws, and portable table saws. It uses a standard 5\/8\" arbor and has a maximum rated speed of 8000 RPM.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does this finishing blade differ from a standard framing blade?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis Diablo finishing blade features 40 ATB (Alternate Top Bevel) teeth and a 15 deg. hook angle, which together produce a smoother cut edge than typical framing blades. The result is cleaner, finish-quality cuts on wood surfaces where appearance matters, while still offering excellent cutting speed and long blade life.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat is the kerf width of this blade, and why does it matter?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe kerf is.094\", which is a super thin laser cut kerf. A thinner kerf removes less material per pass, resulting in faster cuts, less waste, and cleaner finished edges - especially important when working with hardwoods, plywood, and other finish materials where precision is critical.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"Default Title","offer_id":46551710105830,"sku":"D0840X","price":29.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/files\/8-1-4-x-40-teeth-finishing-saw-blade-for-wood_ca145df5-1149-4c91-861a-1565b7ec4fc6.png?v=1785951927"},{"product_id":"freud-d1030x-diablo-10-30-tooth-plywood-ripping-saw-blade-5-8-arbor","title":"Diablo 10\" x 30 Teeth Ripping Saw Blade for Plywood D1030X","description":"\u003cdiv\u003e\n \u003cp\u003e\u003cstrong\u003eDiablo 10-Inch 30-Tooth Plywood Ripping Saw Blade\u003c\/strong\u003e delivers superior rip cuts through plywood, OSB, hardwoods, softwoods, and pressure-treated wood with an exclusive Tracking Point tooth design engineered to keep cuts straight and extend blade life well beyond conventional ripping blades. Designed by Diablo for use in both portable and stationary table saws, this 10 in. ripping blade combines TiCo Hi-Density carbide tips, a Super Thin Kerf design, and a Perma-SHIELD non-stick coating to reduce heat, minimize resistance, and produce accurate, clean rip cuts in demanding framing, roofing, remodeling, and concrete forming applications.\u003c\/p\u003e\n\n \u003ch3\u003eKey Features\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eHigh-performance TiCo Hi-Density carbide tips - provide extreme durability and maximum cutting life so the blade stays sharp longer under heavy ripping workloads\u003c\/li\u003e\n \u003cli\u003eTracking Point tooth design acts as a \"rudder\" to provide straight cuts and control carbide wear on the tooth for up to five times longer cutting life versus other blades - meaning fewer blade changes and more consistent results over time\u003c\/li\u003e\n \u003cli\u003eTracking Point doubles the carbide surface area for greater impact resistance and double the durability in plywood ripping applications - reducing chipping and carbide loss when cutting dense sheet goods\u003c\/li\u003e\n \u003cli\u003eTracking Point delivers extreme cutting efficiency in corded and cordless table and portable table saws - making this blade compatible with a wide range of job site setups\u003c\/li\u003e\n \u003cli\u003eAdvanced anti-vibration design features laser cut stabilizer vents to trap noise and vibration, providing the ideal combination of stability and rigidity for precise, clean cuts - reducing operator fatigue and improving cut quality\u003c\/li\u003e\n \u003cli\u003eLaser-cut Super Thin Kerf Design (.094 in.) allows the blade to glide through wood materials offering less resistance and heat build-up for superior ease of cut, accuracy and long cutting life - especially valuable when running cordless saws where power conservation matters\u003c\/li\u003e\n \u003cli\u003ePerma-SHIELD non-stick aluminum alloy coating protects the blade against heat, gumming and corrosion - keeping the blade surface clean and extending service life even in resinous or pressure-treated lumber\u003c\/li\u003e\n \u003cli\u003eTri-Metal Shock Resistant Brazing - a three metal brazing system provides a high performance shock absorber behind every tooth to withstand extreme impact for maximum durability, protecting tip integrity during aggressive ripping\u003c\/li\u003e\n \u003cli\u003eComputer-controlled Precision Tensioning keeps the blade flat for superior quality finish - reducing wobble and deflection for repeatable, accurate cuts across the full range of supported materials\u003c\/li\u003e\n \u003cli\u003eLaser Cut Arbor reduces vibration and premature wear for accurate blade rotation on corded and cordless saws - contributing to longer bearing and blade life\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eWhy This Product\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eThe only 10 in. ripping blade to include Tracking Point tooth design - giving framers, roofers, remodelers, and concrete formers a purpose-built advantage when sheathing walls, roofs, and subfloor applications with plywood and OSB\u003c\/li\u003e\n \u003cli\u003eHandles rip cuts ranging from 3\/4 in. to 2-3\/4 in. material thickness in plywood, OSB, hardwoods, softwoods, and pressure-treated wood - covering the full range of lumber and sheet goods encountered on most residential and light commercial job sites\u003c\/li\u003e\n \u003cli\u003eThe combination of Super Thin Kerf and Perma-SHIELD coating means less drag, less heat buildup, and a blade that glides more smoothly - translating to cleaner cuts and reduced motor strain in both corded and cordless saws\u003c\/li\u003e\n \u003cli\u003eTiCo carbide tips coupled with Tri-Metal Shock Resistant Brazing and Computer-controlled Precision Tensioning work together to deliver a blade engineered for maximum durability and flat, stable performance over an extended cutting life\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eSpecifications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Diablo\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 10 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTeeth:\u003c\/strong\u003e 30 ATB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eArbor:\u003c\/strong\u003e 5\/8 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eKerf:\u003c\/strong\u003e .094 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHook Angle:\u003c\/strong\u003e 15 deg.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlate:\u003c\/strong\u003e .071 in.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum RPM:\u003c\/strong\u003e 6000\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Tools:\u003c\/strong\u003e Portable Table Saw; Stationary Table Saw\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible Materials:\u003c\/strong\u003e Hardwoods; Softwoods; Pressure Treated; Plywood; OSB; Rip Wood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUsage:\u003c\/strong\u003e Superior quality rip cuts (3\/4 in. - 2-3\/4 in.) in plywood, OSB, hardwoods, softwoods and pressure-treated wood\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e Italy\u003c\/li\u003e\n \u003c\/ul\u003e\n \u003ch3\u003eAvailable Pack Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1030X:\u003c\/strong\u003e 1 Ea\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD1030X -10P:\u003c\/strong\u003e 10 Pk\u003c\/li\u003e\n\u003c\/ul\u003e\n\n \u003ch3\u003eApproved Applications\u003c\/h3\u003e\n \u003cul\u003e\n \u003cli\u003eRipping plywood and OSB for wall and roof sheathing\u003c\/li\u003e\n \u003cli\u003eRipping hardwoods and softwoods in portable and stationary table saw setups\u003c\/li\u003e\n \u003cli\u003eCutting pressure-treated lumber for outdoor framing and decking applications\u003c\/li\u003e\n \u003cli\u003eConcrete forming work requiring precise, clean rips in plywood and sheet goods\u003c\/li\u003e\n \u003cli\u003eRemodeling and renovation projects involving dimensional lumber and engineered wood panels\u003c\/li\u003e\n \u003c\/ul\u003e\n\n \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n \u003cdl\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat makes the Tracking Point tooth design different from standard ripping blade teeth?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Tracking Point tooth design acts as a \"rudder\" to guide the blade through cuts in a straight line while controlling carbide wear across the tooth face. It doubles the carbide surface area compared to conventional tooth designs, resulting in greater impact resistance and up to five times longer cutting life versus other blades in plywood ripping applications.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eIs this blade compatible with cordless table saws?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eYes. The Super Thin Kerf design reduces resistance and heat buildup, and the Tracking Point design delivers extreme cutting efficiency specifically in both corded and cordless table saws and portable table saws, making it a strong choice for job sites where cordless tools are the primary setup.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eWhat material thicknesses can this blade handle?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThis blade is rated for superior quality rip cuts in material ranging from 3\/4 in. to 2-3\/4 in. thick, covering plywood, OSB, hardwoods, softwoods, and pressure-treated wood.\u003c\/dd\u003e\n \u003cdt\u003e\u003cstrong\u003eHow does the Perma-SHIELD coating benefit the blade during use?\u003c\/strong\u003e\u003c\/dt\u003e\n \u003cdd\u003eThe Perma-SHIELD non-stick aluminum alloy coating protects the blade surface against heat, gumming, and corrosion. This is especially useful when cutting resinous woods or pressure-treated lumber, where pitch and chemical residue can build up quickly on uncoated blades and reduce cutting performance over time.\u003c\/dd\u003e\n \u003c\/dl\u003e\n\u003c\/div\u003e","brand":"DIABLO","offers":[{"title":"1 Ea","offer_id":48028164391142,"sku":"D1030X","price":30.57,"currency_code":"USD","in_stock":true},{"title":"10 Pk","offer_id":48028164423910,"sku":"D1030X -10P","price":254.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0398\/5188\/4705\/files\/idmjtitqhysfomvim5gn.png?v=1785951928"}],"url":"https:\/\/factorydirectsupply.com\/collections\/diablo-circular-saw-blades-wood.oembed","provider":"Factory Direct Supply","version":"1.0","type":"link"}